Sonneman Stix Plus 2790.16 Manual

Sonneman Lys Stix Plus 2790.16

Læs gratis den danske manual til Sonneman Stix Plus 2790.16 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Sonneman Stix Plus 2790.16, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

March 7, 2016

LED Product Information and Warnings

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

• Please read all included assembly instructions and warnings carefully before installation. Contact

Customer Service if you have any questions or concerns. Before installation, please conrm that the xture

is compatible with your supply voltage and dimming system, if present.

• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory

sealed compartments, and avoid touching the LEDs with your hands or any object.

• Although all our xtures are equipped with protective devices, LED xtures are vulnerable to power surges

and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC

systems.

• Do not remove or bypass any LED Driver or Transformer that is provided with the xture, and do not

replace or substitute with another power supply.

• Remote LED Driver or Transformer installation must be done by a licensed electrician and in accordance

with local codes. Remote installations should be in an accessible location, as close to the xture as possible.

• Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple xtures together or

wire them in series.

• All factory-made splices and connections must remain intact. LED circuits are carefully designed and built,

and improper connections may damage the xture.

• The ends of coaxial pendant cords have been precisely stripped and split at the factory and must not be

eld cut. Excess cord or cable should be neatly coiled and reserved in the xture canopy.

• Any mounting hardware is provided for your convenience and should be used with discretion. Always use

the appropriate hardware for the mounting surface.

March 7, 2016

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Stix Plus Series - 4ft. LED Wall Bar, 5ft. LED Wall Bar, 6ft. LED Wall Bar, 8ft. LED Wall Bar

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut o power to the branch circuit conductor.

2. The LED transformer (A) must be installed in a remote and accessible location near the xture in accordance with local

electrical code (Fig. 1). You must use the appropriate wire gauge from the transformer to the xture to limit the voltage drop

to less than 5%. Make appropriate electrical connections using wire nuts:

a. Connect the LED transformer’s live wire (black) to the live supply wire.

b. Connect the LED transformer’s neutral wire (white) to the neutral supply wire.

3. Drill a small hole (B) in the wall behind the xture (C) and pull the low voltage transformer output wires through the wall.

4. Make appropriate electrical connections using wire nuts: Connect one of the xture wires to one of the transformer output

wires. Connect the other xture wire to the second transformer output wire. Carefully push connections and extra wires

back through the hole (B) in the wall.

5. Remove diuser (D) from xture (C). Attach the xture to the wall with anchors (E) and screws (F) through the holes in the

xture. Snap the diuser back into the xture.

6. Restore power to the branch circuit conductor.

Note

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

2790, 2791, 2792, 2794

Fig. 1

Produkt Specifikationer

Mærke:	Sonneman
Kategori:	Lys
Model:	Stix Plus 2790.16

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonneman Stix Plus 2790.16 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys Sonneman Manualer

Sonneman Offset 2759 Manual

5 Juli 2025

Sonneman Lithe 3468 Manual

4 April 2025

Sonneman Chimes 2046 Manual

2 April 2025

Sonneman Lithe 3456 Manual

2 April 2025

Sonneman Suspenders SLS0163 Manual

13 November 2024

Sonneman Suspenders SLS0157 Manual

13 November 2024

Sonneman Stix Plus 2790.16 Manual

17 September 2024

Sonneman Stix 2772.16 Manual

11 September 2024

Lys Manualer

Nyeste Lys Manualer

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

BeamZ Cobra 100H Manual

3 Oktober 2025

BeamZ IGNITE 300 Manual

2 Oktober 2025

BeamZ BAC550Z Manual

2 Oktober 2025

BeamZ SB420IP Manual

2 Oktober 2025

BeamZ Mimas Laser Manual

2 Oktober 2025

BeamZ Phantom 2000 Manual

2 Oktober 2025