V-TAC VT-44300 Manual

V-TAC Lys VT-44300

Læs gratis den danske manual til V-TAC VT-44300 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om V-TAC VT-44300, eller vil du spørge andre brugere om produktet?

Side 1/2
VT-44010
10W
SKU
9898,9899,10010
10026
10011,10012,10013
10014,10015,10016
10020,10021,10022
10027,10028,
10029,10030
10031,10032
10033,10034
10023,10024,10025
10017,10018,10019
VT-44020
20W 1620LM 126.5x28x114mm
VT-44030
30W 2505LM 164x29x139mm
VT-44050 50W 4270LM
183x29x169mm
VT-44200
200W 405x36x326mm17540LM
VT-44300
300W 26390LM
115°
115°
115°
115°
115°
115°
>70
>70
>70
>70
>70
>70
>0.9
>0.9
>0.9
>0.9
>0.9
>0.9 496x49x445mm
*This product contains a light source of energy efficiency class<F>,where <F> shall be replaced by the energy
class of the contained light source.
NOTE: To reduce the risk of strangulation the flexible
wiring connected to this luminaire shall be effectively
fixed to the wall if the wiring is within arm's reach.
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
INSTRUCTION MANUAL
LED FLOOD LIGHT
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installing and keep this manual handy for future reference. If you
have any another query, please contact our dealer or local vendor from whom you have purchased the
product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the
date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear
and tear. The company gives no warranty against damage to any surface due to incorrect removal and
installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for
24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
INTRODUCTION & WARRANTY
• DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERA-
TURE RANGE. *CONNECT WITH WATERPROOF CABLE HOUSE ONLY. *ENSURE ELECTRICITY IS SWITCH
OFF BEFORE INSTALLATION.
• Please do not mount to a surface that is prone to vibrations.*
Remove the screw and the bracket afterward. (Figure 1)Before drilling, mark the hole position for fixing
the bracket onto the wall (Screw not supplied). (Figure 2)
• Screw the retaining bracket to the wall with a suitable quantity of screws. (Figure 3)
• Mount the bracket back to the fixture. Adjust the floodlight according to the desired position. Tighten
the screw. (Figure 4) Connect your main cable (H05RN-F3G1.0mm2 Recommended) with the input lead
of our product through the waterproof junction box. Note, the line (-) of the lead. (Figure 5) (Need to
use the junction box of IP65 or above, ensure to tighten the waterproof screw) Switch on the power to
make sure if the product Is working.
INSTALLATION INSTRUCTION


Produkt Specifikationer

Mærke: V-TAC
Kategori: Lys
Model: VT-44300

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-44300 stil et spørgsmål nedenfor, og andre brugere vil svare dig