Atlas Sound AP-15TC Manual

Atlas Sound Højttaler AP-15TC

Læs gratis den danske manual til Atlas Sound AP-15TC (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Atlas Sound AP-15TC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Specifications subject to change without notice

113

TWO

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435

TECHNICAL SPECIFICATIONS

Models: AP-15, AP-15T(C)

Power Rating: 15 Watts continuous

Frequency Response: 400 - 14,000 Hz (Nominal)

500 Hz - 6,000 Hz (± 5dB)

Sensitivity: 120dB at 15 watts (peak)

116dB at 15 Watts /1 Meter (avg) 500-6000 Hz

106dB 1 Watt/1Meter (avg) 500-6000 Hz

Dispersion Angle: 70° (-6dB, 2000 Hz octave band)

Weight: AP-15 = 3.5 lbs (1.6kgs)

AP-15T = 4 lbs. (1.8kgs)

Finish: Baked epoxy in grey.

Model AP-15TC is beige epoxy.

Dimensions: 7

⁄8

" W x 8

⁄4

" H x 9

⁄16

" D

OMNI-PURPOSE

15 WATT

HORN LOUDSPEAKERS

AP-15

AP-15T(C)

AP-15 Series

FEATURES

• Superior Intelligibility for Voice and Tone Signaling

• High-Efficiency Driver with Proven Performance Reliability

• Transformer (T) Equipped Version for Versatile 25, 70.7, or 100V

Line Applications

• Omni-Purpose

Bracket for Precise Positioning

• Environment Resistant for Outdoor and Indoor Use

• U.S. Trademark Design is World Recognized for Quality and

Dependability

• Available in Grey or Beige (C) Finish

APPLICATIONS

AP-15 and AP-15T environment-resistant loudspeakers are the world

standard for high-intelligibility voice and signal transmission in medi-

um-power indoor and outdoor public address, intercom, security and

industrial-signal-system applications. Cost effective, 15-watt units

incorporate high-efficiency compression drivers to project sound over

long distances or wide areas with fewer loudspeakers. The AP-15

Series is recognized throughout the world as "the performance stan-

dard" for commercial sound, intercom and protective-signaling sys-

tems. Units are commonly installed in commercial buildings, distribu-

tion centers, factories, schools, public access areas, civic centers and

recreational facilities.

GENERAL DESCRIPTION

The 8-ohm Model AP-15 and the transformer-equipped Model AP-15T

are double re-entrant loudspeakers which deliver 15-watts of continu-

ous power handling, superior intelligibility and unparalleled efficiency.

The AP-15 Series operates within a nominal frequency response

range of 400-14,000 Hz and offers a sensitivity of 120dB at rated

power to provide clear voice and signal communication.

Transformer-equipped Model AP-15T includes a versatile, 3-way, 25,

70.7, 100V line transformer to meet a variety of distributed system

needs. The transformer is adjustable using Atlas Sound's exclusive

Vari-Tap

Connect Center which features a 7-position,

watts/impedance selection switch. The labor-saving Vari-Tap

switch

is screwdriver adjustable and includes a protective cover with built-in

cable strain relief.

The trademarked squared-bell design signifies Atlas Sound quality

and reliability. The Omni-Purpose® mounting bracket (supplied on all

models) achieves precise positioning in the vertical and horizontal

planes with a single adjustment and includes provisions for loud-

speaker installation on conventional surfaces as well as for strap-

mounting on I-beams or pillars. AP Series loudspeakers are U.S.

made to assure superior service reliability. Weather-resistant con-

struction is metal and matching ABS plastic with metal components

finished in grey epoxy (standard) or beige epoxy (Model AP-15TC).

The AP-15 Series also includes a 45-ohm Model AP-15-45 and a 4-

ohm AP-15-4 which are designed respectively for intercom and

CB/auxiliary radio applications. (See SL2-1567).

ARCHITECT AND ENGINEER SPECIFICATIONS

Loudspeakers shall be Atlas Sound Model __________ (AP-15, AP-15C, AP-

15T, AP-15TC) or approved equal. Each loudspeaker unit shall be supplied

with integral compression driver and shall be constructed of structural alumi-

num and ABS plastic with double re-entrant acoustic path and exponentially-

flared square bell. The weather-resistant unit shall have a continuous audio

power rating of 15 watts. Frequency response range shall be 400-14,000 Hz

(Nominal), 500-6000 Hz (+5dB). Sound pressure level shall be 116dB

(15W/1M), 106dB (1W/1M). Sound dispersion shall be 70 degrees (-6dB,

2000 Hz octave band). Mounting bracket shall allow vertical and horizontal

adjustment and include provisions for surface mounting, banding or strap-

ping. Loudspeaker shall have impedance selection, via seven-position switch

of 5000, 2500, 1300, 666, 333, 89 and 45 ohms. Power taps shall be avail-

able at .48, .94, 1.8, 7.5, 15 watts for 25V line, 1, 2, 3.8, 7.5, 15 watts for

70.7V line and 2, 4, 8 and 15 watts for 100V line. Wiring terminals shall be

enclosed for security and weather protection. Finish shall be grey or beige (C)

baked epoxy as indicated. Dimensions shall be 7

⁄8" W x 8

⁄4" H x 9

⁄16" D.

ACCESSORIES

BX-2A Vandal Resistant Cover Plate for Armored Cable and Conduit Connection. Constructed of Cast Aluminum.

Produkt Specifikationer

Mærke:	Atlas Sound
Kategori:	Højttaler
Model:	AP-15TC
Kode for international beskyttelse (IP):	IP34
Type:	Kabelforbundet sirene
Bredde:	200 mm
Højde:	222.3 mm
Vægt:	2270 g
Velegnet til:	Indendørs/udendørs
Produktfarve:	Beige
Pakkevægt:	2270 g
Driftstemperatur (T-T):	-40 - 70 °C
Udgangseffekt:	15 W
Alarm decibel:	106 dB
Diameter:	200 mm
Længde:	222.3 mm
Tilgængelig placering:	Indendørs/udendørs