Silva Schneider Exceed 2X Manual

Silva Schneider Lommelygte Exceed 2X

Læs gratis den danske manual til Silva Schneider Exceed 2X (2 sider) i kategorien Lommelygte. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Silva Schneider Exceed 2X, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Visit: www.silva/enviroment

for more information about the

Waste Electrical and Electronic

Equipment (WEEE) Directive.

SILVA EXCEED 2 AND FLOW LIGHT

Thank you for choosing Silva Exceed 2 headlamp. This headlamp can, thanks to the modular

design, also be used on a helmet or a bike handle bar.

Exceed 2 is equipped with Flow Light which is a light distribution technology that combines

a wide-angle flood light with a long reach spot light. If you aim the light beam of the Exceed 2

close to your feet by rotating the light body downward, the light image will be a wide flood light

adapted for slower activities. If you aim the light higher up, further away, the light image will

gradually transform into a long-distance spot beam, perfect for higher speed.

This unique feature gives the user peripheral or long distance vision depending on the activ-

ity or speed. For a runner, cross country skier, mountain biker or night orienteer this translates

into less head movement, increased control, better balance and more speed

PRODUCT OVERVIEW

The Exceed 2 packaging contains the following parts:

• Headlamp unit

• Ergonomic head set.

• Rechargeable Li-ion battery (Exceed 2X & 2XT only)

• Extension cord

• Helmet attachment

• Bike handle bar attachment

• Quick guide

• Storing case

• USB charging cable (Exceed 2X &Exceed 2XT only)

• USB charger (Exceed 2XT only)

BEFORE USE

BATTERY CHARGING (EXCEED 2X & EXCEED 2XT)

The battery needs to be charged before first use.

1. Connect the battery to the charger or other USB port with the included cable.

2. Connect the charger to the wall outlet.

3. On the battery, there are 5 LEDs showing battery status during charging:

• Green light (all 5 LEDs) = battery is fully charged

• Red light blinking = battery is charging

Note! When the battery is fully charged the charger automatically switches to maintenance

mode.

Exceed 2 is compatible with all Silva batteries with the same connector as on Exceed 2 battery.

Note that the battery indication may not be accurate with other Silva batteries.

SILVA EXCEED 2 – THE FLEXIBLE, MODULAR HEADLAMP

Exceed 2 is designed for Multi-activity Sports. Here is a description of the different options:

ERGONOMIC HEADSET

The head set is ergonomically shaped to give comfortable fit. Use the 2 buckle adjustments to

fit it perfectly to your head. Removable top band included.

Attach the headlamp in the head bracket by sliding the headlamp foot into the snap-in socket.

To remove, slide the headlamp up and out of the bracket.

BIKE HANDLEBAR ATTACHMENT

The bike handle bar attachment is developed for use on bike handlebars with a dimension

between 22 mm and 32 mm. The bike bracket is attached to the handle bar by wrapping the

rubber strap around the handlebar and fasten it on the plastic hook.

Attach the headlamp in the bike handle bar attachment by sliding the headlamp bracket into

the snap-in socket.

To remove, slide the headlamp up and out of the bracket.

HELMET ATTACHMENT

The helmet attachment comes with pre-mounted adhesive tape on the back for easy mounting

on any helmet.

To mount the helmet attachment, remove the protective film covering the adhesive tape.

Make sure the surface of the helmet is clean and dry. Press the bracket onto its correct posi-

tion.

If you do not want to use the adhesive on your helmet the attachment is prepared for mount-

ing with 2 or more straps on the sides. (Not included)

Attach the headlamp in the helmet attachment by sliding the headlamp bracket into the

snap-in socket.

To remove, slide the headlamp up and out of the bracket.

FLEXIBLE BATTERY CARRYING

The Exceed 2 headlamp is designed so that the battery can be carried in multiple ways. For

example, in a battery carrier on your back, on the bike frame, on your belt, backpack or on the

back of your head unit etc.

DURING USE

SWITCH ON YOUR HEADLAMP

A push button is located on the left side of the headlamp body. This button controls all light modes.

• To start the headlamp with Flow Light activated press push button with a short press.

