V-TAC VT-6072 Manual

V-TAC Lys VT-6072

Læs gratis den danske manual til V-TAC VT-6072 (15 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om V-TAC VT-6072, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

TECHNICAL DATA

PACKING

WEEE Number : 80133970

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT

OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

MODEL VT-6072

216392,216393,216394 216265,216309,216310216263,216273,216264216262,216272

VT-9077 VT-1277 VT-1577

WATTS

SKU

9W 14W 18W 20W

LUMENS 850LM@Sphere360° 1400LM@Sphere360° 1850LM@Sphere360° 2100LM@Sphere360°

DF >0.5 >0.7 >0.7 >0.7

CRI >80 >80 >80 >80

BEAM ANGLE 160° 160° 160° 160°

BODY TYPE PlasticPlastic

PlasticPlastic

HOLDER

IP RATING

G13 G13 G13

G13

IP20 IP20 IP20 IP20

ON/OFF CYCLE >15,000>15,000>15,000

>15,000

LONG LIFE 25,000 Hours

25,000 Hours 25,000 Hours 25,000 Hours

DIMENSION 28x1500mm28x1200mm28x900mm28x600mm

INPUT POWER AC: 220-240V,50Hz AC: 220-240V,50Hz AC: 220-240V,50Hz AC: 220-240V,50Hz

T8 LED TUBES

INSTRUCTION MANUAL

This marking indicates that this

product should not be disposed of

with other household wastes.

Caution, risk of electric shock.

LED Tube (1PC)

MANUAL

Dummy

Starter (1PC)

Instruction

Manual (1PC)

STARTER

FOR LED TUBES

DUMMY STARTER

INCLUDED

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully

before starting the installing and keep this manual handy for future reference. If you have any another query, please contact

our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.

The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect

installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect

removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24

Hours a day would void the warranty. This product is warranted for manufacturing defects only. The LED tube can be

used in hotels, oces, factories, conference rooms, meeting rooms, commercial complexes, residential buildings, schools,

colleges, universities, hospitals, etc.

• Installation should only be done by a certiﬁed electrician

• Operation environment temperature: from -20°C to +45°C

• Do not use DC electricity

• Do not modify the ﬁtting to be used with the LED Tube.

• V-TAC LED Tubes are NOT designed to be used in emergency operations.

• For Indoor use only.

• Do NOT use with electronic ballasts. V-TAC LED tubes are not compatible with electronic ballast circuit. In order to

use the electronic ballast ﬁtting you must ensure to remove the electronic ballast from the ﬁtting and rewire the

circuit as per new ﬁtting installation as shown below. Ensure the installation and wiring is carried out by certiﬁed

electrician.

INTRODUCTION & WARRANTY

WARNINGS

INSTALLATION & REPLACEMENT OF FLUORESCENT LAMP

(SINGLE MAGNETIC BALLAST CIRUIT)

NEW FITTING INSTALLATION

Single Side Power Only

WIRING DIAGRAM

1. o the power Switch 2. Remove the existing

ﬂuorescent lamp

3. Remove the existing

ﬂuorescent starter

4. Insert LED T8 starter 6. Switch ON the power5. Insert V-TAC LED Tube

LED

Le RightLED TUBE

Inductance Ballast

LED Starter

Le Right

(L)

(N)

V-TAC

INPUT

V-TAC

INPUT

LED TUBE

INSTALLATION INSTRUCTION

AC:220-240V

50Hz

AC:220-240V

50Hz

• Installation should only be done by a

certiﬁed electrician.

• Please refer to the wiring diagram for replacing

ﬂuorescent tube on a single magnetic ballast circuit

with V-TAC LED Tube.

• Installation should only be done by a certiﬁed

electrician

• Switch O the power.

• Ensure the wiring diagram is followed as highlighted.

• Insert V-TAC LED Tube.

• Switch On the power to test the light.

Produkt Specifikationer

Mærke:	V-TAC
Kategori:	Lys
Model:	VT-6072
Vekselstrømsindgangsspænding:	220-240 V
Vekselstrømsindgangsfrekvens:	50 Hz
Vægt:	120 g
Antal pr. pakke:	1 stk
Driftstemperatur (T-T):	-20 - 45 °C
Certificering:	IP20\nCE, EMC
Diameter:	27.9 mm
Pæreeffekt:	10 W
Farvetemperatur:	3000 K
Bæredygtighedscertifikater:	RoHS
Indgangsspænding:	220 - 240 V
Lysstrøm:	850 lm
Strålevinkel:	160 °
Pære levetid:	30000 t
Længde:	600 mm
Ingen tungmetaller:	Hg (mercury), Pb (lead)
Indgangsfrekvens:	50 Hz
Pæreform:	Rør
Pasform/dække type:	G13
Antal tændings/sluknings cyklusser:	15000
Strøm faktor:	0.5
Ækvivalent pæreeffekt:	18 W
Farve-gengivelse (CRI):	80