Zvox SB380 SoundBar Manual

Zvox Højttaler SB380 SoundBar

Læs gratis den danske manual til Zvox SB380 SoundBar (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Zvox SB380 SoundBar, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Mute

The MUTE button on the soundbar remote control operates

in the normal manner. When MUTE is active, the display will

show a blinking -00- for 20 seconds.

Bass and Treble

The Bass control has a range of -6 to 4.

The Treble control has a range of -4 to 4.

Note: The bass output of a soundbar system is affected by

its position within a room. You may nd it sounds best with

slightly more or less bass than the neutral setting.

Surround Settings

There are three SURROUND levels:

• Surround One (“Sd 1”) has low virtual surround effect and strong

vocals. Use this setting if vocal clarity is important to you.

• Surround Two (“Sd 2”) has moderate virtual surround effect

and moderate vocals. Most people prefer this setting for most

program material.

• Surround Three (“Sd 3”) has strong virtual surround effect

and moderate vocals. Many people prefer this setting when

watching movies.

Output Leveling

Press this button to prevent large changes in volume. When

engaged, it boosts quiet dialog and lowers the output of loud

commercial breaks. It also reduces volume swings between

cable or satellite channels. This feature can be used along

with any of the three Surround settings.

Accuvoice

Press this button to increase the clarity of most voices.

Pressing Accuvoice overrides the current Surround setting.

A second press returns the soundbar to the last-used

Surround setting.

STILL NEED ASSISTANCE? If your home TV system does

not conform to the descriptions in this guide, don’t hesitate

to send an inquiry to info@zvoxaudio.com or call ZVOX Audio

at (866) 367-9869. Please provide your TV brand and model

number. A ZVOX Audio representative should be available

(Eastern Time Zone) 9:30 AM to 7:30 PM Monday through Friday.

4a. Controlling the ZVOX Soundbar

Using Your Preferred Remote Control:

Your preferred TV remote control can control Volume,

Mute and Power on the ZVOX soundbar. See the

separate instruction sheet that describes the process

of teaching the ZVOX to respond to these commands.

The ZVOX soundbar remote will always provide a full

range of adjustments, along with your preferred remote.

Button functions on the soundbar

remote control

Volume

The VOLUME buttons operate in the normal manner

Power (STANDBY)

The Power button toggles the soundbar between

STANDBY and On. Note: A soundbar automatically enters

STANDBY if it is silent for longer than approximately 30

minutes. A soundbar will turn back on when it senses a

restored digital signal

(Input 1 only) or an infrared power or volume adjustment.

Input Selection:

A brief press and release of the INPUT button on the sound-

bar remote control allows you to select between the four

separate inputs on the soundbar.

Input 1—digital

Input 2—digital

Input 2—analog (RCA jacks)

Bass set at -2

Treble set at 1

Mute

MUTE VOLUME INPUT

Setup & Operation

ZVOX Audio SB380 Soundbar

Don’t Worry It’s Pretty Easy.

What’s In The Box

Soundbar • Remote control • Instruction sheets

AC power cord with integral power supply • Optical Digital and Analog signal cables

(866) 367-9869 | info@zvoxaudio.com

Position The System.

STEP 1

STEP 2

STEP 3

STEP 4

Connect One Signal Cable.

Connect the Power cable.

Use the Soundbar remote to

turn on power and adjust volume.

Home Theater

Made Simple!

6. Soundbar Wall Mounting Information

Dimensioned diagrams of each ZVOX Audio soundbar model can be found on

ZVOX Audio's website.

The soundbar has two keyhole mounting sites on its back panel. You can mount the

soundbar onto two screwheads using these mounting sites. A ZVOX Audio soundbar

weighs between 15 and 20 pounds. NOTE: It is the installer’s responsibility to ensure

the screws are installed into the wall or other surface securely and that the screwheads

are the correct size for the hanger mounts on the rear of the soundbar. ZVOX Audio

recommends your mounting sites be able to support at least twice the weight of

the soundbar.

4b. End Panel Controls

on the Soundbar

On the viewer’s right end of the soundbar

are four buttons.

A) POWER button:

This button turns the soundbar “ON” if it is in

Standby. If this button pressed briey while

the soundbar is “ON”, it will mute and un-

mute the soundbar. To turn off the soundbar,

press and hold down this button for about

ve seconds.

B) Volume Up/Down rocker button

Adjusts volume up and down. Pressing

either side of this button will “unmute” the

speaker if it is muted.

C) Input button:

A brief press and release of the INPUT

button selects the next input in sequence.

5. Tonal Prole Setting

The soundbar has three settings to better match

the acoustics of its room position.

Face Front ........ PS16 - on a at surface, facing front.

Face Up ............ PS17 - on a at surface, facing up.

Wall mount ....... PS18 - on a vertical surface,

facing into the room.

The default setting for the soundbar is Face Front.

If your soundbar’s position is Face Up or

Wall mount, you should select PS17 or PS18

from the PS menu.

PS Menu: you bring up the PS menu by pressing down

on two buttons on the end panel of the soundbar:

Power ( ) and Volume Up (+). After about ve to seven

seconds you should see PS start ashing. The rst time

you bring up the PS menu, it should show “PS 0”.

Once you see the PS display, release the buttons. Then press and release the Volume Up button

to increase the PS number. Continue pressing and releasing the Volume Up button until you

reach the setting you want: PS16, PS17 or PS18.

For further information about the options provided by the PS menu, see the separate information

sheet Soundbar Adjustment Options, available online at ZVOX Audio's website.

Face Front Face Up Wall Mount

Produkt Specifikationer

Mærke:	Zvox
Kategori:	Højttaler
Model:	SB380 SoundBar

Har du brug for hjælp?

Hvis du har brug for hjælp til Zvox SB380 SoundBar stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Zvox Manualer

Zvox SB400 Soundbar Manual

25 August 2024

Zvox AccuVoice AV200 Manual

25 August 2024

Zvox SoundBase 440 Manual

25 August 2024

Zvox ACCUVOICE AV203 Manual

24 August 2024

Zvox SB380 SoundBar Manual

24 August 2024

Zvox Z-Base 555 Manual

24 August 2024

Zvox AccuVoice AV155 Manual

24 August 2024

Zvox SB500 Soundbar Manual

24 August 2024

Zvox 430 HSD Manual

8 August 2024

Zvox 430 Manual

8 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Extron NF 4C LP Manual

20 December 2025

PSB PWM Sat Manual

19 December 2025

Digital Watchdog SiteWatch DWC-SWSPW30iAM Manual

17 December 2025

Artsound AS1600 Manual

17 December 2025

Digital Watchdog SiteWatch DW-SWSPC30iAM Manual

16 December 2025

PSB SubSeries BP7 Manual

16 December 2025

Energy Sistem TempoRave Manual

11 December 2025

RCF C 5215-W MKIII Manual

10 December 2025

RCF X 28 L Manual

10 December 2025

Fostex PM0.4d Manual

8 December 2025