Access Lighting Simplicite 50937 Manual

Access Lighting Lys Simplicite 50937

Læs gratis den danske manual til Access Lighting Simplicite 50937 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Access Lighting Simplicite 50937, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
• 1 x 60W E26 A19 bulb
INSTALLATION INSTRUCTIONS
WHAT WE PROVIDE
•
• 10” wire with lamp holder
• 1 x Glass shade
COLLECTION
CERTIFICATION: cULus DRY
NO.
50937
SIMPLICITE
50937
APPLICATION MODEL NO.
Pendant Fixture
IMPORTANT SAFETY INSTRUCTIONS
MESURES DE SECURITE A RESPECTURE
Before assembling your ACCESS LIGHTING fixture, please make sure that
you carefully read through this instruction sheet. Save this instruction sheet
and refer to it when additions to or changes in the fixture
configuration are made.
Lisez attentivement ce manuel d’instructions. Enregistrer cette feuille
d'instructions et de s'y référer lorsque les ajouts ou changements dans
la configuration de montage sont faites.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR.
CONSULTER UN ELECTRICIEN QUALIFIE POUR VOUS ASSURER QUE LES
CONDUCTEURS DE LA DERIVATION SONT ADEQUATS
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONTSTRUCTION
AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
CE PRODUIT DOIT ETRE INSTALLE SELON LE CODE D’INSTALLATION PERTINENT,
PAR UNE PERSONNE QUI CONNAIT BIEN LE PRODUIT ET SON FONCTIONNEMENT
AINSI QUE LES RISQUES INHERENTS
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution and
care, are factors that can’t be built into any product. These factors must
be supplied by the person(s) caring for and operating the fixture.
Read all instructions
Do not install this fixture in hazardous locations.
N'installez pas cet appareil dans des emplacements dangereux.
Do not install any fixture assembly closer than 6 inches from any
curtain or similar combustible material.
Laisser une distance d’au moins 6 pouces entre ce luminaire et la toute
surface combustible.
"WARNING Risk of Fire and Electric Shock."
“CAUTION: Risque d’ Incendie et de Choc Electriques.”
GENERAL INFORMATION
All electrical connections must be in accordance with all ordinances,
Local and the U.S. National Electrical Codes (NEC). These fixtures are
intended for mounting to a standard 4” metal octagon outlet box.
The box must be directly supported by the building structure and U.L.
Recognized.
STEP BY STEP INSTRUCTIONS
Before starting your installation disconnect the Power by turning off the
Circuit Breaker or by removing the fuse at the fuse box. Just turning the
light off at the light switch is not sufficient to prevent electrical shock.
CERTIFICATION: NO. cULus DRY
50937
MOUNT CROSSBAR
If there is an existing fixture remove it.
Install the crossbar and mount it to the J-Box with
the supplied screws.
MAKE WIRE CONNECTION
Put the holder wire through the glass shade, glass
shade top cover and rod and secure the holder wire
nut to the canopy. Expose the supply wires from
the J-box. Gently pull the supply wires through the
hole in the canopy and crossbar plate. Connect the
black supply wire to the black fixture wire. Secure
with the supplied wire nuts. Connect the white supply
wire to the white fixture wire. Secure with the supplied
wire nuts. Attach the green J-Box wire around green
hexagonal head screw or connect it to the green supply
grounding wire of the fixture. Secure all wires with
electrical tape (not supplied). Tuck all wires carefully
into the J-Box.
INSERT THE BULB
Insert the bulb.
MAXIMUM WATTAGE 60W.
DO NOT EXCEED THE MAXIMUM WATTAGE AS
STATED ON THE WARNING LABEL AND
INSTRUCTION SHEET.
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO use bulbs tha NOT t exceed the
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE

Produkt Specifikationer

Mærke: Access Lighting
Kategori: Lys
Model: Simplicite 50937

Har du brug for hjælp?

Hvis du har brug for hjælp til Access Lighting Simplicite 50937 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lys Access Lighting Manualer

Access Lighting

Access Lighting Atom 20725LEDDLP Manual

30 Juni 2025
Access Lighting

Access Lighting Simplicite 50937 Manual

29 Juni 2025
Access Lighting

Access Lighting Aero 20670LEDDLP Manual

27 Juni 2025
Access Lighting

Access Lighting Arc 62516LEDD Manual

27 Juni 2025
Access Lighting

Access Lighting Bi-Punch 62238LEDD Manual

27 Juni 2025
Access Lighting

Access Lighting Elementary 20419 Manual

27 Juni 2025
Access Lighting

Access Lighting Grid 20049LEDDMG Manual

26 Juni 2025

Lys Manualer

Nyeste Lys Manualer

V-TAC

V-TAC VT-10176 Manual

13 August 2025
Eurolite

Eurolite LED IP TMH-H420 Manual

13 August 2025
Eurolite

Eurolite LED Silent Par 6 QCL Floor Manual

13 August 2025
Neewer

Neewer FS600C Manual

13 August 2025
Eurolite

Eurolite LED IP PAR 12x8W QCL Manual

13 August 2025
Philips

Philips Ultinon Essential LED 11258UE2X2 Manual

13 August 2025
Plus More

Plus More MO-HF024 Manual

13 August 2025
Philips

Philips Ultinon Essential LED 11362UE2X2 Manual

12 August 2025
Philips

Philips Ultinon Essential LED 11005UE2X2 Manual

12 August 2025
GLP

GLP Fusion Creos Manual

12 August 2025