Velleman KSR6 Manual


Læs gratis den danske manual til Velleman KSR6 (19 sider) i kategorien Legetøj. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Velleman KSR6, eller vil du spørge andre brugere om produktet?

Side 1/19
KSR6 – "LADYBUG" ROBOT KIT
1. Introduction & Characteristics
Thank you for buying the KSR6! Read this manual carefully before bringing the device into use.
The KSR6 uses infrared emitting diodes as "eyes" to avoid obstacles in its path. The Ladybug automatically makes a
left turn when it detects an object. It continues to move forward as long as there's no detection.
The Kit comes complete with 2 sets of differently designed legs, which move in their own distinct way. Fun and
excitement are guaranteed.
The KSR6 requires four 1.5Vdc AAA-batteries (not included).
Apart from the batteries, y rs, a soldering iron, a diagonal cutter, a ou will also need a pair of long-nose plie
screwdriver, a soldering iron and a length of solder wire.
2. Electronic Parts List Fig. 1
1. resistor: 1x 10 (brown/black/black/gold)
2x 15 (brown/green/black/gold)
2x 100 (brown/black/brown/gold)
1x 1K (brown/black/red/gold)
4x 4K7 (yellow/purple/red/gold)
3x 10K (brown/black/orange/gold)
3x 120K (brown/red/yellow/gold)
1x 1.8M (brown/grey/green/gold)
2. ceramic capacitor: 1x type 331, 4x type 104
3. electrolytic capacitor: 1x 4.7µf, 2x 100µf
4. IR emitting diode 5mm, clear (1x)
5. photo transistor, black (1x)
6. black tube (1x)
7. diode 1N4148 (1x)
8. pin header 4 pins (1x)
9. female pin header 4 pins (1x)
10. transistor: 3x C945, 1x A733, 2x 8050, 2x 8550
11. LED holder (2x)
12. IC: 1x type LM324 (14 pins)
13. IC socket 14 pins (1x)
14. battery connector (1x)
15. pin (4x)
16. variable resistor 50K (1x)
17. slide switch (1x)
18. connector with wire: 1 x yellow, 1 x green,
1 x orange, 1 x blue
19. battery holder (1x)
20. PCB (1x)
3. Mechanical Parts List
1. 2x screw 3x6mm (P13)
Fig. 2
2. 9x screw 3x6mm (P14)
3. 3x nut M3 (P15)
4. 4x hex post 10mm (P16)
5. 1x body (P17)
6. 2x antenna (P18)
KSR6 1 VELLEMAN
4. Assembly
a) PCB Assembly
Start the assembly by mounting the resistors. The names of all components have been printed on the PCB:
Part ID Description Colour Code Quantity
R11 10 brown/black/black/gold 1
R12/17 15 brown/green/black/gold 2
R13/16 100 brown/black/brown/gold 2
R1 1K brown/black/red/gold 1
R4/9/10/15 4K7 yellow/purple/red/gold 4
R2/3/5 120K brown/red/yellow/gold 3
R6~8 10K brown/black/orange/gold 3
R14 1.8M brown/grey/green/gold 1
Mount the capacitors, the transistors and the diode next:
Part ID Description Quant.
C1 ceramic capacitor 331 1
C2/3 ceramic capacitor 104 2
EC3 electrolytic capacitor 0.47µf 1
EC1/2 electrolytic capacitor 100µf 2
Q1/2/7 transistor C945 3
Q8 transistor A733 1
Q4/5 transistor 8050 2
Q3/6 transistor 8550 2
D1 diode 1N4148 1
Mount the IC socket, the battery connector, the slide switch, the variable resistor, the pins, the IC and the pin header.
Part ID Description Quant.
IC1 IC socket (fig.1 #13) 1
BAT. battery connector (fig.1 #14) 1
SW. slide switch (fig.1 #17) 1
VR1 variable resistor (fig.1 #16) 1
M1 (+/-)
M2 (+/-) pins (fig.1 #15) 4
IC1 type LM324
1
To IR_PCB pin header (fig. 1 #8)
1
Mount the IR emitting diode, the photo transistor and the female header:
Part ID Description Quantity
TX_IR IR emitting diode (fig. 1 #4) 1
RX_IR photo transistor (fig. 1 #5) 1
From Main_Board female header (fig. 1 #9) 1
Fig. 3a
Fig. 3b
KSR6 2 VELLEMAN


Produkt Specifikationer

Mærke: Velleman
Kategori: Legetøj
Model: KSR6
Bredde: 120 mm
Dybde: 150 mm
Højde: 85 mm
Produktfarve: Black,Grey,Transparent

Har du brug for hjælp?

Hvis du har brug for hjælp til Velleman KSR6 stil et spørgsmål nedenfor, og andre brugere vil svare dig