Teradek Cube 655 Manual

Teradek Server Cube 655

Læs gratis den danske manual til Teradek Cube 655 (2 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Teradek Cube 655, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

CONNECT TO CUBE

STREAM TO THE INTERNET

Connect power to Cube using the included A/C adapter or one of the available accessory power cables

(see Teradek.com).

Connect to Cube’s Wi−Fi network: Teranet−XXXXX (serial number of the device).

Plug an Ethernet cable into Cube’s 10/100/1000 Ethernet port and connect it to an Ethernet switch

or router.

Open Cube’s web UI, Select the Video Stream Output menu if it is not already displayed.

Connect the SDI or HDMI output from your video source to one of Cube’s video input connectors . (J)

Open a web browser and navigate to http://172.16.1.1, or find Cube using Bonjour.

Connect your computer to the same network. Cube’s IP address is displayed on the front panel’s Ethernet

Status menu, access it by pressing down on the Menu joystick to cycle through status screens.

Select Internet Streaming as the Stream Mode and choose a platform − Facebook, Ustream, Livestream,

YouTube, Twitch − or select manual RTMP.

Select your desired Audio/Video bitrate and resolution under the Encoder menu.

Cube’s Wi−Fi can be configured to join your network via the web UI or front panel.

Open a web browser and navigate to Cube’s IP address, or find Cube using Bonjour.

Enter your credentials and choose a channel/event, or enter the RTMP destination info and press apply.

Go Live by clicking the Broadcast button

, or use the front panel Stream Joystick

Cube has a built in web interface for configuring stream destinations, encoder parameters,

and other settings. The interface can be accessed by connecting via Wi−Fi or wired Ethernet.

PHYSICAL CONNECTIONS

WI FI−

CONNECT TO A WIRED NETWORK

NEED MORE HELP?NEED MORE HELP?

1. Support: http://support.teradek.com Contains tips, information and all the latest firmware & software updates.→

TERADEK SUPPORT STAFF: support teradek.com or call 888 941 2111 ext2 (Mon Fri 9am to 6pm PST)@− − −

1. Support: http://support.teradek.com Contains tips, information and all the latest firmware & software updates.→

TERADEK SUPPORT STAFF: support teradek.com or call 888 941 2111 ext2 (Mon Fri 9am to 6pm PST)@− − −

600 series

Stream Joystick:

● : Access quick menu actions, exit menu screens(button press)

Menu Joystick:

▲▼ , ,

▲

: Select menu items, change status screen on main display, select characters

● (button press): Confirm selection, open selected menu

Reset Button:

Hold for 3−6 seconds: Reset all network settings

Hold for 10+ seconds: Perform complete factory reset

A: Wi−Fi Antenna

B: Video input status

C: Encoder status

D: Broadcast status

E: SD/MMC Card slot

F: Fault/Error

G: OLED display

H: Stream Joystick

I: Menu Joystick

J: SD/HD/3G−SDI and HDMI inputs

K: 10/100/1000 Ethernet

L: Reset button

M: Power Switch

N: Power Input

O: 1/8" Headphone output

P: Mic/Line stereo input

Q: USB Port

CUBE 600 QG.indd 1 3/20/17 2:44 PM

Produkt Specifikationer

Mærke:	Teradek
Kategori:	Server
Model:	Cube 655
Bredde:	120.7 mm
Dybde:	76.2 mm
Højde:	27.9 mm
Vægt:	328.9 g
Produktfarve:	Sort
Kompatible hukommelseskort:	SD
Wi-Fi:	Ja
Ethernet LAN-porte (RJ-45):	1
Antal USB 2.0-porte:	1
Strømforbrug (typisk):	8 W
Sikkerhedsalgoritmer:	64-bit WEP, 128-bit AES, 128-bit WEP, WPA, WPA2
Netværksstandarder:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x
Understøttede netværksprotokoller:	TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
Webbaseret administration:	Ja
Indbygget kortlæser:	Ja
Video komprimeringsformater:	H.264
Effektkrav:	6-28 V DC
Maksimal videoopløsning:	- pixel
Maksimum billedhastighed:	- fps
PTZ-kontrol:	Ingen
BNC-indgangsporte:	1
Antal HDMI-indgangsporte:	1
Bithastighed ved en maksimal videoopløsning:	15 Mbit/s