Shark S6005UK Manual

Shark Damprenser S6005UK

Læs gratis den danske manual til Shark S6005UK (2 sider) i kategorien Damprenser. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Shark S6005UK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

(Click)

Please be sure to read the enclosed Shark® instructions prior to using your unit.

ASSEMBLY

Steam Mop Handle

Steam Mop Body

Removable Handheld

Steamer

Intelli-Mop™ Head

Dirt Grip™ Pad (x2)

Filling Flask

Accessory Hose

Garment Steamer

(Certain Models Only)

Small Above-Floor

Pocket Tool and Pad

(Certain Models Only)

Steam Blast Scrubbing

(Certain Models Only)

K Copper Brush

(Certain Models Only)

Nylon Brush

(Certain Models Only)

M Carpet Glider

(Certain Models Only)

N Steam Crevice tool

(Certain Models Only)

WHAT’S INSIDE

FILLING THE WATER TANK

REMOVING THE PAD

1 Open the water tank cap.

2 Use the ﬁlling ﬂask to pour

water into the tank. Do not

overﬁll. Replace the cap on the

water tank.

S6005UK_QSG _MP_191213_Mv1

1 Screw the mop handle into the Steam Mop body

(screwdriver not included).

2 Slide the Intelli-Mop™ Head connector into the

Steam Mop body. Push until you hear it click

securely into place.

KLIK N’ FLIP® MOP HEAD TECHNOLOGY

Lift the mop straight

up by the handle

until the Mop Head

is hanging straight

down. Press the pad

release button, and

both sides of the head

will drop open,

releasing the pad.

CAUTION: It is recommended that you allow the

pads to cool o before removing them from the

moph ead or accessories to avoid possible

scalding injury.

1 Lift the mop straight

up by the handle

until the Mop Head

is hanging straight

down. Center the

Mop Head above the

pad. Press the release

button on the back

of the mop body, and

both sides

of the mop head will

drop open.

2 Slip the mop head’s

4 corner tabs into

the 4 corner

pockets of the

Dirt Grip™ Pad.

3 Gently press the Mop

Head to the ﬂoor on

one side of the pad,

and that side will click

into place.

4 Flip the other side

of the head over

onto the ﬂoor to

click into place.

QUICK START GUIDE

FLOOR AND HANDHELD STEAM CLEANER

(Flath ead

screwdriver

required -

not included)

When you need an extra burst of steam to clean

tough, dried messes and stuck-on stains, use the

Steam Blaster.

1 Flip the Mop Head over so that it is behind the

mop body.

2 Tilt the mop handle back. This will cause the Steam

Blaster to emit a concentrated blast of steam onto

the ﬂoor.

3 To stop the Steam Blaster™ spray, simply tilt the

mop handle forward.

4 Flip the Mop Head back into its original position and

continue cleaning.

STEAM BLASTER™ TECHNOLOGY

1 Plug the power cord into

electrical socket. The STEAM

CONTROL button will ﬂash blue.

2 Press the STEAM CONTROL

button to select your steam

setting: once for , twice for LO HI, and three

times to place the unit in STANDBY MODE.

SETTING IDEAL FOR

THESE

SEALED

SURFACES

RECOMMENDED USAGE

La minate

Hardwood

Marble

Light cleaning and dusting

Loosening and lifting light dirt.

Hardwood

Marble

Tile

Stone

Cleaning most sealed surfaces and

large areas. Basic everyday cleaning.

Removing spots and smaller messes.

Cleaning moderate and heavy-

trac areas.

Hardwood

Marble

Tile

Stone

Deep cleaning and cleaning hard-

to-clean surfaces. Tough cleaning

and removing stuck-on messes and

stains. Deep cleaning heavy-trac

areas. Cutting through heavy dirt

and grime .

INTELLIGENT STEAM CONTROL®

CLEANING

ABOVE-FLOOR CLEANING

ABOVE-FLOOR CLEANING ACCESSORIES

Remove the Handheld Steamer by pressing the release

button and removing it from the cradle.

Snap the desired accessory into the main nozzle of

the Handheld Steamer. Squeeze the steam trigger

to activate steam.

(Note: Tools mode is only available when using the

Handheld Steamer. When the Handheld Steamer is

removed from the cradle, it will automatically go

into Tools mode.)

Once ﬁnished with handheld steaming, press the

STEAM CONTROL button until the light ﬂashes

blue to put the unit in STANDBY MODE. Leave to

cool down for 2 to 3 minutes before removing mop

head, pads, or handheld accessories and storing.

ACCESSORIES USE HOW TO ATTACH

G ACCESSORY HOSE

For spot cleaning and direct

steaming. Slide Accessory H ose onto the Handheld Steamer.

SMALL ABOVE

FLOOR POCKET

TOOL AND PAD

(CERTAIN MODELS

ONLY)

Ideal for small, uneven surfaces.

The pointed tip is great for edges

and corners.

Slide the pad onto the Small Above-Floor Pocket Tool so it ﬁts

snugly.

Attach the elastic band and slide the locking toggle to tighten.

Connect the tool to the Accessory Hose by pushing ﬁrmly until it

clicks

into place, then attach the Accessory Hose onto the Handheld Steamer.

For questions or to register your product, contact us at: 0800 862 0453 or visit us online at sharkclean.eu

@sharkcleaninguk @sharkcleanuk @sharkcleanuk

Tools

Produkt Specifikationer

Mærke:	Shark
Kategori:	Damprenser
Model:	S6005UK
Type:	Bærbar damprenser
Bredde:	340 mm
Dybde:	220 mm
Højde:	1180 mm
Vægt:	2800 g
Produktfarve:	Grey, White
Strøm:	1050 W
Ledningslængde:	8 m
Rengøring af overflader:	Hårdt gulv
Kapacitet:	0.5 L
Damptryk:	- bar
Aftagelig transportabel damprenser:	Ja