Statron 5359.3 Manual

Statron Ikke kategoriseret 5359.3

Læs gratis den danske manual til Statron 5359.3 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Statron 5359.3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

power supply type 5359.3

read the instruction book careful before first use of the power supply. With harms, the through non-observance

this instruction accrue, extinguishing the claim under guarantee plus cubit liability of the manufacturer from the

follow the non-observance.

1. Bestimmungsgemäßer Gebrauch

this appliance is for the operational in closed rooms . It's at a safe fixedplace plus a sufficient ventilation to

observe (ventilating louvres non- uncover!).

The appliance serves the provision a AC voltage or a d.c. voltage switchable of 2 V to 14 V/max.5A.

2. Safety notes

2,1 the power supply unit is in safety class system I as well as in accordance with VDE 0411 and VDE 0805

(EN60950) structured. The supply transformer is structured and with 3,75 kVeff is primarysecondarily

checked according to DIN VDE 0551 as safety insulating transformer. It is radio-screened in accordance with

VDE 0875T11 curve B. Es is equipped with a VDE checked main with protective grounding and may

therefore only to 230-V-AC input voltage with protective grounding be operated or attached.

2,2 it is to be made certain that protective grounding (yellow/green) is interrupted neither in the main nor in the

device or in the network, since with interrupted protective grounding mortal danger exists. It is to be made

certain further that the isolation is damaged nor destroyed neither.

2,3 power supply units do not belong into child hands!

2,4 in commercial mechanisms is to be considered the rules for the prevention of accidents of the federation of

the commercial professional association for electrical system and resources.

2,5 in schools, training facilities, hobby and self-help workshops. is by hand possible for

2,6 when opening covers or removing from sections, except if this, can live sections be opened. Also interface

can be live. Before an alignment, maintenance, a repair or an exchange of sections the device must be

separate from all voltage supplies, if opening of the device is necessary. If thereafter an alignment,

maintenance or a repair at the opened device under voltage are inevitable, may take place only by means of

a specialist, who is familiar with the associated dangers or the relevant regulations for it.

2,7 condensers in the device can be still loaded, even if the device were separated from all voltage supplies.

2,8 it is to be guaranteed that only protections of the indicated type and the indicated call stromstraerke are used

as back-up. The use of repaired protections or bridging the fuse holder is illegal. The device is overload-proof

and short-circuit-protected. When burning the input protection through a serious error is therefore present,

which must be eliminated by a specialist, before the new intact protection can be used by this specialist.

2,9 switching it your power supply unit never equivalent if it is brought by a cold into a warm space. The

condensation developing thereby can destroy your device under unfavorable circumstances. Let the device

unein switched to room temperature come. carrying of metallic or conductive decoration is forbidden to

2,10 with work with power supply units such as chains, bracelets, rings or the like.

2,11 power supply units are not certified for application at humans or animals.

2,12 during the series connection of the outputs one or several power supply units is produced lethal voltages (>35

VDC).

2,13 louvers of power supply units may not be taken off! The devices are on hard to place with difficulty

inflammable documents so that air can occur the devices unhindered. The cooling of the devices takes place

predominantly via convection.

2,14 power supply units and the attached consumers may not be operated unsupervised. Measures are to be

taken to the protection and the protection of the attached consumers in relation to effects of the power supply

units (e.g. overvoltages, failure of the power supply unit) and the effects and dangers outgoing from the

consumers themselves (e.g. illegally high power input). Note! Sensitive consumers must be protected

additionally by external measures against destruction!

2,15 in the event of an error can deliver power supply units voltages over 50 V DC voltage, from which dangers

proceed, also then if the indicated output voltages of the devices lower is situated.

2,16 with work under voltage for it expressly certified tools may be only used.

2,17 the outputs of the power supply units (exit hub/clamps) and to it attached lines must be protected against

direct contact. In addition the used lines must sufficient isolation or tension strain possess and the contact

points be contact-voltage-proof (safety sockets).

2,18 shifting metallically bright lines and contacts is to be avoided. All these places are by suitable to take and to

protect thus against direct contact with difficulty inflammable insulants or other measures off. Also the

electrically leading sections of the attached consumers are to be protected by appropriate measures against

direct contact.

2,19 if to assume it is that a safe operation is no longer possible, then is the device out of operation to set and

against unintentional operation protect. It is to be assumed that a safe operation is no longer possible, if - the

device or the mains cable visible damages indicates, - the device any longer does not operate, - after longer

storage under unfavorable conditions, - after heavy transport stresses.

3. operating

the appliance becomes a associate to the mains plug St 1 at a earthing contactsocket 230 V / 50 Hertz

connected.Is responsible for seeing that the mains cable thus mislays will, that a damage the mains cable plus

uni- pull down of the apparatus prevents will. With that of the mains switch S1 becomes a the appliance

switched on and is thusaway ready for operation. With that of the turn-switch can the output voltage ac plus dc

via the built in bridge recitifier associate subsequent electrolyt capacitor in 2 V stepped discontinued will. The

decay the voltage takes place of the marked connector. The output voltage are additional a thermal automatic

circuit breaker provided security for.

4. Application

the input voltage 230V / 50 Hertz is via the internal fuse Si1 plus the mains switch to transformer put. All output

voltage are galvanic from the net separate. With that of the change-over switch can the on the silk-screen

Produkt Specifikationer

Mærke:	Statron
Kategori:	Ikke kategoriseret
Model:	5359.3

Har du brug for hjælp?

Hvis du har brug for hjælp til Statron 5359.3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Statron Manualer

Statron 2256.1 Manual

3 Oktober 2025

Statron 3252.1 Manual

2 September 2024

Statron 3250.1 Manual

2 September 2024

Statron 2225.4 Manual

2 September 2024

Statron 2225.2 Manual

2 September 2024

Statron 5359.3 Manual

2 September 2024

Statron 3254.1 Manual

2 September 2024

Statron 3262.1 Manual

2 September 2024

Statron 2223.2 Manual

2 September 2024

Statron 2224.9 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kenwood Elegancy ZJP11 Manual

4 Oktober 2025

Fisher & Paykel VB30SPEX3 Manual

4 Oktober 2025

Falmec Level One Manual

4 Oktober 2025

StarTech.com TBLT3MM2M Manual

3 Oktober 2025

Fisher & Paykel VB30SDEI3 Manual

3 Oktober 2025

Fisher & Paykel WB76SPEX3 Manual

3 Oktober 2025

Realme Q5 Manual

3 Oktober 2025

Lumantek ez-Pro VS4 Manual

3 Oktober 2025

Fisher & Paykel EB76PSX3 Manual

3 Oktober 2025

Inkbird ISC-027BW Manual

3 Oktober 2025