Vaxcel P0138 Manual

Vaxcel Lys P0138

Læs gratis den danske manual til Vaxcel P0138 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vaxcel P0138, eller vil du spørge andre brugere om produktet?

Side 1/2
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
Loop
Canopy (D)
Collar (E)
Quick Link (F)
Quick Link (F)
Chain (G)
Fixture
Pure Shell (H)
Socket
Max. 60W Type A Bulb
(not included)
Installation Steps
1. Cut the "H" plastic buckles with scissor when take down
the PE bags. (See Fig.1)
2. Attach the mounting strap unit (A) to the ceiling box by
using two mounting screws (B).
3. Adjust the length of the chain (G) you needed, then
weave the fixture wire and the fixture ground wire
through the chain (G), collar (E) and canopy (D).
4. Connect one end of the chain (G) with the loop by
using a quick link (F).
5. Connect the other end of the chain (G) with the top
loop by using another quick link (F).
Pure Shell (H)
PE Bag
Scissor
"H" Plastic Buckle
Fig.1
Turn off the power at fuse or circuit box.
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save this instruction.
P0138
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Mounting Strap Unit (A) Wire Connector (C)
Collar (E)
Mounting Screw (B)
Canopy (D)
Quick Link (F)
Chain (G)
Pure Shell (H) Fishing Line (I)
X 1M
Outlet Box
Housing Ground Wire
Wire Connector (C)
Fixture Wire
Fixture Ground Wire
Mounting Strap Unit (A)
Green Ground Screw
Mounting Screw (B)
Threaded Pipe
Hex Nut
Washer
Top Loop
Page 1 / 2
231219


Produkt Specifikationer

Mærke: Vaxcel
Kategori: Lys
Model: P0138

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel P0138 stil et spørgsmål nedenfor, og andre brugere vil svare dig