V-TAC VT-121 Manual

V-TAC Lys VT-121

Læs gratis den danske manual til V-TAC VT-121 (15 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om V-TAC VT-121, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully

before starting the installing and keep this manual handy for future reference. If you have any another query, please contact

our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the

best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by

incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to

incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of

product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only. The LED

tube can be used in hotels, oces, factories, conference rooms, meeting rooms, commercial complexes, residential

buildings, schools, colleges, universities, hospitals, etc.

PACKAGE CONTENT

• LED Tube (1PC)

• Instruction Manual (1PC)

• Dummy Starter (1PC)

WEEE Number : 80133970

T8 LED TUBES

DUMMY STARTER

INCLUDED

STARTER

FOR LED TUBES

TECHNICAL DATA

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE

CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

MODEL

SKU

VT-061

21650,21651,21652 21653,21654,21655 21656,21657,21658 21686,21687,21798 21672,21673,21688 21674,21675,21799

VT-121 VT-151 VT-062 VT-122 VT-152

WATTS 9W 18W 20W 7.5W 16.5W 24W

LUMENS 850LM@Sphere360° 1850LM@Sphere360° 2100LM@Sphere360° 850LM@Sphere360° 1850LM@Sphere360° 3000LM@Sphere360°

CRI >80 >80 >80 >80 >80 >80

DF >0.5 >0.7 >0.7 >0.5 >0.7 >0.7

BEAMANGLE 160° 160° 160° 160° 160° 160°

BODY TYPE

IP RATING

Plastic

IP20 IP20 IP20 IP20 IP20 IP20

Plastic Plastic Plastic Plastic Plastic

HOLDER G13 G13 G13 G13 G13 G13

LONG LIFE 25,000 Hours 25,000 Hours 25,000 Hours 25,000 Hours 25,000 Hours 25,000 Hours

ON/OFF CYCLES >15,000 >15,000 >15,000 >15,000 >15,000 >15,000

DIMENSION 600x28mm 1200x28mm 1500x28mm 600x28mm 1200x28mm 1500x28mm

INPUT POWER AC:220-240V,50Hz AC:220-240V,50Hz AC:220-240V,50Hz AC:220-240V,50Hz AC:220-240V,50Hz AC:220-240V,50Hz

INSTRUCTION MANUAL

ROTATING

180°

WARNING

INSTALLATION & REPLACEMENT OF FLUORESCENT LAM

(SINGLE MAGNETIC BALLAST CIRUIT)

NEW FITTING INSTALLATION

Single Side Power Only

WIRING DIAGRAM

1. o the power Switch 2. Remove the existing

ﬂuorescent lamp

3. Remove the existing

ﬂuorescent starter

4. Insert LED T8 starter 6. Switch ON the power5. Insert V-TAC LED Tube

LED

Le Right

(L)

(N)

V-TAC

INPUT LED TUBE

INSTALLATION INSTRUCTION

AC:220-240V

50Hz

WIRING DIAGRAM

Le RightLED TUBE

Inductance Ballast

LED Starter

V-TAC

INPUT

AC:220-240V

50Hz

• Installation should only be done by a `certiﬁed

electrician.

• Please refer to the wiring diagram for

replacingﬂuorescent tube on a single magnetic

ballast circuit with V-TAC LED Tube.

• Installation should only be done by a certiﬁed

electrician

• Switch O the power.

• Ensure the wiring diagram is followed as highlighted.

• Insert V-TAC LED Tube.

• Switch On the power to test the light.

• Installation should only be done by a certiﬁed electrician

• Operation environment temperature: -20°C to +45°C.

• For Indoor use only

• Do not use DC electricity.

• Do not modify the ﬁtting to be used with the LED Tube.

• V-TAC LED Tubes are NOT designed to be used in emergency operations.

• For Indoor use only.

• Do NOT use with electronic ballasts. V-TAC LED tubes are not compatible with electronic ballast circuit. In

order to use the electronic ballast ﬁtting you must ensure to remove the electronic ballast from the ﬁtting

and rewire the circuit as per new ﬁtting installation as shown below. Ensure the installation and wiring is

carried out by certiﬁed electrician.

This marking indicates that this

product should not be disposed of

with other household wastes.

Caution, risk of electric shock.

Produkt Specifikationer

Mærke:	V-TAC
Kategori:	Lys
Model:	VT-121
Kode for international beskyttelse (IP):	IP20
Vekselstrømsindgangsspænding:	220-240 V
Vekselstrømsindgangsfrekvens:	50 Hz
Vægt:	175 g
Produktfarve:	Hvid
Driftstemperatur (T-T):	-20 - 45 °C
Husmateriale:	Plast
Certificering:	CE, EMC
Energieffektivitetsskala:	A til G
Diameter:	27.9 mm
Energieffektivitetsklasse:	G
Pæreeffekt:	18 W
Lysfarve:	Klar hvid
Farvetemperatur:	4000 K
Bæredygtighedscertifikater:	RoHS
Indgangsspænding:	220 - 240 V
Lysstrøm:	1700 lm
Strålevinkel:	160 °
Pære levetid:	20000 t
Dæmpbar:	Ingen
Længde:	900 mm
Antal lyskilder:	1 pære(r )
Indgangsfrekvens:	50 Hz
Pæreform:	Rør
Pasform/dække type:	G13
Strøm faktor:	0.5
Ækvivalent pæreeffekt:	36 W
Farve-gengivelse (CRI):	80
Opstartstid:	0.001 sek./side
Gennemsnitlige cyklusser mellem fejl (MCBF):	15000
Energiforbrug pr. 1000 timer:	18 kWh