Xiaomi Yeelight Sunflower Manual

Xiaomi Lettelse Yeelight Sunflower

Læs gratis den danske manual til Xiaomi Yeelight Sunflower (3 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Xiaomi Yeelight Sunflower, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Yeelight Sunower

User manual (English)

1/ 3

Ver: -1 SF

Yeelight sunower is a wireless, smart, scene lighng system. It can be installed into your home -Fi network, Wi

and all the bulbs form system with control box automaticallya . You may control the bulb to change their color

and brightness with smart device such smart phone or pad, also you may save the seng to a scene and recall as

it at next me Now the app supports iOS version 5.0+ and Android 2.3.3+. .

1. Starter pack

For the starter pack, there are 3 yeelight bulbs and 1 control box; it the base lighting system. is

1) T bulb he

The yeelight sunower bulb is a LED lighting bulb, in which there is a wireless sending/receiving component

working via Zigbee signal The bulb receives signals from s. control box changes color and brightness to what and

you want.

2) Control box

The control box is a LAN (local area network) to Zigbee bridge, which transforms the smart phone control

commands (Wi-Fi signals) to Zigbee signals. The Control box has one LAN socket, with which it can be connected

to your home Wi-Fi AP. When it boots up, an IP address will be assigned and your smart phone can search and

connect to it via Wi-Fi. The following gure shows the interfaces on control box.

2. Single pack

For the single , there is only one yeelight bulb in the package The single pack cannot be used independently, pack .

and it should be used to extend bulb number for a starter pack. Please refer to Extra bulb via single pack in

Installaon secon on how to extend.

LED inside

Wireless antennae area

Cap

Light diusing dome

Wireless indicator

LAN indicator

LAN interface

Power interface

Button

Introducon

Yeelight Sunower

User manual (English)

2/ 3

Ver: -1 SF

Aer you install all the components system is running, a wireless binding between the bulb and control box and

is created. In this manual, there are also operaons for you to unbind them.

1. Preparaon

1) There is a home Wi-Fi AP and your smart phone can connect to it;

2) Check the accessories, including LAN cable, an USB power cable and an USB power adapter.

2. Starter pack

1) Plug LAN cable into LAN interface of your Wi-Fi AP, and plug another end into control box;

2) Plug in the power cable.

The LAN indicator on control box will fast ash for several mes during network conguraon, then slow ash for

several mes during boong. When it boots up, the LAN indicator always on. During your control from smart is

phone, it will ash 3 mes when it gets a command.

3) Screw the bulb into mount base, then turn on the power.

When bulb is turned on, and it transmits messages with control box, the wireless indicator on control box will

show on.

3. Extra bulb via single pack

Screw the bulb into mount base, then turn on the power. Refresh the list on smart phone, it will show new

discovered bulbs.

If you have problems when install extra bulbs, especially when you get them from other control, try to restore

bulb to factory setng, or put them closer to control box to get better wireless signal. About restoring to factory

seing, see the operaon in advanced operation secon.

4. Advanced operaon

1) Restore control box to factory setng

Press down the buon on control box and hold it for 10 seconds, then release , both the LAN indicator and it

wireless indicator will fast ash for about 3 seconds. When all the 2 indicator LEDs shows on, the operaon is done.

The restore operaon will clean the bind info on control box, so the bulb list will be swept, you should reinstall

them. If the bulb is online when you do this operaon, it also be restored to factory seng.

2) Restore bulb to factory seng

Keep your bulb on for at least 30s, then turn it off, now you can do the restore operaon as following steps:

i) Turn bulb on, when it’s up and shows maximum white light, turn o immediately (less than 5 seconds);

ii) Repeat above step for 3 mes;

iii) Then turn on the bulb again, you could see bulb shows red/green/blue/white, it means the

Installaon

Produkt Specifikationer

Mærke:	Xiaomi
Kategori:	Lettelse
Model:	Yeelight Sunflower

Har du brug for hjælp?

Hvis du har brug for hjælp til Xiaomi Yeelight Sunflower stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lettelse Xiaomi Manualer

Xiaomi Yeelight Sunflower Manual

17 September 2024

Xiaomi Mi Motion-Activated Night Light Manual

28 Juni 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Schwaiger CALE100 511 Manual

9 April 2025

ADB Orkis Fresnel Manual

8 April 2025

Claypaky Actoris ParLED Manual

8 April 2025

ET2 Waterfall E24846-90 Manual

8 April 2025

Dainolite V166-1W Manual

5 April 2025

Dainolite OFE-161P Manual

5 April 2025

Dainolite DMLED10-A-5D Manual

5 April 2025

Dainolite DM1958F Manual

5 April 2025

NUVO Ballerina 60/1265 Manual

4 April 2025

NUVO SF77/196 Manual

4 April 2025