Seco-Larm E-936-S45RRGQ Manual


Læs gratis den danske manual til Seco-Larm E-936-S45RRGQ (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Seco-Larm E-936-S45RRGQ, eller vil du spørge andre brugere om produktet?

Side 1/4
Conforms to UL 325
Caution:
This sensor was not designed to prevent bodily injury or loss of life.
This sensor was not designed for use in environments where explosive gases may be present.
Use of this sensor in certain security applications may be regulated by local laws or codes. SECO-LARM
is not responsible for compliance with such laws or codes.
Features:
Range 45 ft (14m)
Weatherproof (IP66) construction for
indoor/outdoor usage
Pre-wired t (2m) cord 6.5f
Bracket and mounting hardware included
for both sensor and reflector
Adjustable sensing range
Compact size
Typical Applications:
Sensor for garage doors or outdoor gates
Entry detection for store fronts
Assist in measuring parking distance
Light on type
IMPORTANT: The E- -S45RRGQ 936
conforms to UL325 for gate operators that
use the N.C. or 10kΩ resistor for
monitoring.
E- 6-S45RRGQ 93
Retro-Reflective Photoelectric Beam Sensor
Manual
ENFORCER Retro-Reflective Photoelectric Beam Sensor
2 SECO-LARM U.S.A., Inc.
Type
Retro-reflective
Sensing range
0.5~ ft (0.2~14 m) 45
Operating voltage
12 30V- / 60Hz, 100mA DC AC
Standby
70mA@12VDC
Active
55mA@12VDC
Response time
10ms
Light source
IR LED
LED indicators
Yellow LED (Alignment), Red LED (Power on)
Trigger output
SPDT Relay output
(NO/NC/COM, with built-in esistor on N.O. output) 10KΩ r
Switching capacity
2A@30VAC/VDC
Enclosure
IP66 Weatherproof
Operating temperature
-4~131° F (-20~55° C)
Mounting brackets for sensor and reflector
Included
Specifications:
Dimensions:
Reflector
Transmitter/Receiver
3/8″ (9mm)
3
/16 ″ (4.5mm) thru holes
31/4
(82mm)
®
13
/16
″ (20.5mm)
21
/2
(63mm)
3
/16
(5mm)
19/16 (39mm)
2″
(51mm)
11
/8
(29mm)
61/2′ (2m) cable
1/4″ (6mm) diameter
Parts List:
1x
Transmitter/Receiver
1x
Round reflector
1x
Adjustment screwdriver
1x
13/16 " Phillips/slotted wood screw
1x
Plastic wall anchor
4x
13/16" Phillips wood screws
2x
13
/4" Phillips machine screws
2x
Hex nuts
2x
1/4" Phillips/slotted machine screws
1x
5/8
" Phillips/slotted machine screw
1x
Reflector hood for round/square reflector
1x
Sensor mounting bracket E-931ACC-BLS5Q
1x
Sensor mounting bracket E-931ACC-BLS1Q
Sample Installations:
Garage Door
Main Entrance Door
Store Entrance
Parking Distance Monitor
Entry Gate


Produkt Specifikationer

Mærke: Seco-Larm
Kategori: Ikke kategoriseret
Model: E-936-S45RRGQ

Har du brug for hjælp?

Hvis du har brug for hjælp til Seco-Larm E-936-S45RRGQ stil et spørgsmål nedenfor, og andre brugere vil svare dig