Sonance Visual Performance VP65 SST Manual

Sonance Højttaler Visual Performance VP65 SST

Læs gratis den danske manual til Sonance Visual Performance VP65 SST (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Sonance Visual Performance VP65 SST, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Introduction

Thank you for purchasing Sonance Visual Performance ®

Single-Stereo Technology®(SST) or surround (SUR) speakers.

When properly installed your new speakers will give you years

of entertainment pleasure.

Box Contents

IIt

tte

eem

mm Quantity (SST)

Quantity (SST)

Quantity (SST)Quantity (SST) Quantity (SUR)

Quantity (SUR)

Quantity (SUR)Quantity (SUR)

Visual Performance Speaker 1 2

Paintable Grille 1 2

Plastic Paint Plug 1 2

Mounting Cutout Template 1 1

Speaker Placement

SST Models

Because a single SST speaker reproduces both stereo channels

from a single location, it will deliver outstanding performance

from a wide variety of mounting locations where a pair of stereo

speakers would be impractical, including hallways, bathrooms

and closets.

The table below shows how far apart SST speakers can be

spaced in distributed audio applications while still providing

good coverage for standing and seated listeners (see

Figure 1

Ceiling Height

Ceiling HeightCeiling Height S

SSpacing (Standing)

pacing (Standing)

pacing (Standing)pacing (Standing) Spacing (Seated)

Spacing (Seated)

Spacing (Seated)Spacing (Seated)

9-Foot Ceiling 5’7” (1.7m) 9’5” (2.9m)

10-Foot Ceiling 9’7” (3.0m) 13’5” (4.1m)

12-Foot Ceiling 13’7” (4.2m) 17’5” (5.3m)

14-Foot Ceiling 17.7’ (5.4m) 21’5” (6.6m)

SUR Models:

5.1-Channel Home Theater System

Mount the left and right surround speakers on the ceiling 2 – 6

feet (0.6m – 1.8m) behind the listening position. The speakers

should be 6 – 10 feet (1.8m – 3m) apart. Orient the speakers so

the tweeters face the front and rear walls of the room. Use

Figure

as a guide.

SUR Models:

7.1-Channel Home Theater System

Mount the left and right surround speakers directly to the sides of

the listening position, 6 – 10 feet (1.8m – 3m) apart. Mount the

surround back speakers 2 – 6 feet (0.6m – 1.8m) behind the

listening position. The surround back speakers should be closer

together than the left and right surround speakers, 3 – 6 feet

(0.9m – 1.8m) apart. Use

Figure 3

as a guide.

3' – 6'

(0.9m – 1.8m)

apart

2' – 6'

(0.6m – 1.8m)

Surround

Back

Speaker

Surround

Back

Speaker

Right Surround

Speaker

Left Surround

Speaker

F P 7.1-C SIGURE 3: SUR SPEAKER LACEMENT IN A HANNEL YSTEM

I N S T R U C T I O N M A N U A L

V I S U A L P E R F O R M A N C E ® S E R I E S

S S T A N D S U R S P E A K E R S

6' – 10'

(1.8m – 3m)

apart

2' – 6'

(0.6m – 1.8m)

Right Surround

Speaker

Left Surround

Speaker

F P 5.1-C SIGURE 2: SUR SPEAKER LACEMENT IN A HANNEL YSTEM

OVERAGE

REA

OVERAGE

REA

PEAKER

PACING

F A S SIGURE 1: DISTRIBUTED UDIO PEAKER PACING

S W :AFETY ARNING

THESE SPEAKERS HAVE AST OUNTF M ®TABS THAT PREVENT THE

SPEAKER FROM FALLING OUT OF THE MOUNTING HOLE DURING THE

INSTALLAT ION PROCESS.

T F MH E E DG E S O F T H E A S T O U NT TA B S A R E V E R Y S H A R P.

US E CA U T I ON W H E N HA N D LI N G T H E S P E A KE R .

SONANCE VISUAL PERFORMANCE®SST & SUR

Before Installation: Retrofit

1. Determine the location for the speaker (see

Speaker

Placement

, on page 1).

2. Perform an obstruction survey to be certain that there are no

studs, conduit, pipes, heating ducts, pocket doors or air returns

in the wall or ceiling cavity that will interfere with the speaker.

3. Mounting space require ments:

Mounting space requi rements:

Mounting space requi rements:Mounting space requi rements:

• Larg e round SST & SU R:

Larg e rou nd SST & SU R:

Larg e rou nd SST & SU R:Larg e rou nd SST & SU R: 10 1⁄8" (257mm) diameter

cut-out; 5 7⁄8" (149mm) depth within the mounting cavity.

• Large square SST :

Large squa re SST:

Large squa re SST:Large squa re SST: 10¼" x 10¼" (260mm x 260mm)

cut-out; 5 7⁄8" (149mm) depth within the mounting cavity.

• Medium round SST & SUR:

Medium round SST & SUR:

Medium round SST & SUR:Medium round SST & SUR: 8¼" (210mm) diameter

cut-out; 4¾" (121mm) depth within the mountinig cavity.

• Medium square SST :

Med ium square SST :

Med ium square SST :Medium square SST : 8¼" x 8¼" (210mm x 210mm)

cut-out; 4¾" (121mm) depth within the mounting cavity.

