V-TAC VT-44012 Manual

V-TAC Lys VT-44012

Læs gratis den danske manual til V-TAC VT-44012 (3 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 2 anmeldelser. Har du et spørgsmål om V-TAC VT-44012, eller vil du spørge andre brugere om produktet?

Side 1/3
PRODUCT
WEIGHT
DIMENSION
OPERATION
TEMPERATURE
MAX
MOUNTING
HEIGHT
AREA(M²)
5 m130g 30-40
60-75
40-50
1640g
820g
5 m
5 m
100-125
150-200
180g
375g176x152x25mm
96x90x25mm
375x310x30mm
253x225x29mm
116x106x25mm
5 m
5 m
VT-44022
VT-44054
VT-44012
23971, 23972
23973, 23974
10W 730 lm 11 20,000 800.9
AC: 220-240V,
50/60Hz
AC: 220-240V,
50/60Hz
AC: 220-240V,
50/60Hz
AC: 220-240V,
50/60Hz
AC: 220-240V,
50/60Hz
80
80
80
80
0.9
0.9
0.9
0.9
20,000
20,000
20,000
20,000
11
11
11
11
16450 lm
8150 lm
1510 lm
4000 lm
200W
100W
23975, 23976
23977, 23978
23991
23979, 23980
23981, 23982
23992
23983, 23984
23985, 23986
23987, 23988
23989, 23990
23995
VT-44208
VT-44109
20W
50W
INPUT
VOLTAGE
CRIDF
LIFE
SPAN
[HOURS]
BEAM
ANGLE
USEFUL
LUMENS
WATTSMODEL SKU
INTRODUCTION & WARRANTY
TECHNICAL DATA
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully
before starting the installing and keep this manual handy for future reference. If you have any another query, please
contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you
at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by
incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of prod-
uct for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
INSTRUCTION MANUAL
LED FLOOD LIGHT
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Please make sure to turn o the power before starting the installation.
Installation must be performed by a qualified electrician.
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
The external flexible cable or cord of this luminaire cannot be replaced; if
the cord is damaged, the luminaire shall be destroyed.
Terminal block not included.
Must be connected to waterproof terminal box
Proper grounding should be ensured throughout the installation.
For outdoor use.
Replace any cracked protective shield.
Minimum distance from lighted objects 1m.
Wire Length : 120mm
INSTALLATION DIAGRAM
WARNING
NOTE
To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be eectively
fixed to the wall if the wiring is within arm's reach.
In order to maintain the IP protection of the product, the cable entry/gland should be installed on the
bottom side.
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, risk of electric shock.
1
4
5
2
3
Brown L
Blue N
Yellow green
Non-replaceable light source
Non-replaceable control gear


Produkt Specifikationer

Mærke: V-TAC
Kategori: Lys
Model: VT-44012

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-44012 stil et spørgsmål nedenfor, og andre brugere vil svare dig