October 23, 2017
©2017 SONNEMAN - A Way of Light 1 of 15
Suspenders Product Information and Warnings®
Important
• Always disconnect the power before installing or replacing Luminaires and before cleaning or
other maintenance.
• Consult a quali ed, licensed electrician to ensure correct branch circuit conductor.
• Please read all included assembly instructions and warnings carefully before installation. Contact Customer
Service if you have any questions or concerns. Before installation, please con rm that the xture is compatible
with your supply voltage and dimming system, if present.
• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory sealed
compartments, and avoid touching the LEDs with your hands or any object.
• Although all our xtures are equipped with protective devices, LED electronic systems are vulnerable to power
surges and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC
systems.
• Do not remove or bypass any LED Driver or Transformer that is provided with the xture, and do not replace or
substitute with another power supply.
• Remote Transformer installation must be done by a licensed electrician and in accordance with local building
and electrical codes. Remote installations should be in an accessible location, as close to the xture as possible.
The appropriate wire gauge must be used to limit the voltage drop to no more than 5%.
• Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple xtures together or wire
them in series.
• All factory-made splices and connections must remain intact. LED circuits are carefully designed and built, and
improper connections may damage the xture.
• Any mounting hardware is provided for your convenience and should be used with discretion. Always use the
appropriate hardware for the mounting surface.
• Suspenders® transformers can be loaded up to 80% of their rated wattage.
• Suspenders® transformers feature short-circuit protection with automatic recovery, and will resume operation
once the short-circuit condition is removed.
• Suspenders® transformers have 24VAC output
• Suspenders® must be installed in dry locations ONLY.
