Seco-Larm SD-6276-SS1Q Manual

Seco-Larm Ikke kategoriseret SD-6276-SS1Q

Læs gratis den danske manual til Seco-Larm SD-6276-SS1Q (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 64 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 32.5 anmeldelser. Har du et spørgsmål om Seco-Larm SD-6276-SS1Q, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Outdoor Piezoelectric

Request-to-Exit Pushbuttons

Manual

Features:

 Piezoelectric push buttons for indoor or

outdoor use (IP65)

 LED ring around button changes from

green to red or red to green when the

button is pressed

 Timed or toggle output

 Includes separate manual override button

in case power to piezoelectric push button

fails

 Relay rated 5A@24VDC with two

individually programmable outputs

(NO/NC)

SD-6176-SSQ Slimline plate "TOUCH/EXIT"

SD-6176-SS1Q Slimline plate "EXIT/SALIDA"

SD-6176-SSVQ Slimline plate, manual override

SD-6276-SSQ Single-Gang plate, "TOUCH/EXIT"

SD-6276-SS1Q Single-Gang plate, "EXIT/SALIDA"

SD-6276-SSVQ Single-Gang plate, manual override

ENFORCER Outdoor Piezoelectric Request-to-Exit Pushbuttons

2 SECO-LARM U.S.A., Inc.

1x Piezoelectric push button 2x Wires for manual override

1x Manual 2x Mounting screws

Operating voltage 12~24VDC

Contact rating 2.5A@24 VAC/VDC

Ring

LED

Standby Red

Active Green

Output time 1~30s, Toggle

IP rating IP65

Operating temperature 32°~158° F (0°~70° C)

Plate material Stainless steel

Weight

Single-Gang 3.5-oz (99g)

Single-Gang w/ manual override 4-oz (113g)

Slimline 2.6-oz (74g)

Slimline w/ manual override 3.1-oz (88g)

Overview:

Introduction:

Parts List:

Installation:

*SD-6176-SSVQ and SD-6276-SSVQ with Manual Override button shown, other models similar.

Slimline Single-Gang Side View Rear View

*SD-6176-SSVQ and SD-6276-SSVQ only.

1. Prepare wiring to provide 12~24 VDC power and connect devices to the relay outputs.

NOTE: The device includes one relay with two outputs. Outputs trigger simultaneously but can be configured

independently. To set the output modes, see Relay Output Modes on page 3.

2. Remove the plastic cover from the rear of the switch and carefully pierce the rubber grommet.

3. SD-6176-SSVQ and SD-6276-SSVQ: Wire the manual override button. See page 3.

4. Wire the switch according to the diagram on the right.

5. Connect (-) and (+) to a 12~24 VDC power source.

6. Connect other devices to Output 1 or 2.

7. Replace the plastic switch cover and screw the plate

onto the mounting surface

minal Block

LED Rin

Piezoelectric

pushbutton

Manual

Override

Button*

Manual

Override

Button*

Timer

Adjustment

Output mode

Selection

LED color

Selection

Terminal

blocks

Relay adjust

Buzzer

adjust

(Plastic switch

cover removed)

15/8" (42mm)

/8" (42mm) 23/4" (70mm)

41/2"

(114mm

)

Produkt Specifikationer

Mærke:	Seco-Larm
Kategori:	Ikke kategoriseret
Model:	SD-6276-SS1Q

Har du brug for hjælp?

Hvis du har brug for hjælp til Seco-Larm SD-6276-SS1Q stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Seco-Larm Manualer

Seco-Larm SD-6276-SSVQ Manual

29 August 2024

Seco-Larm E-942FC-1K3SQ Manual

29 August 2024

Seco-Larm SD-6276-SS1Q Manual

29 August 2024

Seco-Larm E-936-S45RRGQ Manual

29 August 2024

Seco-Larm SD-969-S18Q Manual

29 August 2024

Seco-Larm E-941SA-600PQ Manual

29 August 2024

Seco-Larm SA-025Q Manual

29 August 2024

Seco-Larm SS-075CQ Manual

29 August 2024

Seco-Larm SD-6176-SS1Q Manual

29 August 2024

Seco-Larm SM-226LQ Manual

29 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman MiVue 540 Manual

2 August 2025

Pro User PSI2000TX Manual

2 August 2025

Guede 5T Manual

2 August 2025

Navman EZY40 Manual

2 August 2025

Thule Chariot Ski kit Manual

2 August 2025

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025