SOLAR LED WALL LIGHT (VT-982)
This marking indicates that this product should
not be disposed of with other household wastes.
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best.The warranty is valid for 3 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the product. This
product is warranted for manufacturing defects only.!
1. Installation must be performed by a qualified person.
2. The light source of this luminaire is not replaceable, when the light source reaches its end of life
the whole luminaire should be replaced.
3. Replace any cracked protective shield.
4. Don't immerse in the water
5. Luminaire cannot be installed in low-lying areas, so as not to soak.
1. Drill the holes in the wall.
2. Dig the plastic into the hole.
3. Fix the wall plate onto the wall.
4. Fix the lamp body on the plate and tighten the screws
Press 1st time: to change the light into Warm White or Manually switch on the light
Press 2nd time: to change that color into White
Press 3rd time: to change the color into Day White
Press 4th time: to switch off the light
• At the dusk, automatically turn on the light to 100% brightness. (up to 12 hours)
• At the dawn, light will automacally turns off
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
AC: 3.7V, 2200mAh, 18650 Li
Non-replaceable light source
