Sescom SES-X-FA2LRT01 Manual

Sescom Audio/video konverter SES-X-FA2LRT01

Læs gratis den danske manual til Sescom SES-X-FA2LRT01 (4 sider) i kategorien Audio/video konverter. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Sescom SES-X-FA2LRT01, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

SES-X-FA2LRT01 2 CH Unbalanced RCA Line Level

Audio over Fiber Extender

FEATURES



2-Channel RCA Audio over Fiber with Singlemode Simplex ST Fiber Connector

 24-Bit Digitally Encoded Analog Audio

 Transmission Distance up to 12.4 miles over Singlemode Fiber

 Adjustment Free Plug & Play Operation

 Enable Cascaded Audio Setups

 1 Year Warranty

 FCC & RoHS Compliant

Set Up Instructions

1. Secure the units in a safe location, where they will not be subject to impact and where there is room around the

unit so nothing will interfere with the fiber optic cabling causing it to bend sharply in a tight radius in any way that

can severely affect the signal transfer.

2. Use proper cable management and handling for routing fiber optic cable.

3. Carefully connect your source(s) to the transmitter input(s) and the receiver unit output(s) to your receiving device

input(s) using the RCA connectors on the transmitter and on the receiver unit.

4. CLEAN* the ST fiber optical cable contacts that will be used for connecting the Tx and Rx units and attach the fiber

cable to the ST connections and secure, as you would secure a bayonet BNC. While pressing lightly in on the

connector, twist it in a clockwise direction about 1/8 to 1/4 of a turn and then release. The connector should stay

inserted and have backwards spring pressure holding the bayonet in place.

5. Connect the included power supplies to the transmitter and receiver units, and plug them both into an AC power

source (100-240VAC 50/60Hz).

* CLEAN: All fiber optical cable contacts require cleaning each time before inserting into a device’s outputs or

inputs. Failure to clean the contacts can damage the unit’s optics over time and can also permanently damage

the cable and the device.

Use cleaning kits designed specifically for fiber optics.

SES-X-FA2LRT01 AUDIO FIBER EXTENDER

SPECIFICATIONS

Unity Gain 0dB In, 0dB Out

Total Harmonic Distortion <0.05%

Signal to Noise Ratio

> 90dB Ref. 4dBu, A Weighting

Maximum Balanced Input Signal 7dBu

Max Line Input/Output Voltage 5Vp-p

Optical Wavelength 1310nm

Frequency Response 20Hz—20KHz

Sample Rate 48KHz, 24K bit rate

Input Power 5VDC/1A

Unit Dimensions Each Unit 4.125 x 4.25/5.0 with fiber connectors x 1.25 in

Power Consumption <1W

Includes (2) 5VDC/1A Power Adapters

Produkt Specifikationer

Mærke:	Sescom
Kategori:	Audio/video konverter
Model:	SES-X-FA2LRT01

Har du brug for hjælp?

Hvis du har brug for hjælp til Sescom SES-X-FA2LRT01 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Audio/video konverter Sescom Manualer

Sescom SES-X-FA2LRT01 Manual

8 Juni 2025

Sescom SES-X-FA2LXBT01 Manual

2 April 2025

Sescom SES-X-FA2LRL01 Manual

4 September 2024

Sescom SES-4X1F3M-CATBX Manual

4 September 2024

Sescom SES-X Manual

19 Juni 2024

Sescom SES-4XLR1F3M-CAT Manual

19 Juni 2024

Sescom SES-4X1M3F-CATBX Manual

19 Juni 2024

Audio/video konverter Manualer

Nyeste Audio/video konverter Manualer

Tripp Lite N785-H01-SFP Manual

31 Juli 2025

Tripp Lite N785-I01-SFP-DU Manual

31 Juli 2025

Tripp Lite N785-H01-SCMM Manual

31 Juli 2025

Tripp Lite N785-P01-SC-MM1 Manual

31 Juli 2025

Tripp Lite N785-001-SC-MM Manual

31 Juli 2025

Tripp Lite P579-009-8K6 Manual

31 Juli 2025

Tripp Lite N785-P01-LC-MM1 Manual

30 Juli 2025

Tripp Lite N785-CH12 Manual

30 Juli 2025

Tripp Lite N785-H01-SFP-D Manual

30 Juli 2025

Tripp Lite N785-001-SC Manual

30 Juli 2025