V-TAC VT-12118 Manual

V-TAC Lys VT-12118

Læs gratis den danske manual til V-TAC VT-12118 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 60 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 30.5 anmeldelser. Har du et spørgsmål om V-TAC VT-12118, eller vil du spørge andre brugere om produktet?

Side 1/2
LED GLASS POOL LIGHT
INSTRUCTION MANUAL
INTRODUCTION & WARRANTY
TECHNICAL DATA
Thank you for selecting and buying V-TAC LED product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installing and keep this manual handy for future reference. If you
have any other query, please contact our dealer or local vendor from whom you have purchased the prod-
uct. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused
by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any
surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours
Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted
for manufacturing defects only.
MODEL
VT-12118 8024
8025
8026
18W
25W
35W
2000LM AC/DC 12V, 50/60Hz 178x110mm
178x110mm
178x110mm
AC/DC 12V, 50/60Hz
AC/DC 12V, 50/60Hz
2850LM
4100LM
VT-12125
VT-12135
WATTS LUMENS INPUT VOLTAGE DIMENSIONSKU
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in
multiple languages.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
This marking indicates that this product
should not be disposed of with other
household wastes. Caution, risk of electric shock.
WARNING
INSTALLATION INSTRUCTIONS
1. Install only by certified electrician.
2. Please make sure to turn o the power before starting the installation.
3. The light source of this luminaire is not replaceable, when the light source reaches
its end of life the whole luminaire should be replaced.
4. Proper grounding should be ensured throughout the installation.
12
3STEP 1
Take out the pool embedded parts,
twist o the screws from the lid, and then
take o the lid.
STEP 2
Connect the power output cable of
the embedded parts with the terminals of
the lamp, and then tighten the screws.
STEP 3
Put the lamp, into the embedded parts
and cover the lid and tighten the
screws.


Produkt Specifikationer

Mærke: V-TAC
Kategori: Lys
Model: VT-12118

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-12118 stil et spørgsmål nedenfor, og andre brugere vil svare dig