Sescom SES-X-FA8LTT01 Manual

Sescom AV forlænger SES-X-FA8LTT01

Læs gratis den danske manual til Sescom SES-X-FA8LTT01 (4 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Sescom SES-X-FA8LTT01, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

SES X FA8LTT01 8 CH Balanced Line Level - -

Audio over Fiber Extender

FEATURES

• 8 Channel Audio over Fiber with Singlemode Connector-

• 24- Bit Digitally Encoded Analog Audio

• Transmission Distance up to 12.4 miles over Singlemode Fiber

• Adjustment Free Plug & Play Operation

• 1 Year Warranty

• FCC & RoHS Compliant

INCLUDES

• 2 12VDC/2A Power Supplies-

• 4 12 Inch Phoenix 5 Pin Break Out Adapters to 2 XLR Female Neutrik - -

Connectors

• 4 12 Inch Phoenix 5 Pin Break Out Adapters to 2 XLR Male Neutrik - -

Connectors

• 1 Meter 9u/125u Single Mode Fiber Optic Patch Cable-

Set Up Instructions

1. Secure the units in a safe location, where they will not be subject to impact and where there is room around the

unit so nothing will interfere with the fiber optic cabling causing it to bend sharply in a tight radius in any way that

can severely affect the signal transfer.

2. Use proper cable management and handling for routing fiber optic cable.

3. Carefully connect your source(s) to the transmitter input(s) and the receiver unit output(s) to your receiving device

input(s) using the XLR connectors on the transmitter and on the receiver unit.

4. CLEAN* the ST fiber optical cable contacts that will be used for connecting the Tx and Rx units and attach the fiber

cable to the ST connections and secure, as you would secure a bayonet BNC. While pressing lightly in on the

connector, twist it in a clockwise direction about 1/8 to 1/4 of a turn and then release. The connector should stay

inserted and have backwards spring pressure holding the bayonet in place.

5. Connect the included power supplies to the transmitter and receiver units, and plug them both into an AC power

source (100 240VAC 50/60Hz).-

* CLEAN: All fiber optical cable contacts require cleaning each time before inserting into a device s outputs or ’

inputs. Failure to clean the contacts can damage the unit s optics over time and can also permanently damage ’

the cable and the device.

Use cleaning kits designed specifically for fiber optics.

SES- -X FA8LTT01 AUDIO FIBER EXTENDER

SPECIFICATIONS

Unity Gain 0dB

Total Harmonic Distortion

<0.05%

Signal to Noise Ratio

> 90dB Ref. 4dBu, A Weighting

Maximum Balanced Input Signal 18dBu

Max Line Input/Output Voltage 17.4Vp -p

Opcal Wavelength 1310nm

Frequency Response 20Hz— KHz 20

Sample Rate 48KHz, 24K bit rate

Input Power 12VDC

Unit Dimensions Each Unit

6.25 x 6.25 x 1.25 inch with anges/plugs

Power Consumption <1W

Includes (2) 12VDC/2A Power Adapters

Produkt Specifikationer

Mærke:	Sescom
Kategori:	AV forlænger
Model:	SES-X-FA8LTT01

Har du brug for hjælp?

Hvis du har brug for hjælp til Sescom SES-X-FA8LTT01 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

AV forlænger Sescom Manualer

Sescom SES-X-FA8LTT01 Manual

23 December 2024

AV forlænger Manualer

Nyeste AV forlænger Manualer

Kramer 690R Manual

1 August 2025

Tripp Lite B132-100-1 Manual

31 Juli 2025

Tripp Lite B126-1A1SR Manual

31 Juli 2025

Tripp Lite B127U-002-PDPD2 Manual

31 Juli 2025

Tripp Lite B140-004 Manual

31 Juli 2025

Tripp Lite B127U-002-PHPH2 Manual

31 Juli 2025

Tripp Lite B126-2A0 Manual

31 Juli 2025

Tripp Lite B126-1A1-PLHD Manual

31 Juli 2025

Tripp Lite B013-330 Manual

31 Juli 2025

Tripp Lite B127U-111-PHPH Manual

30 Juli 2025