Synco G1A1 Manual

Synco Mikrofon G1A1

Læs gratis den danske manual til Synco G1A1 (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Synco G1A1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Thank you for choosing SYNCO product.

Please read this manual carefully before use and follow all instructions

mentioned herein.

Microphone G1A1

User Manual

Caring For Your SYNCO Product

Please keep the product in a dry, clean, dust-free environment.

Keep corrosive chemicals, liquids and heat source away from the

product to prevent mechanics damage.

Use only a soft and dry cloth for cleaning the product.

Malfunction may be caused by dropping, impact of external force.

Do not attempt to disassemble the product. Doing so voids warranty.

Please have the product checked or repaired by authorized technicians

if any malfunctions happened.

Failure to follow all the instructions may result in mechanics damage.

Warranty does not apply to human errors.

Product Instruction

TX Transmitter

RX Receiver

① Type-C Charging Port / Digital

Output

② On/ O󽗈 Button (Mono / Stereo /

Protected Channel)

③ 3.5mm TRS Output

④ 3.5mm Monitoring Port

① External Mic Input

② Type-C Charging Port

③ On/ O󽗈 Button

④ Built-in Mic

⑤ Power Indicator

⑥ Paring Indicator

⑦ Noise Reduction

⑧ Gain Adjustment of TX

⑨ Magnet Pocket Clip

⑩ Contacts

⑤ Power Indicator

⑥ Paring Indicator

⑦ Gain Adjustment of TX A

⑧ Gain Adjustment of TX B

⑨ Magnet Pocket Clip

⑩ Contacts

Indicator - TX

Indicator - RX

Unpaired

Blue Slow Flashes

Paired ( with Mute & Noise

Reduction o󽗈 )

Protection Channel Mode

( R channel with less than 6dB)

Blue Keeps on

Blue & Red Both on

Pairing

Indicator

Pairing

Indicator

Power

Indicator

Power

Indicator

Mute on

Paired ( Mono Channel )

Red Keeps on

Blue Keeps on

Noise Reduction on

Stereo Mode

Blue & Red Both on

Red Keeps on

Charging ( Turns o󽗈 when fully

charged )

Charging ( Turns o󽗈 when fully

charged )

Green Keeps on

Warning of low battery

Green Flashes

1. Power On/ O󽗈

Power On

The TX and RX automatically turn on when long press the power button

for 3 seconds, and the blue status indicator light up.

Power O󽗈

The TX and RX automatically turn o󽗈 when long press the power button

for 3 seconds, and the red status indicator light o󽗈.

2. Pairing

Automatic Pairing

Automatically pairing after the TX/RX turns on.

Manual Pairing

(1) Long press the power button for 8 seconds while the TX is powered o󽗈

Operations

until the blue pairing indicator 󽗊ashes.

(2) Long press the power button for 8 seconds while the RX is powered o󽗈

until the blue /red/ green pairing indicators 󽗊ashes.

(3) The blue light keeps on when the TX successfully paired. ( And the red,

green and blue pairing indicators on the RX 󽗊ash for about 1 minute , and

the blue light keeps on when exit the pairing state).

3. Channel output connection

① 3.5mm OUT output

The receiver outputs the audio signal to the recording device via either a

3.5mm TRRS phone cable or a 3.5mm TRS camera cable. Please use the

appropriate cable according to your device.

( When using an external microphone, please insert it correctly Note:

into the microphone input jack. Only TRS interface microphones are

supported.)

Package List

RX Receiver x1 TX Transmitter x1 Carring Box x1

2-in-1 Charging Cable x1

External Lav Mic (With Wind Mu󽗈) x1

3.5mm TRRS Phone Cable x1

3.5mm TRS Camera Cable x1

Mic Windshield

Magnet x1

User Manual

Apple Adapter (With MFI Certi󽗉cation)

3.5mm TRRS Phone Cable

3.5mm TRS Camera Cable

② Type-C port digital output

The receiver Type-C port has a digital output function, which can directly

use the Type-C to Type-C cable to output mobile phones or computers

and other devices.

( When connecting the computer, enter the sound Settings and Note:

set the input microphone to SYNCO G1 Pro to use G1 recording; Set the

output speaker to SYNCO G1 Pro to use real-time ear return in the receiver

listening interface.)

4. Real-time monitoring

The 3.5mm monitoring port of the receiver supports digital monitoring,

which can simultaneously monitor the sound source of the transmitter

and the input sound source of the device.

3.5mm Monitoring Jack

Headphone Impedance: under 100 Ω

5. Volume Control

① Press the power button on the TX to turn on/o󽗈 the mute. When mute

is on, the red pairing indicator on the TX keeps on.

② Short press the gain adjustment button of the TX to adjust the volume

for 4 levels.

③ Short press the gain adjustment of A/B TX buttons on the RX to adjust

the volume of A/B TX.

6. Noise Reduction

Short press the noise reduction button on the TX to turn on/o󽗈 the

noise reduction function. When the noise reduction on, the red and blue

indicator light on the TX status light up at the same time.

7. Switch the Channel Mode

Short press the power button on the RX to switch the mono/stereo/

protected channel mode.

Default mono mode. When switching to stereo mode, the red pairing

indicator light keeps on. When switching the protection channel mode,

the blue&red paring indicator lights light on at the same time.

8. Charging

Connect the charging cable through Type-C port of TX and RX，and fully

charged in about 2 hours.