• Medium rectangle SST:

Medium rectangle SST:

Medium rectangle SST: Medium rectangle SST: 6 15⁄16" x 10¾" (176mm x 273mm)

cut-out; 3 9⁄16" (91mm) depth within the mounting cavity.

• Medium Thi nLine round SST :

Med ium T hinLine round SST :

Med ium T hinLine round SST :Med ium T hinLine round SST : 8¼" (210mm) diameter

cut-out; 3 1⁄

32 " (77mm) depth within the mounting cavity.

• Sm a ll r oun d SST :

Sm a ll r ou n d SST :

Sm a ll r ou n d SST :Sm a ll r ou n d SST : 5 7⁄8" (149mm) diameter cut-out;

3½" (89mm) depth within the mounting cavity.

• 5

Small square SST :

Small square SST :Small square SST : 5⁄8" x 5 5⁄8" (143mm x 143mm)

cut-out; 3 5⁄8" (92mm) depth within the mounting cavity.

4. Position the included cut-out template where the speaker is to

be located and pencil an outline on the wall or ceiling. If you

are unsure about obstructions, drill a small hole in the center

of the outline and insert a coat hanger wire into the hole to

feel-around for possible obstructions.

5. Cut the mounting hole using a keyhole or drywall saw, and

run the speaker wires from the mounting hole to the amplifier

location.

NOTE : CO NSU LT LOC AL B U I LD I N G C O D ES B E FO R E R U N N IN G

SP E AK E R WI R ES TH R OU G H CE I LI N GS.

Installation

Visual Performance SST SUR speakers feature exclusiveAND

FastMount tabs and an integral Roto-Lock®mounting system for

quick mounting directly into existing walls and ceilings.

WARNING: The edges of FastMount tabs are very

sharp. Use caution when handling the speaker.

1. Remove the paint plug from the speaker.

2. Run speaker wire from each speaker to the amplifier location.

3. Strip ¼” – ½” (6mm – 12mm) of insulation from each speak-

er lead. Twist the strands or tin the exposed wire with solder

to ensure that there are no stray strands. (Stray strands that

touch each other can cause a short-circuit that can damage

the amplifier.)

4. The speaker’s connector posts are spring-loaded. Push the top

of each connector post down to open the connector and insert

the exposed wires into the holes in the posts.

• The speaker’s positive post is labeled with a red dot; the neg-

ative post is labeled with a black dot. Double-check that you

connected amplifier “+” to speaker “+” and amplifier “–” to

speaker “–”.

5. Make sure all the Roto-

Lock clamps are in the

full clockwise position

so that they are tucked

within the mounting

hole’s border. Insert the

speaker into the hole in

the wall or ceiling

(

Figure 4

). The Roto-

Lock system can accom-

modate a maximum

wall or ceiling material

thickness of 1¼”

(32mm).

The FastMount tabs

will prevent the speak-

er from falling out of

the mounting hole,

allowing the installer

to let go of the speaker

to pick-up tools or

other items (

Figure 5

N FOTE: THE AST OUNTM

TABS ARE DESIGNED FOR

ONE TIME USE ONLY- .

IF THE SPEAKER IS

RE MOVED FROM THE

MOUNTING HOLE THE

FAST OUNT TABS WILLM

DISCONNECT AND

REMAIN INSIDE THE WALL

OR CEILING.

6. Tighten the four screws on the front of the speaker baffle

(

Figure 6

). The Roto-Lock clamps will automatically rotate into

position and begin clamping the speaker. When you notice resist-

ance on the screws the speaker has been clamped successfully.

IMPORTANT: Always use low-torque settings;

NEVER over-tighten.

Roto-Lock Clamps

(retracted)

F S IIGURE 4: INSERT PEAKER NTO

M HOUNTING OLE

Roto-Lock

Screws

Roto-Lock

Screws

F R -LIGURE 6: TIGHTENING THE OTO OCK CREWSS

FastMount Tabs

FIGURE 5: FAST OUNTM TABS

Produkt Specifikationer

Mærke:	Sonance
Kategori:	Højttaler
Model:	Visual Performance VP65 SST

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonance Visual Performance VP65 SST stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Sonance Manualer

Sonance Invisible Series IS10W Manual

3 Marts 2025

Sonance Visual Experience VX86 Manual

26 Februar 2025

Sonance Invisible Series IS10 Manual

26 Februar 2025

Sonance Visual Experience VX86R SST Manual

26 Februar 2025

Sonance Visual Experience VX66R Manual

26 Februar 2025

Sonance MAG8R Manual

13 Januar 2025

Sonance Visual Performance Extreme VPXT8R Manual

8 Januar 2025

Sonance Visual Performance VP38R Manual

8 Januar 2025

Sonance MAG5.1R Manual

8 Januar 2025

Sonance MAG6R Manual

8 Januar 2025

Højttaler Manualer

Nyeste Højttaler Manualer

LENRUE A2 Manual

15 Juni 2025

Sony BRAVIA Theatre Bar 6 Manual

15 Juni 2025

Hecate G1500 SE Manual

15 Juni 2025

Edifier MP330 Manual

15 Juni 2025

Hecate G1500 Manual

14 Juni 2025

XLEADER SoundAngel A8 Manual

14 Juni 2025

RCF DU 31EN Manual

14 Juni 2025

Omnitronic PS-2.5WB Manual

14 Juni 2025

Greadio R-919 Manual

14 Juni 2025

J.W. SPEAKER 8700 Evolution J2 Manual

14 Juni 2025