Sweex LAN PCI Network Card 10/100 Mbps Manual

Sweex Netværkskort/adapter LAN PCI Network Card 10/100 Mbps

Læs gratis den danske manual til Sweex LAN PCI Network Card 10/100 Mbps (3 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Sweex LAN PCI Network Card 10/100 Mbps, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Introduction

First of all, many thanks for purchasing this Sweex LAN PCI Card. To ensure this product operates correctly, we advise you to carefully read this

manual first. If despite this manual you still experience problems during installation or operation of this product, go to www.sweex.com and look

under the heading service & support.

We advise you to ensure that the PC operating system is up-to-date before starting the installation. This is easy to check by starting up “Internet

Explorer” and selecting the option “Windows Update” in the “Extra” menu. This Sweex LAN PCI Card is fully supported by Windows Microsoft®,

Windows® XP, Windows Vista®, Windows® 7.

Package Contents

Prior to installation, check if all required parts are present. The following parts must be present in the box:

• 10/100NetworkcardPCI  

• Quickinstallationguide  

• CDwithsoftware,drivers,manual  

If one of the above parts is missing, please contact the supplier.

Specifications

• Single-chipcontrollerforPCIlocalbusrevision2.2

• Supports:‘WakeOnLAN’(WOL)atPCIrevision2.2

• Inaccordancewith802.310BASE-TandIEEE802.3u100BASE-TXstandard

• Realtek8139chipset

• SingleshieldedRJ-45connectorforuseat10or100Mbps

• HighperformancebusmasterstructureforlowCPUandbususage

• Supports:ACPIandPCIpowermanagement

• 1diagnosisLEDforlinkstatusanddatatransfer

• Supports:WindowsMicrosoft®,Windows®XP,WindowsVista®,Windows®7

English version

Installation of hardware

Take the following precautionary measures prior to installing the hardware:

• EnsurethePCisswitchedoffandnotconnectedtothemainsoranyotherpowersupply.

• Also,disconnecttheprinterandmonitorcables(theyhavetheirownpowersupply)tomakeabsolutelysurethatthePCisnotlive.

• Nowunscrewthecomputercasing.

• Subsequently,removeanystaticelectricityyoumaycarryonyourbody.Dothisbytouchinga(neutral)pipeofthecentralheatingsystem

oranunpaintedwaterpipe,amongotherthings.Pleasenotethatyoumustnotuseamagneticscrewdriverforthis.Beforeyouproceedany

further, shortly touch the iron frame of the PC casing. Make sure that you minimise contact with any contact points of the PC Card or the

memory.

• FindavacantPCIslotandremovethemetalguardplatepartofthecomputercasinginfrontoftherelevantslot.Onoccasionthecarddoes

not allow to be inserted in the PCI slot smoothly. Should this be the case, do not force anything, but try another available slot.

• Oncethecardhasbeensuccessfullyinstalled,checkwhetherallothercardsarestillproperlyinsertedinthePCIslots.Itispossiblethatthe