Atlas Sound MLE-3T Manual


Læs gratis den danske manual til Atlas Sound MLE-3T (1 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Atlas Sound MLE-3T, eller vil du spørge andre brugere om produktet?

Side 1/1
1/1
AtlasSound.com
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS002237 RevD 7/12
Wiring the Driver
The back cover of the explosion-proof driver enclosure must be removed for
back cover to avoid damaging the machined surfaces.
Prior to re-assembly, make certain that the joining surfaces of the enclosure
are free of any foreign matter that would interfere with proper mating of the
machined surfaces. Tighten all bolt cover bolts completely.
NOTE: To provide the specified protection in hazardous locations, do not
apply any type of compound/sealant to the machined flange.
The MLE-1 does not include a factory installed pipe seal. The installer must
provide an appropriate connector as directed by local codes or authority
having jurisdiction. A pipe seal with integral field wiring leads is included with
the MLE-3.
The models MLE-1T and MLE-3T include an integral line matching
transformer.
Refer to the wiring diagrams when connecting field wiring.
MLE Series
Explosion Proof Drivers
UNDERWRITERS' LABORATORY LISTINGS
DRIVER CLASS/
GROUP
FOR ATMOSPHERE
CONTAINING:
MLE-1(T) Class 1/
Group C and D
Gas Atmospheres
(Including Ethyl, Gasoline, Naphtha,
Ether, Butane, Alcohols, Propane)
MLE-3(T) Class 1/
Group
B, C, and D
Gas Atmospheres
(Including Ethyl, Ether, Gasoline,
Naphtha, Alcohols, Butane, Propane)
Hydrogen, Gas and Vapor,
(Manufactured Gas)
N O T E : F I E L D W I R I N G M U S T
C O N N E C T T O D E S I R E D
T R A N S F O R M E R P O W E R T A P
TRANSFORMER TAPS,
IMPEDANCE/WATTS
OHMS WATTS, 70V IN WATTS, 25V IN
45 * 15.0
89 * 7.0
167 30.0 3.7
333 15.0 1.89
666 7.5 -
1300 3.7 -
2500 1.8 -
* = DO NOT USE


Produkt Specifikationer

Mærke: Atlas Sound
Kategori: Højttaler
Model: MLE-3T

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlas Sound MLE-3T stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Atlas Sound Manualer

Atlas Sound

Atlas Sound PM4FA-B Manual

20 September 2025
Atlas Sound

Atlas Sound MLE-3T Manual

19 September 2025
Atlas Sound

Atlas Sound FS12T-99 Manual

18 September 2025
Atlas Sound

Atlas Sound IP-8SM Manual

28 December 2024
Atlas Sound

Atlas Sound IP-SDM Manual

21 August 2024
Atlas Sound

Atlas Sound I8SM+ Manual

21 August 2024
Atlas Sound

Atlas Sound SMA-15 Manual

21 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Sven

Sven G600 Manual

27 December 2025
Sven

Sven MC-15 Manual

27 December 2025
Sven

Sven PS-375 Manual

24 December 2025
Phoenix Gold

Phoenix Gold ZP8 Manual

24 December 2025
Sven

Sven MC-25 Manual

23 December 2025
Wharfedale

Wharfedale Elysian 3 Manual

23 December 2025