Statron 3262.1 Manual

Statron Ikke kategoriseret 3262.1

Læs gratis den danske manual til Statron 3262.1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Statron 3262.1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Technical data

operating voltage: : 230 V AC +7/-5%

frequency: : 50 bis 60 Hz

power input: : max. 10 A

source 1 source 2

output voltage: : 0,005 .... 40 V 0, .... 40 V 005

output current: : 0,003 ....10,0 A 0, ....10,0 A 003

voltage stability with +7/ -5% mains fluctuation: : < 1 mV < 1 mV

load compensating with 100% load change: : 3 mV 3 mV

current stability with +6 / -10 % mains fluctuation: : 1 mA 1 mA

remaining ripple with nominal load: : ca. 2mVeff bzw. 4 mAef

ca. 2mVeff bzw. 4 mAef

mains fuse: : 2x 4,0A T 2x 4,0A T

acting voltage display: : LCD with 3½ digits LCD with 3½ digits

current display: LCD with 3½ digits LCD with 3½ digits

weight: : ca. 23 kg

dimensions (B x H x T): : 451 x 134 x 410 mm

site conditions

operating temperature area: : +10 °C bis +35 °C

Air humidity: : max. 85 %

air pressure: : 800 bis 1333 hPa

Statron Gerätetechnik GmbH

Ehrenfried-Jopp-Straße 59

15517 Fürstenwalde

Tel.: (03361) 37 21 01

Fax: (03361) 37 21 03

e-Mail : statron@statron.de

Internet: www.statron.de

Operating instruction lab

power supply unit

type 3262.1

The intended application of the power supply unit covers:

- link and operation of low-voltage consumers with an operating voltage between 0 and 40 VDC. The power input

of the consumer may not exceed 10,0 A.

Note! Absolutely read!

- Read this guidance exactly. With damage, which is caused by neglect of the guidance, the warranty claim goes

out. For damages we do not take over adhesion.

1. introduction

this power supply unit is universally applicable with its infinitely variable adjustment possibilities of voltage and

current for school, occupation, hobby etc.. An electronic current limiting protects the power supply unit against

overloading. Output voltage and - current are electronically stabilized and infinitely variable adjustable. Thus the

electronic restraint current can as adjustable Current limiting to be used, in order to protect consumers against a too

high power input. In the case of an overloading the output voltage is then lowered accordingly (in the case of short-

circuit on close 0V). With removal of the overload the output voltage adjusted before resets itself automatically. The

respective operating point - voltage - (u) - or restraint current (i) - is displayed by one red LED each. The adjusted

values are readable over 2 LCD displays or analog displays each. The voltage or current adjustment is made by

one double button each (rough- fine). Additionally a change .

Produkt Specifikationer

Mærke:	Statron
Kategori:	Ikke kategoriseret
Model:	3262.1

Har du brug for hjælp?

Hvis du har brug for hjælp til Statron 3262.1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Statron Manualer

Statron 3252.1 Manual

2 September 2024

Statron 3250.1 Manual

2 September 2024

Statron 2225.4 Manual

2 September 2024

Statron 2225.2 Manual

2 September 2024

Statron 5359.3 Manual

2 September 2024

Statron 3254.1 Manual

2 September 2024

Statron 3262.1 Manual

2 September 2024

Statron 2223.2 Manual

2 September 2024

Statron 2224.9 Manual

2 September 2024

Statron 3256.1 Manual

22 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet Audio P100CPA Manual

15 Juni 2025

Sabrent BK-MAC2 Manual

15 Juni 2025

Planet Audio P9950CPA Manual

15 Juni 2025

Filmcity FC-CTH-01 Manual

15 Juni 2025

Cleveland 22CGT6 Manual

15 Juni 2025

Auray SVRK-4U-S Manual

15 Juni 2025

Bobrick B-2860 Manual

15 Juni 2025

Sony ODBK-103 Manual

15 Juni 2025

Planet Audio P70CPA Manual

15 Juni 2025

Gourmia GAF657 Manual

15 Juni 2025