Teradek Cube 505 Manual

Teradek Server Cube 505

Læs gratis den danske manual til Teradek Cube 505 (2 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Teradek Cube 505, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Stream Joystick:

, : Selects options from streaming/recording prompts

● (button press): Returns to main status screen, start/stop recordings and broadcasts

Menu Joystick:

▲,▼: Select menu items, change status screen on main display, select characters

: Back, move to higher menu level

,● (button press): Confirm selection, open selected menu

▲

NETWORK CONNECTION

L: Video Input

M: Status

N: Broadcast/Record

O: Fault/Error

P: Stream Joystick

Q: Menu Joystick

Connect power (via A/C adapter or Cubit) to the

power input (F) and video input to (C). Attach

antennas (A) via the threaded RP−SMA connectors.

Move power switch to the

ON position (G).

Use the included hot shoe mount and/or

/4" screw to mount Cube to your camera, tripod mount

or other accessory mount, if desired(B).

Cube defaults to Master mode, which will create and

advertise its own network name (SSID). Your computer,

decoder, or mobile device connects directly to Cube,

with no additional network equipment required.

1. On your computer or iOS device, open your

wireless networking utility.

2. Choose your Cube from the list of WiFi devices

in your area and connect to that network.

In Infrastructure mode, Cube connects to an existing network via a wireless access point or Ethernet

connection. Infrastructure mode allows Cube to communicate with all devices on the network and is required

for streaming to the Internet.

Wireless range can be greatly improved by using a wireless access point.

Connecting Cube to an existing wireless network:

POWER & CONNECT

AC adapter

Cubit

SDI

HDMI

OPTION A:

MASTER MODE: Connect Cube to one other device.

OPTION B:

INFRASTRUCTURE MODE: Add Cube to an existing network.

WiFi CONNECTION ON MAC/PC OR iPAD

1. Enter the main menu by pressing

▲

or ●.

Select

Network Setup with ▼ and enter the

menu with

▲

2. Select

Configure.

6. If prompted, enter your network password. Choose

characters with

▲ and ▼, choose the position

with

▲

and

▲

, and confirm with ●. To cancel, press ●.

4. From the WiFi Configuration menu, choose

Scan.

3. Select Mode, and then choose

Infrastructure.

The Wireless mode will be set.

8. Once configured, you can view the network status

by selecting

Status from the Network Setup menu.

7. Choose Yes to Apply the new Network settings.

5. Select your preferred network, (the

icon

indicates a secured network), and the number

on the far right is the signal strength.

NEED MORE HELP?

1. Support forum: http://forum.teradek.com → Contains tips, information and all the latest firmware & software updates.

2. Training videos: http://vimeopro.com/teradek/cube−training−videos

TERADEK SUPPORT STAFF: support@teradek.com or call 888−941−2111 ext2 (Mon−Fri 9am to 6pm PST)

CUBE’S WEB UI LOGIN

username: admin

password: admin

A: Wireless Antenna

B: Hot shoe mount &

/4" screw

C: Video Input (SDI or HDMI)

D: Line/MIC Audio Input

E: Headphone Audio Output

F: Power Input

G: Power Switch

H: Stream Joystick

I: Menu Joystick

J: OLED Display

K: Status LEDs

Produkt Specifikationer

Mærke:	Teradek
Kategori:	Server
Model:	Cube 505
Bredde:	63.5 mm
Dybde:	88.9 mm
Højde:	22.86 mm
Vægt:	226.8 g
Produktfarve:	Sort
Kompatible hukommelseskort:	MicroSD (TransFlash)
Antal USB 2.0-porte:	1
Understøttede netværksprotokoller:	TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
Webbaseret administration:	Ja
Indbygget kortlæser:	Ja
Video komprimeringsformater:	H.264
Maksimal videoopløsning:	- pixel
Maksimum billedhastighed:	- fps
Kobber ethernet kabelteknologi:	100BASE-TX
PTZ-kontrol:	Ingen
BNC-indgangsporte:	1
Alarmindgang/-udgang:	Ja