Skytec SPL500EQ Manual

Skytec Modtager SPL500EQ

Læs gratis den danske manual til Skytec SPL500EQ (10 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Skytec SPL500EQ, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/10
STEREO POWER AMPLIFIER WITH EQ
SPL5 00EQ
SPL700EQ
SPL1000EQ
SPL1500EQ
SPL2000EQ
Instruction Manual
Gebruiksaanwijzing
Mode d’Emploi
Gebrauchsanleitung
Manual de instrucciones
SPL–EQ SERIES - 3 -
UK
Congratulations to the purchase of our SPL Amplier.
Read the instructions thoroughly prior to using the unit.
SAFETY INSTRUCTIONS
• Hearing damage:
Loudspeakers are easily generating high sound
pressure levels (SPL) sucient to cause permanent
hearing damage to performers, production crew and
audience members. Care should be taken to avoid
prolonged exposure to SPL in excess of 85 dB.
• Make sure that the amplier is switched o when the
speaker box is connected or disconnected.
• Do not overload the amplier or speakers to avoid
damage to the components.
• Do not plug or unplug the unit with wet hands.
• If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
• Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
• During a thunderstorm or if the unit will not be used for
a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
• If the unit has not been used for a longer period of
time, condensation may occur. Let the unit reach
room temperature before you switch it on. Never use
the unit in humid rooms or outdoors.
• During operation, the housing becomes very hot. Do
not touch it during operation and immediately after.
• Do not use cleaning sprays to clean the switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice
from a specialist.
• Do not force the controls.
• Do not place an open re (candle, etc.) on top or next
to the box - FIRE HAZARD
• Make sure that the amplier is placed on a stable,
solid surface.
• Do not place liquids on the amplier and protect it
against humidity. Humidity can shorten the life time
considerably.
• If the unit is damaged to an extent that internal
parts are visible, DO NOT connect the unit and DO
NOT switch it on. Contact your dealer.
• Never try to repair the unit yourself. It does not
contain any user serviceable parts. All repairs must
be carried out by a qualied technician.
• Set the amplier to the lowest volume prior to
switching it on.
• Keep the unit out of the reach of children.
• Switch the unit o prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the unit.
• Make sure that the mains lead cannot be damaged
when people walk on it. Check the mains lead
before every use for damages and faults!
Protect your environment. Recycle packing
material whenever possible.
Do not throw a faulty unit into normal household
waste but bring it to a special collection
point. A large part of it can be recycled.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit.
This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by
inappropriate use or disrespect of the warnings contained in this manual. SkyTronic cannot be held responsible for
personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all
damages in whatever form.
CONNECTIONS
First of all, check the specications of the amplier if it is suitable for your speaker boxes. Pay particular attention
to the power rating and impedance. Check if the amplier is switched o. If yes, you can switch on the speakers.
PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must be connected to the same sign of every
side i.e. the + of the amplier must be connected to the + of the speaker box. If the connections are inverted, the
sound quality will diminish. Only use high quality speaker cables that are suitable for the power and distance
between the amplier and the speaker.
LAYOUT:
Front Panel
1. Power switch
2. Power on/o indicator
3. han C nel A & B volume
control
4. Signal LED Channel A & B
5. Clip indicator
6. 3-Bands EQ
7. Input selector
8. MP3 Input

Produkt Specifikationer

Mærke: Skytec
Kategori: Modtager
Model: SPL500EQ

Har du brug for hjælp?

Hvis du har brug for hjælp til Skytec SPL500EQ stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Skytec Manualer

Skytec

Skytec SPL500EQ Manual

17 August 2024
Skytec

Skytec SPL-700 Manual

17 August 2024
Skytec

Skytec SPL-1500EQ Manual

15 August 2024
Skytec

Skytec SPL400 Manual

13 August 2024
Skytec

Skytec SPL-300MP3 Manual

12 August 2024
Skytec

Skytec SPL700 Manual

12 August 2024
Skytec

Skytec LED Manual

12 August 2024
Skytec

Skytec SPL1000 Manual

11 August 2024
Skytec

Skytec SPL-2000EQ Manual

11 August 2024
Skytec

Skytec PRO-240 Manual

11 August 2024

Modtager Manualer

Nyeste Modtager Manualer

MuxLab

MuxLab 500553 Manual

15 September 2025
Atlona

Atlona AT-HDR-CAT-4ED Manual

15 September 2025
Ibiza Sound

Ibiza Sound SA2000 Manual

15 September 2025
Sony

Sony HCD-SH2000 Manual

15 September 2025
AMX

AMX NMX-ENC-N2612S Manual

14 September 2025
AMX

AMX UDM-RX02N Manual

14 September 2025
AMX

AMX AVB-RX-DXLINK-HDMI Manual

14 September 2025
Perreaux

Perreaux Silhouette SXH2 Manual

13 September 2025
Perreaux

Perreaux Silhouette SXP2 Manual

13 September 2025
Perreaux

Perreaux Silhouette SX25i Manual

12 September 2025