( The grey end of the 2-in-1 charging cable included in the package Note:

can be used for digital output. )

WARRANTY CERTIFICATE

USER

INFORMATION

SALES

INFORMATION

REPAIR

RECORD

RESULT

Please register your warranty. Meanwhile, you are welcomed to

via Email：support@syncoaudio.com

Customer Name:

Phone Number:

Email:

Address:

Sales Date:

Model:

Product Code:

Dealer:

Service Date:

Technician:

Issue:

Solved Unsolved Returned(Replaced)

Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue, Liwan

District, Guangzhou, China, 510000

support@syncoaudio.com

www.syncoaudio.com

https://www.facebook.com/syncomicrophones

Guangzhou Zhiying Technology Co., Ltd

Warranty Exclusions and Limitations

Faults resulted from inappropriate use of a product without following

its operation speci󽗉cation

Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking

Modi󽗉cations to a product by its user or a third party without prior

written consent of SYNCO, e.g. replacement of element or circuit, label

alteration

The code on product is inconsistent with that of warranty certi󽗉cate, or

the code on the product or warranty certi󽗉cate is altered or torn o󽗈

All consumable accessory attached to a product, like cable, wind mu󽗈,

battery

Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.

Warranty Claim Procedure

If failure or any problem occurs to your product after purchase, please

contact a local agent for assistance, or you can always contact SYNCO’s

customer service through email at support@syncoaudio.com.

Please retain your sales receipt and warranty certi󽗉cate as proof of

purchase. If any of these documents is missing, only sales return or

chargeable service will be provided.

If the SYNCO product is out of the warranty coverage, the service and

the parts cost will be charged.

Warranty Period

Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case of

quality defect(s) found in the product under normal use within 30 days

upon receipt of the product.

2. Original SYNCO products are entitled to limited warranty 12-month

service. The warranty period begins on the date of purchase of brand new,

unused products by the 󽗉rst end-user.

Within the warranty period, if product defect or failure is attributable to

material defection or technological problem, the defective product or

defective part will be repaired or replaced without charge (service and

materials fee).

Warranty

Form Factor

Polar Pattern

Frequency Range

Sensitivity

Maximum SPL

Built-in/External Mic

Omnidirectional

50Hz-20KHz

-40dB (±3 dB, re 1V/Pa at 1KHz)

120dB SPL (at 1KHz)

Microphone

Speci󽗉cations

Wireless Transmission

RF Frequency Band

Working Distance

Mounting

Audio Input

Power Requirements

Battery Type

Battery Charging Time

Battery Life

Dimensions

Material

Weight

Wireless Transmission

RF Frequency Band

Working Distance

Latency

Mounting

Number of Audio Channels

Audio Output

Gain

Power Requirements

Battery Type

Battery Charging Time

Battery Life

Dimensions

Material

Weight

Digital 2.4GHz

2400-2483.5MHz

656ft/200m (LOS area),

164ft/50m (NLOS area)

Pocket Clip

3.5 mm TRS Mic Input

5V 1A

Built-in Lithium Battery, 400mAh

52*42*16mm

ABS

35g

Digital 2.4GHz

2400-2483.5MHz

656ft/200m (LOS area),

164ft/50m (NLOS area)

20ms

Pocket Clip

3.5 mm TRS Mic Output

3.5 mm TRS Headphone Output

Type-C Output

1~30dB

5V 1A

Built-in Lithium Battery, 400mAh

52*42*16mm

ABS

35g

TX Transmitter

RX Receiver9. Mic Windshield & Device Installation

10. Setting The Recording Level Correctly

Camera devices generally have poor-quality, noisy preamps. In order to

get the cleanest signals possible, it is highly recommended that you set

the recording level on your camera quite low, 1/2 or 1/3 of it.

G1 provides variable gain control, allowing you to tailor your levels to just

about environment and recording device.

Adjust the recording level of inbuilt mics for SONY Camera

(Take A7S Ⅱ for example)

Adjust the recording level of inbuilt mics for Canon Camera

(Take EOS 5D Mark Ⅳ for example)

Adjust the recording level of inbuilt mics for Panasonic Camera

(Take LUMIX GH5 for example)

Produkt Specifikationer

Mærke:	Synco
Kategori:	Mikrofon
Model:	G1A1

Har du brug for hjælp?

Hvis du har brug for hjælp til Synco G1A1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrofon Synco Manualer

Synco WAir P2S Manual

11 September 2025

8 Juli 2025

5 Juli 2025

23 Juni 2025

2 April 2025

2 April 2025

Synco MC3 LITE Manual

2 April 2025

Synco G2A2 Manual

2 April 2025

Synco G1A1 Manual

2 April 2025

Synco G1 Pro Manual

2 April 2025

Mikrofon Manualer

Nyeste Mikrofon Manualer

Adam Hall 5730 Manual

11 September 2025

Point Source Audio Series8 CR-8S Manual

10 September 2025

Musicmate B-13 Manual

10 September 2025

Defender Space GMC 450 Manual

10 September 2025

Musicmate S-105N ClearTone Manual

10 September 2025

I.safe Mobile IS-RSM3A.1 Manual

10 September 2025

Krux Esper 1000 Manual

10 September 2025

Krux Epic 1000 Manual

9 September 2025

Røde SC7 Manual

9 September 2025

Cellular Line Talk Pro Manual

9 September 2025