V-TAC VT-17018 Manual

V-TAC Lys VT-17018

Læs nedenfor 📖 manual på dansk for V-TAC VT-17018 (27 sider) i kategorien Lys. Denne guide var nyttig for 3 personer og blev bedømt med 4.3 stjerner i gennemsnit af 2 brugere

Side 1/27
INSTRUCTION MANUAL
COB DOWN LIGHT
HONEY COMB SERIES
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
TECHNICAL DATA
MODEL VT-17012 VT-17018 VT-17024
SKU 23671, 23672 23673, 23674 23675, 23676
INPUT VOLTAGE AC: 100-240V, 50/60Hz
WATTS 12W 18W 24W
DC VOLTAGE 24-48V 36-72V 30-38V
LUMENS 1180 Lm
1860 Lm 2540 Lm
BEAM ANGLE 24°
CRI ≥90
ON/OFF CYCLE 15,000 Times
LIFE SPAN 20,000 Hours
COLOR TEMPERATURE 3000K-4000K-6400K (Selectable)
WORKING TEMPERATURE -20°C to +40°C
MATERIAL Aluminium
IP RATING IP20
CUT OUT SIZE 75mm 95mm 115mm
DIMENSION 86x44mm 106x46mm 135x51mm
*This product contains a light source of energy
eciency class<F>, where <F> shall be replaced by
the energy class of the contained light source.
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, risk of electric shock.
Non-replaceable light
source by professionals
Replaceable control gear
by professionals
Luminaires not suitable for
covering with thermally
insulating material.
1. Turn o the power.
2. Cut a hole in the ceiling (refer to the Technical Data for the correct cutout size).
3. Connect the driver’s input wires to the main power supply.
4. Adjust the CCT knob to your desired color temperature.
5. Position the spring clips and insert the downlight into the hole.
6. Switch on the power and test the light.
BROWN/RED - L BLACK/BLUE - N
WARNING
INSTALLATION DIAGRAM
WIRING DIAGRAM
1. Please make sure to turn o the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
4. If the external flexible cable or cord of this luminaire is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar
qualified person in order to avoid a hazard.
5. For Indoor Use only


Produkt Specifikationer

Mærke: V-TAC
Kategori: Lys
Model: VT-17018

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-17018 stil et spørgsmål nedenfor, og andre brugere vil svare dig