V-TAC VT-767-7 Manual

V-TAC Lys VT-767-7

Læs gratis den danske manual til V-TAC VT-767-7 (4 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om V-TAC VT-767-7, eller vil du spørge andre brugere om produktet?

Side 1/4
1. Please use the card to measure hole position correctly and
drill 3 holes.
2. Fix 3 expansion plugs into the holes.
3.
F
ix 3 screws into the explansion plugs with a spare space.
4.
I
nsert the notch to the lower screw and fasten the whole lamp well.
5.
ess the back button to adjust to the demanded working mode.
WEEE Number:80133970
10m
6
m
6
m
Installation
height
Mode A: Automatically turns on at
the dusk (<30lux) and remains 20%
bright,up to 5 hours after which it
turns off.
Mode B: Automatically turns on to
full brightness (800lm) when motion
is detected in the range ≤6 mtrs and
then tums to 3% brightness in 20
seconds of no motion.
Mode C: Automatically tums on to
full brightness (800lm) when motion
is detected in the range ≤6 mtrs
and then turns off in 30 seconds of
no motion.
Pls press the Button to adjust to different working mode:
Press 1st time for Mode A.
Press 2nd time for Mode B.
Press 3rd time for Mode C. Press 4th time for off.
Installation Height
Detection Area
≤4m


Produkt Specifikationer

Mærke: V-TAC
Kategori: Lys
Model: VT-767-7

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-767-7 stil et spørgsmål nedenfor, og andre brugere vil svare dig