• To start the headlamp with Flow Light de-activated press and hold push button for 1 second

• To cycle between the different modes use short presses.

• To turn the headlamp off press and hold button for 1 second

MAX

SHORT PRESS LONG PRESS

OFF

OFF OFF OFF

MED MIN BLINK

FLOW LIGHT ACTIVATED

FLOW LIGHT DEACTIVATED

BOOST MODE

Exceed 2 has a Boost mode that temporarily increases the light output to 2000 lumens during

10 seconds.

To enter Boost mode, do as follows:

• Turn headlamp ON (with Flow light activated or de-activated)

• Keep push button pressed until headlamp turns OFF and keep pressing the push button

until the headlamp turns back ON.

• Headlamp has now entered Boost mode

• The light will remain in Boost mode for 10 seconds and then return to the light mode from

where you entered Boost mode (for example MED)

Note! During the 10 seconds the headlamp is in Boost mode it is not possible to use push button.

TEMPERATURE CONTROL

Note that the headlamp body temperature will increase during use. The headlamp tempera-

ture is depending on light mode, ambient air temperature and the airflow (speed). Exceed 2 is

equipped with a temperature control unit that prevents the headlamp body from overheating by

reducing the power to the LEDs.

Note! Always make sure to disconnect the battery when the headlamp is stored in a closed

compartment such as in a bag, pocket or similar.

LOW BATTERY WARNING

During operation of the headlamp there will be a low battery warning when 25% of the battery

time remains. This is done by flashing LEDs for 1 second 2 times with 5 second interval.

When 15% remains the LEDs will flash 1 time.

RESERVE MODE

During operation, the lamp will go into reserve mode when there is 15% power left of the bat-

tery. All LEDs will flash once before the lamp goes into this mode.

Reserve mode can be overridden by pressing the button.

Warning: If you have pressed the button when headlamp is in reserve mode no more low bat-

tery warnings will appear before the headlamp turns OFF.

BATTERY STATUS INDICATION (EXCEED 2X & EXCEED 2XT)

On the battery, there is a push button that activates battery indication LEDs. When pushing the

button 5 LEDs on the battery shows battery status according the following…

• 5 green LEDs = Fully charged

• 4 greed LEDs = 80% of the battery remains

• 3 greed LEDs = 60% of the battery remains

• 2 greed LEDs = 40% of the battery remains

• 1 red LED = 20% of the battery remains

FULL VERSION MANUAL

EXCEED 2

EXCEED 2X: Art.no 37634

EXCEED 2XT: Art.no 37635

LIMITLESS EXCEED 2: Art.no 37636

EXCEED 2X EXCEED 2XT / LIMITLESS EXCEED 2

Visit: www.silva/enviroment

for more information about the

Waste Electrical and Electronic

Equipment (WEEE) Directive.

AFTER USE

MAINTENANCE

To make sure you get maximum performance from your Exceed 2 headlamp, clean it regularly

with a damp cloth. Head set cleaning – rinse in warm water.

