APart PA8250 Manual

APart Modtager PA8250

Læs gratis den danske manual til APart PA8250 (6 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6 anmeldelser. Har du et spørgsmål om APart PA8250, eller vil du spørge andre brugere om produktet?

Side 1/6
1. Power switch
Flip this switch to turn power on and off.
2. Power led
This led is lit when power is on.
3. Channel 1 – 8 level controllers
Set the ch. 1 to 8 channel level individually with these level controllers.
4. Channel 1 – 8 status leds:
Upper “limit” led lights up when the internal limiter is active.
This should not or only very sporadically happen. Turn the level controller down if this led lights up
frequently. Lower “signal/protect” led lights up green when a sufciently high signal is present at
channels 1 to 8.
This led lights up red when the internal protection circuitry is active, due to an overload or a short
circuit. When powering up the PA8250, these leds are red during a few seconds,
this is to avoid turn on plops and clicks.
The PA8250 incorporates eight independent high power ampliers in a convenient 19” enclosure.
For those who need more power, there is the possibility of bridging the channels.
This way you can congure the amplier to your needs with a push of a button.
1 3 42


Produkt Specifikationer

Mærke: APart
Kategori: Modtager
Model: PA8250

Har du brug for hjælp?

Hvis du har brug for hjælp til APart PA8250 stil et spørgsmål nedenfor, og andre brugere vil svare dig