V-TAC VT-8350CCT Manual

V-TAC Lys VT-8350CCT

Læs gratis den danske manual til V-TAC VT-8350CCT (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11 anmeldelser. Har du et spørgsmål om V-TAC VT-8350CCT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully

before starting the installation and keep this manual handy for future reference. If you have any another query, please

contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at

the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by

incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to

incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of prod-

uct for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

Non-replaceable light source Non-replaceable control gear

AC:220~240V, 50Hz

-20°C to +40°C

10%~95%

4300/4800 6000 7200

365±5g 450±5g 525±5g

INPUT VOLTAGE

OPERATING TEMPERATURE

OPERATING HUMIDITY

LUMINOUS EFFICIANCY

[LUMENS@SPHERE 360°]

NET WEIGHT

D1(mm) D2(mm) L1(mm)DIMENSIONS

26±1 1166±276±1

40W

26±1 1466±276±1

50W

26±1 1800±276±1

60W

INSTRUCTION MANUAL

LED PRISMATIC FITTING

TECHNICAL DATA

MODEL VT-8340CCT VT-8350CCT VT-8360CCT

Plastic PlasticPlastic

>0.9

>80

120°

25,000 Hours

>15,000 Times

>0.9 >0.9

40W 50W 60W

SKU

WATTS

BODY TYPE

CRI

BEAM ANGLE

LIFE SPAN

ON/OFF CYCLE

IP RATING IP20

23680 23681 23682

MULTI-LANGUAGE

MANUAL QR CODE

Please scan the QR code

to access the manual in

multiple languages.

SUPER BRIGHT

LM/WATT EFFICIENCY

120+

INSTALLATION INSTRUCTIONS

INSTALLATION DIAGRAM

1.Please make sure to turn o the power before starting the installation.

2.Choose the right position, drill two hole and insert the screw (make sure the

distance between the holes is no less than 50mm, Less than bracket length).

3. Shrapnel point it at the hole and then install the screws(Three installation buckles

can be ﬁxed according to the actual situation for lengths of 1.5M and above).

4.Connect the wires.

5.There is a button at one end of the lamp for colour temperature selection(3000K,

4000K and 6500K).

6. Press the lamp body ﬁrmly into the mounting buckle to ﬁx the lamp body, Slide the lamp body along the mounting

buckle to the desired position as needed.

7. Turn the power ON and test.

WARNING

2. Installation must be performed by a qualiﬁed electrician.

1. Please make sure to turn o the power before starting the installation.

5. For Indoor use only

6. Before installation, you must carefully check the integrity of the product and accessories

7. When installed, products and ﬂammable materials to ensure that at least 0.2m distance, lighting cannot be

installed in the zenith or heat wall, pay attention to low voltage and high voltage electrical wiring separately.

8. To ensure that the power cord has enough length, do not kink cables. Output cables should be laid separately

and at a distance from other cables.

Caution, risk of electric shock.

This marking indicates that this

product should not be disposed

of with other household wastes.

Note: Replace cable spec" H03VVH2-F 2X0.75mm² ", should be replaced by a qualiﬁed technician.

220V 50HZ

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU

FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.

V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

Figure 1 Figure 2 Figure 3

Figure 4 Figure 5 Figure 6

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole

luminaire shall be replaced.

The external ﬂexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall

be destroyed.

Produkt Specifikationer

Mærke:	V-TAC
Kategori:	Lys
Model:	VT-8350CCT

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-8350CCT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys V-TAC Manualer

V-TAC VT-44107CCT Manual

7 Juni 2025

V-TAC VT-4140 Manual

6 Juni 2025

V-TAC VT-17018 Manual

6 Juni 2025

V-TAC VT-995 Manual

7 April 2025

V-TAC VT-415 Manual

4 April 2025

V-TAC VT-407 Manual

4 April 2025

V-TAC VT-22032 Manual

7 Marts 2025

V-TAC VT-5192S Manual

7 Marts 2025

V-TAC VT-409 CCT Manual

6 Marts 2025

V-TAC VT-20123 Manual

4 Marts 2025

Lys Manualer

Nyeste Lys Manualer

Biltema 48-542 Manual

18 Juni 2025

Emos ZGG010P Manual

18 Juni 2025

Emos ZGE044L Manual

18 Juni 2025

Eurolite LED SLS-12 HCL MK2 Manual

18 Juni 2025

Emos ZGH010P Manual

18 Juni 2025

Emos ZGC010P Manual

18 Juni 2025

Emos ZGJ0F4S Manual

18 Juni 2025

Eurolite LED Pixel Matrix Bar 10 RGB/WW Manual

18 Juni 2025

Eurolite LED TMH-S60 Manual

18 Juni 2025

Eurolite PAR-56 Spot CDM150 Manual

18 Juni 2025