Seco-Larm SD-6276-SSVQ Manual

Seco-Larm Ikke kategoriseret SD-6276-SSVQ

Læs gratis den danske manual til Seco-Larm SD-6276-SSVQ (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Seco-Larm SD-6276-SSVQ, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
®
Outdoor Piezoelectric
Request-to-Exit Pushbuttons
Manual
Features:
Piezoelectric push buttons for indoor or
outdoor use (IP65)
LED ring around button changes from
green to red or red to green when the
button is pressed
Timed or toggle output
Includes separate manual override button
in case power to piezoelectric push button
fails
Relay rated 5A@24VDC with two
individually programmable outputs
(NO/NC)
SD-6176-SSQ Slimline plate "TOUCH/EXIT"
SD-6176-SS1Q Slimline plate "EXIT/SALIDA"
SD-6176-SSVQ Slimline plate, manual override
SD-6276-SSQ Single-Gang plate, "TOUCH/EXIT"
SD-6276-SS1Q Single-Gang plate, "EXIT/SALIDA"
SD-6276-SSVQ Single-Gang plate, manual override
ENFORCER Outdoor Piezoelectric Request-to-Exit Pushbuttons
2 SECO-LARM U.S.A., Inc.
1x Piezoelectric push button 2x Wires for manual override
1x Manual 2x Mounting screws
Operating voltage 12~24VDC
Contact rating 2.5A@24 VAC/VDC
Ring
LED
Standby Red
Active Green
Output time 1~30s, Toggle
IP rating IP65
Operating temperature 32°~158° F (0°~70° C)
Plate material Stainless steel
Weight
Single-Gang 3.5-oz (99g)
Single-Gang w/ manual override 4-oz (113g)
Slimline 2.6-oz (74g)
Slimline w/ manual override 3.1-oz (88g)
Overview:
Introduction:
Parts List:
Installation:
*SD-6176-SSVQ and SD-6276-SSVQ with Manual Override button shown, other models similar.
Slimline Single-Gang Side View Rear View
*SD-6176-SSVQ and SD-6276-SSVQ only.
1. Prepare wiring to provide 12~24 VDC power and connect devices to the relay outputs.
NOTE: The device includes one relay with two outputs. Outputs trigger simultaneously but can be configured
independently. To set the output modes, see Relay Output Modes on page 3.
2. Remove the plastic cover from the rear of the switch and carefully pierce the rubber grommet.
3. SD-6176-SSVQ and SD-6276-SSVQ: Wire the manual override button. See page 3.
4. Wire the switch according to the diagram on the right.
5. Connect (-) and (+) to a 12~24 VDC power source.
6. Connect other devices to Output 1 or 2.
7. Replace the plastic switch cover and screw the plate
onto the mounting surface
Te
r
minal Block
LED Rin
g
Piezoelectric
pushbutton
Manual
Override
Button*
Manual
Override
Button*
Timer
Adjustment
Output mode
Selection
LED color
Selection
Terminal
blocks
Relay adjust
Buzzer
adjust
(Plastic switch
cover removed)
15/8" (42mm)
15
/8" (42mm) 23/4" (70mm)
41/2"
(114mm
)

Produkt Specifikationer

Mærke: Seco-Larm
Kategori: Ikke kategoriseret
Model: SD-6276-SSVQ

Har du brug for hjælp?

Hvis du har brug for hjælp til Seco-Larm SD-6276-SSVQ stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Seco-Larm Manualer

Seco-Larm

Seco-Larm SD-6276-SSVQ Manual

29 August 2024
Seco-Larm

Seco-Larm E-942FC-1K3SQ Manual

29 August 2024
Seco-Larm

Seco-Larm SD-6276-SS1Q Manual

29 August 2024
Seco-Larm

Seco-Larm E-936-S45RRGQ Manual

29 August 2024
Seco-Larm

Seco-Larm SD-969-S18Q Manual

29 August 2024
Seco-Larm

Seco-Larm E-941SA-600PQ Manual

29 August 2024
Seco-Larm

Seco-Larm SA-025Q Manual

29 August 2024
Seco-Larm

Seco-Larm SS-075CQ Manual

29 August 2024
Seco-Larm

Seco-Larm SD-6176-SS1Q Manual

29 August 2024
Seco-Larm

Seco-Larm SM-226LQ Manual

29 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock

Hozelock 5102 Manual

2 August 2025
ART

ART 310 Manual

2 August 2025
Gorenje

Gorenje KAS53ZDCINVFT Manual

2 August 2025
Gorenje

Gorenje KAS35ZDCINVFT Manual

2 August 2025
Navman

Navman MY450LMT Manual

2 August 2025
Navman

Navman MiVue 745 Manual

1 August 2025
Hitachi

Hitachi WR22SE Manual

1 August 2025
Synology

Synology M2D20 Manual

1 August 2025
Fluke

Fluke FibertLert-125 Manual

1 August 2025
Buffalo

Buffalo GC882 Manual

1 August 2025