Tripp Lite APS2012 Manual

Tripp Lite Batteri APS2012

Læs gratis den danske manual til Tripp Lite APS2012 (24 sider) i kategorien Batteri. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Tripp Lite APS2012, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

Owner’s Manual

Reliable Emergency Backup Power

Congratulations! You've purchased the most advanced, feature-rich Inverter/Charger designed as an alternative energy source during utility

power failures. Tripp Lite APS Inverter/Chargers keep your equipment up and productive through all utility power problems (blackouts,

brownouts and overvoltages) by inverting DC power from user-supplied batteries into AC power. When utility power is present, APS Inverter/

Chargers automatically pass through power to your equipment while simultaneously recharging your connected battery bank. Built-in surge

suppression provides an additional level of equipment protection. APS Inverter/Chargers are the quiet alternative to gas generators for emergency

backup applications. You get AC electricity anywhere and anytime you need it—with no fumes, fuel or noise!

Better for Your Equipment Premium Protection Levels

 • Built-InISOBAR

Surge Protection

 • AutomaticOverloadProtection

 IdealOutputforAllLoads

 • Frequency-ControlledOutput

 • AutomaticLoadSwitching

 • BalancedLoadSharing

Better for Your Batteries FasterBatteryRecharge

 • High-Amp,3-StageBatteryCharger(adjustable)

Critical Battery Protection

 • BatteryChargeConserver(LoadSense)

 • BatteryTemperatureSensing

 • High-EfficiencyDC-to-ACInversion

Better for You Quiet,Simple,Maintenance-FreeOperation

 • Multi-FunctionLights&Switches

 • Moisture-ResistantConstruction*

Safety 2

Feature Identification 3

Operation 4-5

Configuration 5-7

Battery Selection 8

Mounting 9

Battery Connection 10

AC Input/Output Connection 11

Service/Maintenance 11

Troubleshooting 12

Warranty/Warranty Registration 12

Español 13

PowerVerter

APS Series DC-to-AC

Inverter/Charger

Input Output

Invert: 12 VDC 120V, 60 Hz. AC

Charge: 120V, 60 Hz. AC 12 VDC

1111 W. 35th Street, Chicago, IL 60609 USA

Customer Support: 773.869.1234

www.tripplite.com

* Inverter/Chargers are moisture-resistant, not waterproof.

and Isobar

are registered trademarks of Tripp Lite.

Contents

WARRANTY

REGISTRATION

a chance to win a FREE Tripp Lite

product! www.tripplite.com/warranty

Important Safety Instructions

SAVE THESE INSTRUCTIONS!

This manual contains important instructions and warnings that should be followed during the installation, operation and storage of this

product.

Location Warnings

• InstallyourInverter/Chargerinalocationorcompartmentthatminimizesexposuretoheat,dust,directsunlightandmoisture.

• AlthoughyourInverter/Chargerismoistureresistant,itisNOTwaterproof.Floodingtheunitwithwaterwillcauseittoshortcircuit

 andcouldcausepersonalinjuryduetoelectricshock.Neverimmersetheunit,andavoidanyareawherestandingwatermight

accumulate. Mounting should be in the driest location available.

• Leaveaminimumof2"clearanceatfrontandbackoftheInverter/Chargerforproperventilation.ToavoidautomaticInverter/Charger

shutdown due to overtemperature, any compartment that contains the Inverter/Charger must be properly ventilated with adequate

outside air flow. The heavier the load of connected equipment, the more heat will be generated by the unit.

• DonotinstalltheInverter/Chargerdirectlynearmagneticstoragemedia,asthismayresultindatacorruption.

• Donotinstallnearflammablematerials,fuelorchemicals.

• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously

inhibit the unit's internal cooling, eventually causing product damage not covered under warranty.

Battery Connection Warnings

• TheInverter/Chargerwillnotoperate(withorwithoututilitypower)untilbatteriesareconnected.

• Multiplebatterysystemsmustbecomprisedofbatteriesofidenticalvoltage,age,amp-hourcapacityandtype.

• Becauseexplosivehydrogengascanaccumulatenearbatteriesiftheyarenotkeptwellventilated,yourbatteriesshouldnotbe

installed (whether for a mobile or stationary application) in a “dead air” compartment. Ideally, any compartment would have some

ventilation to outside air.

• Sparksmayresultduringfinalbatteryconnection.Alwaysobserveproperpolarityasbatteriesareconnected.

• DonotallowobjectstocontactthetwoDCinputterminals.Donotshortorbridgetheseterminalstogether.Seriouspersonalinjury

or property damage could result.

Equipment Connection Warnings

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the

failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this

equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

• OnlyconnectyourInverter/ChargertoaproperlygroundedACpoweroutletorhardwirepowersource.Donotplugtheunitintoitself;

this will damage the device and void your warranty.

• Youmayexperienceunevenperformanceifyouconnectasurgesuppressor,lineconditionerorUPSsystemtotheoutputofyour

Inverter/Charger.

Operation Warnings

• Your Inverter/Charger does not require routine maintenance. Do not open the device for any reason. There are no user serviceable parts inside.

• PotentiallylethalvoltagesexistwithintheInverter/Chargeraslongasthebatterysupplyand/orACinputareconnected.Duringany

service work, the battery supply and AC input connection (if any) should therefore be disconnected.

• DonotconnectordisconnectbatterieswhiletheInverter/Chargerisoperatingineitherinvertingorchargingmode.OperatingMode

 SwitchshouldbeintheDCOFFposition.Dangerousarcingmayresult.

Caution: Your Inverter/Charger has a failsafe AC pass-through feature. The AC output will be live (if AC input is

available) even though the operating mode switch is set to DC OFF.

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Batteri
Model:	APS2012
Bredde:	215.9 mm
Dybde:	412.8 mm
Højde:	184.2 mm
Vægt:	18140 g
Produktfarve:	Sort
Pakkevægt:	19500 g
Pakkedybde:	535.9 mm
Pakkebredde:	365.8 mm
Pakkehøjde:	325.1 mm
Dimensioner (BxDxH):	215.9 x 412.8 x 184.2 mm
Udgangseffekt:	2000 W
Udgangsspænding:	120 V
Udgangsstrøm:	25 A
Pakkens dimensioner (BxDxH):	15 x 21.5 x 13.25 "
Harmoniseret systemkode (HS):	8504.40.9570
Hovedkassen højde (udvendigt):	325.1 mm
Hovedkassens længde (udvendigt):	535.9 mm
Hovedkassens bruttovægt (udvendigt):	19500 g
Hovedkassens bredde (udvendigt):	365.8 mm
Oprindelsesland:	Kina
Produkter pr. hovedkasse (udvendigt):	1 stk