V-TAC VT-995 Manual

V-TAC Lys VT-995

Læs gratis den danske manual til V-TAC VT-995 (4 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om V-TAC VT-995, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
LED EMERGENCY EXIT LIGHT
BATTERY REPLACEMENT
BATTERY REPLACEMENT DIAGRAM
TECHNICAL DATA
INTRODUCTION & WARRANTY
WARNING:
• Please make sure to turn off the power before starting the installation.
• The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole
luminaire shall be replaced.
• Installation should only be done by a certified electrician.
• For Indoor Use only
• The device must be connected to the main power supply through a fuse dependent by the total amount of the
line’s power load.
• Installation should be carried out in accordance with the latest edition of the wiring regulations and taking into
consideration the latest building regulations.
• Ensure there is adequate free air circulation of at least 100mm around the luminaire. It is the installer’s
responsibility to consider fire risk and take appropriate precautions.
• This luminaire is intended only for mounting in locations where the plug and socket are protected from
unautorized disconnection
INSTALLATION DIAGRAM
LUMINAIRE INDICATOR
MANUAL & SELF-TEST LOGIC
MAINTENANCE INFORMATION
LABELING INFORMATION
SURFACE INSTALLATION
WALL MOUNTING INSTALLATION
HANGING INSTALLATION
INSTALLATION INSTRUCTIONS
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, risk of electric shock.
Model VT-995
WATT
SKU 7675
S 2.5W
NO. OF LED 20 SMD LEDs
LUMENS 100LM
BATTERY TYPE Ni-Cd AA 3.6V, 0.6Ah
EMERGENCY OPERATION TIME >3 Hours (Maintained)
BATTERY DISCHARGE CURRENT 150mA
BATTERY CHARGING CURRENT 60mA
RECHARGING 24 HOURS
VIEWING DISTANCE 30 METERS FROM BOTH SIDE
OPERATION TEMPERATURE
INPUT POWER AC:220-240V, 50/60Hz
STIC
BODY TYPE PC+PMMA
KER
4 WAY LEGENDS AVAILABLE
MAIN & CHARGING INDICATOR GREEN LIGHT
LAMP TYPE EXIT LAMP
0 to +45°C
DIMENSION 350x195x29mm
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V AC.EU-T
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
1. Switch off the power before starting the installation.
2. Place the right pictogram with plastic mounting bolts.
3. Open the cable input cabinet
4. Connect the main power supply cable to driver.
5. Close the cable input cabinet
6. Connect the ideal accessory to the luminaire and fasten it ideally as shown ab e installation.ov
7. Switch on the power
The replacement can be done only by a qualified electrician.
1. Turn off the main power supply.
2. Remove the PMMA by punching the hooks.
3. Release 3 pieces screws.
4. Remove the cover.
5. Disconnect the old battery plug and remove it.
6. Insert the new battery in the same way as the old battery.
7. Close the cover and install the PMMA.
1. Manual Test: Press the test button, the green charge and main power supply indicator must be off and the
emergency function activated.
2. Monthly Self-test: Press the test button for 5 seconds or it will activate automatically every 30 days after
installation. The green charge indicator will flash once every second for 128 seconds. If the battery charge
and the LED do not h e a problem, the luminaire will return to normal operation after the test.av
3. Annual Self-test: Press the test button for 7 seconds or it will activate automatically every 365 days after
installation. The green charge indicator will flash twice every second for 3 hours. If the battery charge, LED
and durability test do not present a problem, the luminaire will return to normal operation after the test.
4. Battery circuit self-test: the luminaire constantly check the battery circuit. If the battery circuit is not
found to be normal, the red error indicator will flash once every second until the battery is replaced.
If the ab e sequence did not apply then the battery will discharge on a certain limit until the battery protection ov
operation starts.
Minimum recommended test schedule:
• Daily: check that the green indicators is active and the red error indicator is inactive.
• Monthly: check that the green indicators is active and the red error indicator is inactive
(After the monthly self-test).
• Annually: check that the green indicators is active and the red error indicator is inactive
(After the monthly self-test).
ΝΟΤΕ: If red error indicator is activated after any of the ab e or if the luminaire does not work as described in ov
this document, contact the installer.
PARTS:
• The luminaire contains no user replaceable components other than the battery pack contained in emergency
versions.
BATTERY:
• It is operated and maintained by regular tests, as described in detail in this document.
• The battery must be replaced in case it cannot support the minimum duration autonomy of 3 hours.
Suspension of product operation: in case of not using the product for a period of the installer must execute the
following steps:
1. Disconnect the main power supply.
2. Press the test button one time.
3. After button is pressed the LED will stop emitting and the operation of battery protection will start.
X: Self-contained
1: Maintained
A: Including test device
F: Automatic test gear complying
with IEC 61347-2-7 denoted EL-T
G: Internally illuminated safety sign
180: 180 minutes duration
SKU: 11362
REMOTE CONTROLLER
(NOT INCLUDED)
②
④
⑤
③
③③
2
3
4
7
PACKAGE LIST
EMERGENCY LUMINAIRE DESIGNATION
X1A F G 180
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any anoth-
er query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. This product
is warranted for manufacturing defects only.
PAP
20
Installed By: . .....................................
Installed Date: ......................... .....
Luminaire No.: ...................................
Luminaire Loca n: . ..........................
Contact Details: .................................
Month Test
1st Year 2nd Year 3rd Year 4th Year 5th Year
Signed Date Signed Date Signed Date Signed Date Signed Date
1func onality
2func onality
3func onality
4func onality
5func onality
6func onality
7func onality
8func onality
9func onality
10 func onality
11 func onality
12 func onality
Quality control table

Produkt Specifikationer

Mærke: V-TAC
Kategori: Lys
Model: VT-995

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-995 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lys V-TAC Manualer

V-TAC

V-TAC VT-767-7 Manual

21 Juli 2025
V-TAC

V-TAC VT-982 Manual

20 Juli 2025
V-TAC

V-TAC VT-908D Manual

19 Juli 2025
V-TAC

V-TAC VT-105ST Manual

19 Juli 2025
V-TAC

V-TAC VT-42024 Manual

9 Juli 2025
V-TAC

V-TAC VT-17012 Manual

9 Juli 2025
V-TAC

V-TAC VT-41009 Manual

21 Juni 2025
V-TAC

V-TAC VT-44107CCT Manual

7 Juni 2025
V-TAC

V-TAC VT-4140 Manual

6 Juni 2025
V-TAC

V-TAC VT-17018 Manual

6 Juni 2025

Lys Manualer

Nyeste Lys Manualer

Cotech

Cotech SP-LS3M120GR-01B Manual

1 August 2025
Zhiyun

Zhiyun FIVERAY M20C Manual

1 August 2025
Cotech

Cotech K-NCF-LN10W Manual

1 August 2025
Godox

Godox LA200R Manual

1 August 2025
Cotech

Cotech A60I-047M0-027 Manual

1 August 2025
Cotech

Cotech FIB75600v1-pt Manual

1 August 2025
Godox

Godox LA150R Manual

1 August 2025
Godox

Godox SL300II Manual

1 August 2025
Emos

Emos ZM6155 Manual

1 August 2025
RYOBI

RYOBI RML4 Manual

1 August 2025