Zvox SoundBase 440 Manual

Zvox Højttaler SoundBase 440

Læs gratis den danske manual til Zvox SoundBase 440 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Zvox SoundBase 440, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Remote Control Capabilities

Volume

The VOLUME buttons on the SoundBase remote control operate in the

normal manner.

Power (STANDBY)

The Power button on the SoundBase remote control toggles the SoundBase

between STANDBY and On. Note: Automatic Standby operation on a

SoundBase is selected as a default. If you wish the SoundBase to turn off

only when you push the POWER button on the “learned” remote control

or the ZVOX remote control, select PS11 on the PS options. Download the

PDF document “SoundBase Adjustment Options” from the SUPPORT page

of the ZVOX Audio website www.zvoxaudio.com.

A SoundBase in STANDBY will automatically turn back on if it senses a

volume, mute or power infrared command from the “learned” remote control

or the SoundBase Remote control.

Mute

The MUTE button on the SoundBase remote control operates in the normal

manner. When MUTE is active, the display will show a blinking -00- for 20

seconds.

Bass and Treble

The Bass control has a range of -6 to 4.

The Treble control has a range of -4 to 4.

Note: The bass output of a SoundBase system is affected by its position

within a room. You may nd it sounds best with slightly more or less bass

than the neutral setting.

Surround Settings

There are three SURROUND levels:

• Surround One (“Sd 1”) has low virtual surround effect and strong vocals.

Use this setting if vocal clarity is important to you.

• Surround Two (“Sd 2”) has moderate virtual surround effect and moderate

vocals. Most people prefer this setting for most program material.

• Surround Three (“Sd 3”) has strong virtual surround effect

and moderate vocals. Many people prefer this setting when watching

movies or sporting events.

Output Leveling

Engage Output Leveling to reduce volume swings between TV programs,

commercials and TV channels. OL appears on the display when Output

Leveling is engaged. Output Leveling boosts quiet dialog a large amount

and reduces output of the loudest commercial breaks. You will need to

use a lower number volume setting when Output Leveling is engaged.

This is normal. This feature can be used along with any of the three

Surround settings.

Accuvoice

Press this button to increase the clarity of most voices.

Pressing Accuvoice overrides the current Surround setting. A second press

returns the SoundBase to the last-used Surround setting.

STILL NEED ASSISTANCE? If your home TV system does not conform to the

descriptions in this guide, don’t hesitate to send an inquiry to info@zvoxaudio.com

or call ZVOX Audio at (866) 367-9869. Please provide your TV brand and model

number. A ZVOX Audio representative should be available (Eastern Time Zone)

Monday through Friday 9:30 AM to 7:30 PM.

4b. SoundBase Front Panel and Rear Panel

4a. Infrared Remote Control Features of the SoundBase

Learning:

You can “teach” the SoundBase to respond to your current TV remote

control for the following functions: Volume, Mute (on/off) and Power (on/

off). See the separate sheet for instructions. After this “learning” process,

you will not need the SoundBase remote control for adjusting Volume,

Mute and Power. Teaching the SoundBase to respond to your preferred

remote does not affect the included SoundBase remote. The SoundBase

remote will still provide its full range of adjustments.

Input Selection:

Pressing the INPUT button allows you to select a different input.

Inputs are selected in the following order:

Input 1—digital (optical or coaxial jack)

Input 2—analog (input 2)

Input 3—analog (input 3)

Bluetooth device (SoundBase 450 and 350 only)

Bass set at -2

Treble set at 1

Mute

MUTE VOLUME INPUT

® ZVOX, SoundBase and AccuVoice are registered trademarks of ZVOX Audio, LLC.

® Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. used under license by ZVOX Audio LLC.

Setup & Operation

ZVOX SoundBase

®450/440/350/330

Don’t Worry It’s Pretty Easy.

What’s in the box

SoundBase system • Remote control • Instruction sheets

AC power cord with external power supply • Optical digital and analog signal cables

(866) 367-9869 | info@zvoxaudio.com

SoundBase Front Panel Control

SoundBase Back Panel Inputs

1 MUTE/Power button. If the system is on, a press of this button toggles MUTE on and

off. Also while the system is on, if you press and hold the MUTE button for longer than

four seconds, the system will enter STANDBY.

2 VOLUME -/+. The volume range indication is 01 to 30.

3 INPUT. Selects between the inputs on the SoundBase (four inputs on the Soundbase 450

and 350, or three inputs on the SoundBase 440 and 330). See 4a Input selection in the

rst column.

5. Digital Audio Troubleshooting

TV sets with no audio output:

You should check the program sources connected to the TV for an audio output (cable box, disc

player, game box). Many cable boxes and DVD/Blu-ray players have both analog and digital audio

outputs. If you connect directly to a set top box and a DVD/Bluray player, you need to switch

inputs on the TV and the SoundBase.

Bluray disc audio:

If you don’t get sound from a Bluray disc, the digital audio on that disc may be encoded using

a proprietary format. In this case, use the Bluray disc menu or the Bluray player menu to select

Dolby Digital or PCM digital output.

Internet streaming HD video audio:

If your TV features a internet connection and displays HD streaming content, it may be

necessary to select Dolby Digital or PCM digital audio in the TV or from the streaming provider’s

sound options. In some cases, it may be necessary to use the TV’s analog audio output to

hear audio from streaming movies. This is the case when a TV’s internal streaming application

cannot limit the digital audio format to PCM or Dolby Digital.

It is possible to eliminate selection of unused inputs on your SoundBase. Download the PDF

document “SoundBase Adjustment Options” from the SUPPORT page of the ZVOX Audio

website www.zvoxaudio.com for further information.

Place the system on furniture.

STEP 1

STEP 2

STEP 3

STEP 4

Connect one signal cable.

Connect the power cable.

Use the SoundBase remote to

select the correct input and volume.

Home Theater

Made Simple!

Produkt Specifikationer

Mærke:	Zvox
Kategori:	Højttaler
Model:	SoundBase 440

Har du brug for hjælp?

Hvis du har brug for hjælp til Zvox SoundBase 440 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Zvox Manualer

Zvox SB400 Soundbar Manual

25 August 2024

Zvox AccuVoice AV200 Manual

25 August 2024

Zvox SoundBase 440 Manual

25 August 2024

Zvox ACCUVOICE AV203 Manual

24 August 2024

Zvox SB380 SoundBar Manual

24 August 2024

Zvox Z-Base 555 Manual

24 August 2024

Zvox AccuVoice AV155 Manual

24 August 2024

Zvox SB500 Soundbar Manual

24 August 2024

Zvox 430 HSD Manual

8 August 2024

Zvox 430 Manual

8 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Victrola Willow VRS-2800 Manual

3 November 2025

Hama Bomb 3.0 00188234 Manual

3 November 2025

Hama Mate Pro MK II 00188231 Manual

3 November 2025

Alpine QLP952SLR-2 Manual

3 November 2025

Hama UltiMate Pro 00188232 Manual

2 November 2025

4smarts SoundForce Manual

2 November 2025

Celestion Pulse 15 Manual

2 November 2025

Earthquake Sound PR-SBT200 Manual

2 November 2025

GEARit GI-SPKR-BT-IN-BK Manual

2 November 2025

Axxion AFB-100 Manual

2 November 2025