TECHNICAL SPECIFICATIONS: EXCEED 2XT

Weight headlamp including headset: 149g

Battery weight: 355g

Battery type: Li-ion 7.4V, 9.9Ah

Light distance Max/Med/Min: 175/100/40

Lumen Boost/Max/Med/Min: 2000/1500/600/80

Burn time 20˚C Max/Med/Min/Blink: 12h/18h/60h/100h

Burn time -5˚C Max/Med/Min/Blink: 4h/9h/60h/100h

Reserve mode: 1h

Charging time: 10h

Water resistance: IPX5

Operative temperature range: -20 - +60º

TECHNICAL SPECIFICATIONS: EXCEED 2X

Weight headlamp including headset: 149g

Battery weight: 157g

Battery type: Li-ion 7.4V, 3.3Ah

Light distance Max/Med/Min: 175/100/40

Lumen Boost/Max/Med/Min: 2000/1500/600/80

Burn time 20˚C Max/Med/Min/Blink: 4h/6h/20h/40h

Burn time -5˚C Max/Med/Min/Blink: 1.5h/3h/20h/40h

Reserve mode: 1h

Charging time: 10h

Water resistance: IPX5

Operative temperature range: -20 - +60º

TECHNICAL SPECIFICATIONS: LIMITLESS EXCEED 2

Weight headlamp including headset: 149g

Battery weight: -

Battery type: -

Light distance Max/Med/Min: 175/100/40

Lumen Boost/Max/Med/Min: 2000/1500/600/80

Burn time 20˚C Max/Med/Min/Blink: -

Burn time -5˚C Max/Med/Min/Blink: -

Reserve mode: 1h

Charging time: -

Water resistance: IPX5

Operative temperature range: -20 - +60º

ABOUT LI-ION BATTERIES

The battery should be stored in a dry environment within the temperature range of

-20°C and +35°C.

If you would like to store your battery for a longer period (more than 30 days) the battery should

not be fully charged. This may cause loss of its characteristics.

Li-ion batteries have a discharge rate of approx. 20% over a 30-day period. You can always

charge a half full battery without damaging its characteristics.

Do not expose the battery for extreme temperatures which may cause fire or explosion.

Do not disassemble or mistreat the battery; risk for chemical burn.

Keep away from children.

Do not dispose of batteries in fire. This may cause an explosion.

Do not submerge the batteries in water.

Do not short circuit the contacts.

Replace only with Silva batteries with the same connector as on Exceed 2 battery.

PROTECTING THE ENVIRONMENT.

Headlamp, batteries and packaging are recyclable. Please dispose these items at designated

recycling stations.

WARR ANTY

Silva warrants that, for a period of two (2) years, your Silva Product will be substantially free of

defects in materials and workmanship under normal use. Silva’s liability under this warranty is

limited to repairing or replacing the product. This limited warranty extends only to the original

purchaser.

If the Product proves defective during the Warranty Period, please contact the original place

of purchase. Make sure to have your proof of purchase on hand when returning the product.

Returns cannot be processed without the original proof of purchase. This warranty does not

apply if the Product has been altered, not been installed, operated, repaired, or maintained in

accordance with instructions supplied by Silva, or has been subjected to abnormal physical

or electrical stress, misuse, negligence or accident. Neither does the warranty cover normal

wear and tear. Silva is not responsible for any consequences, direct or indirect, or damage

resultant from use of this product. In no event, will Silva’s liability exceed the amount paid by

you for the product. Some jurisdictions do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or exclusion may not apply to you. This War-

ranty is valid and may be processed only in the country of purchase.

For more information please visit www.silva.se

FULL VERSION MANUAL

EXCEED 2

EXCEED 2X: Art.no 37634

EXCEED 2XT: Art.no 37635

LIMITLESS EXCEED 2: Art.no 37636

EXCEED 2X EXCEED 2XT / LIMITLESS EXCEED 2

Produkt Specifikationer

Mærke:	Silva Schneider
Kategori:	Lommelygte
Model:	Exceed 2X
Kode for international beskyttelse (IP):	IPX5
Antal effektniveauer:	3
Vægt:	149 g
Antal pr. pakke:	1 stk
Brugervejledning:	Ja
Produktfarve:	Sort
Batterispænding:	7.4 V
Batterikapacitet:	3300 mAh
Lampe type:	LED
Batteriteknologi:	Lithium-Ion (Li-Ion)
Husmateriale:	Acrylonitrile butadiene styrene (ABS), Aluminium, Thermoplastic urethane (TPU)
Vandfast:	Ja
Indikator for batteriniveau:	Ja
Kabler inkluderet:	USB
Pakketype:	Kasse
Batterier inkluderet:	Ja
Batterilevetid (maks.):	20 t
Batteritype:	Indbygget
Antal understøttede batterier:	1
Antal lamper:	3 Lampe( r)
Opladningstid for batteri:	4 t
Numre af batterier medfølger:	1 stk
Opladningskilde:	USB
Lommelygte type:	Hovedbånd lommelygte
Lysstråle afstand (maks.):	175 m
Lys output (maks.):	2000 lm
USB oplader inkluderet:	Ja
Antal lystilstande:	4
Lys output (min.):	80 lm
Lysstråle afstand (min.):	40 m