Sharp RK56S27 Manual

Sharp TV signal forstærker RK56S27

Læs gratis den danske manual til Sharp RK56S27 (4 sider) i kategorien TV signal forstærker. Denne vejledning er vurderet som hjælpsom af 67 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 34 anmeldelser. Har du et spørgsmål om Sharp RK56S27, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
For Sharp Carousel® Built-in Kit
Models RK56S27 or RK56S30
S = STAINLESS
THIS KIT IS UL APPROVED TO ALLOW CERTAIN MICROWAVE
OVENS TO BE INSTALLED ABOVE ANY ELECTRIC WALL OVEN.
PLEASE SEE THE OPERATION MANUAL REGARDING APPROVED
BUILT-IN APPLICATIONS.
IMPORTANT:
This Built-in Kit is designed for and approved only for those
Sharp Microwave Ovens specifying Built-In Kit RK56S27 or
RK56S30. Refer to instruction manual for approved models.
PLEASE READ THESE INSTRUCTIONS
THOROUGHLY
BEFORE BEGINNING INSTALLATION!
• Be sure to DISCONNECT THE PLUG of the microwave
oven from the electrical outlet before installing the Built-in
Kit. Remove the Carousel turntable from the oven cavity.
• Because the kit includes metal parts, due caution should
be used in handling and installation to avoid the possibil-
ity of injury.
ITEM PART NAME QTY
A FRONT FRAME
RK56S27: FDECAB252MRK0
RK56S30: FDECAB253MRK0
1
B BACK FRAME
RK56S27: FDECAB255MRK0
RK56S30: FDECAB255MRK0
1
C EXHAUST DUCT ASSEMBLY
PDUC-B188MRP0
1
D SCREW D: XTSS740P20000 2
E SCREW E: XOPS740P16000 4
1
INSTALLATION INSTRUCTIONS
A B
D
C
E
V-cut
indicates
center of
duct
CL
2
The opening in the wall or cabinet must be within the
following dimensions:
Cut Out RK56S27 & RK56S30
Height (A) 16
1/4"
Width (B) 261/8" to 26
3/8"
Minimum Depth (C) 20"
Outlet should be in the shaded area as indicated on NOT
Sketch 1.
A
B
4"
C
4"
SKETCH 1
NOTES
• Please allow minimum 3" wood gap between the
microwave oven cutout and the appliance cutout below
the microwave oven. See Sketch 2
3" Min.
Microwave cutout
Wall oven cutout
SKETCH 2
• If the dimension of DEPTH (C) is more than 21", the outlet
location may be any area on the rear wall.
• The oor of the opening should be constructed of plywood
strong enough to support the weight of the oven and oor
load (about 100 pounds). The oor should be level and
90˚ with the face of the cabinet for proper installation and
operation of the oven. Be sure to check the local building
code as it may require that the opening be enclosed with
sides, ceiling and rear partition. The proper functioning of
the oven does not require the enclosure.
STEP 1 CABINET OR WALL OPENING

Produkt Specifikationer

Mærke: Sharp
Kategori: TV signal forstærker
Model: RK56S27

Har du brug for hjælp?

Hvis du har brug for hjælp til Sharp RK56S27 stil et spørgsmål nedenfor, og andre brugere vil svare dig


TV signal forstærker Sharp Manualer

Sharp

Sharp RK56S27 Manual

20 Februar 2024

TV signal forstærker Manualer

Nyeste TV signal forstærker Manualer

Astro

Astro HVO V40 P Manual

12 Februar 2025
Hirschmann

Hirschmann GHV 41 M Manual

4 December 2024
Hama

Hama 39122497 Manual

8 Oktober 2024
Goobay

Goobay SAT Modulator HF-2 Manual

28 Juni 2024
Steren

Steren CA50/550 Manual

5 Juni 2024
Steren

Steren CA-30/550 Manual

5 Juni 2024
Steren

Steren CA-30/1000 Manual

5 Juni 2024
Wilson

Wilson weBoost Drive 4G-X OTR Manual

31 Maj 2024
Wilson

Wilson weBoost Home MultiRoom Manual

31 Maj 2024
Wilson

Wilson weBoost Home Complete Manual

31 Maj 2024