V-TAC VT-66 Manual

V-TAC Lys VT-66

Læs gratis den danske manual til V-TAC VT-66 (15 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om V-TAC VT-66, eller vil du spørge andre brugere om produktet?

Side 1/15
WEEE Number: 80133970
INSTALLATION INSTRUCTION
LED SOLAR LIGHT
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
WARNING!
1. The light source of this luminaire is not replaceable;
when the light source reaches its end of life the whole
luminaire shall be replaced.
2. Installation should be done by certified electrician.
This marking indicates
that this product should
not be disposed of with
other household wastes
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please
read these instructions carefully before starting the installation and keep this manual
handy for future reference. If you have any another query, please contact our dealer or
local vendor from whom you have purchased the product. They are trained and ready
to serve you at the best.The warranty is valid for 3 years from the date of purchase.
The warranty does not apply to damage caused by incorrect installation or abnormal
wear and tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product.
3
YEARS
WARRANTY
*
TECHNICAL SPECIFICATIONS
MODEL VT-66
WATTS 2W
LUMENS 280LM
BEAM ANGLE 120
CRI >80
IP RATING IP65
SOLAR LIGHT
EN
INSTALLATION DIAGRAM
I. Ground installation instructions:
1. After confirming the installation position, fix the
grounding support with screws. As shown in
Figure 1.
2. Install the lamp onto the bracket and tighten
the
screw with a six-legged wrench. As shown in
Figure 2 & 3.
II. Surface mounted installation instructions:
1. Choose the appropriate installation position and
fix the installation bracket with screws. Picture 1.
2. Install the lamp on the mounting bracket and
tighten the screw by hand with a six-legged
wrench.
Switch Function:
- Press and hold the button for 2-3 seconds to
switch ON the solar light. Once switched ON it will
indicate a blue light.
- When switching on the solar light by default it
will be in Mode 1.
- To enter Mode 2, press the button again.
- Pressing the button for the third time the solar
light will switch OFF and the blue light will
disappear.
Operating Modes:
Mode 1: Sensor Mode.
- At dusk, it automatically turns to 10% brightness.
- Turns on to 100% brightness when motion is detected in the range of <5 meters.
- In 30 seconds if no motion is detected the light switches to 10% brightness.
- Turns off at the dawn.
Mode 2: Constant Brightness Mode.
- The sensor will be disabled.
- Automatically turns on at the dusk with 100% brightness and works constantly till the battery
capacity goes to Zero. (Upto 4 hours).


Produkt Specifikationer

Mærke: V-TAC
Kategori: Lys
Model: VT-66

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-66 stil et spørgsmål nedenfor, og andre brugere vil svare dig