1. Rod Connections:
a. Thread the fixture wire from the fixture through the lower rod, then
secure the lower rod onto fixture using the threaded pipe.
b. Thread the fixture wire through the middle rod, and then secure the
middle rod onto the lower rod using the threaded pipe.
c. Thread the fixture wire through the upper rod, and then secure the
upper rod onto the middle rod using the threaded pipe.
Note: Length adjustable from 23" to 56". Use fewer rods if shorter
length is desired.
2. Take a quick link, open the locking tube, then hook it onto the loop
of canopy and the loop (E) of upper rod. Close back the locking tube
of the quick link.
3.
Thread the fixture wire through the canopy kit, then secure the rod
assembly to the set threaded pipe of the canopy kit.
4.
Attach the
mounting strap unit (A)
to outlet box by using two mounting
screws
(B)
.
5. Pull out the source wires from the outlet box. Make wire connections
using wire connectors (C) as follows:
---Connect the smooth-coated wire (marked) from the fixture to the
black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the
white wire from the power source.
---Attach the fixture ground wire to the mounting strap unit (A)
with the green ground screw, then connect it to the
house ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.
6. Attach the canopy kit to the mounting strap unit (A)
by inserting the fixture mounting screws, then
secure it with two bolt nuts (D).
7. Unscrew the three set screws. Put the glass
shade into fixture carefully, then secure it with
the two set screws and turn the glass shade
clockwise to secure the set screws.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save this instructions.
P0431 / P0432
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Turn off the power at fuse or circuit box.
Installation Steps
Bolt Nut (D) Loop (E)
Mounting Screw (B)
Mounting Strap Unit (A)
Wire Connector (C)
Page 1 / 2
Set Screw
Canopy Kit
Outlet Box
House Ground Wire
Wire Connector (C)
Lock Nut
Mounting Strap (A)
Green Ground Screw
Mounting Screw (B)
Fixture Wire
Fixture Mounting Screw
Fixture Ground Wire
Bolt Nut (D)
Quick Link
Loop (E)
Loop (E)
Upper Rod
Threaded Pipe
Threaded Pipe
Middle Rod
Threaded Pipe
Middle Rod
Low Rod
Threaded Pipe
Threaded Pipe
Socket
Fixture
Glass Shade
Max. 60W Medium Base
Bulb (not included)
241029
