Atlas Sound AP-30TC Manual

Atlas Sound Højttaler AP-30TC

Læs gratis den danske manual til Atlas Sound AP-30TC (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Atlas Sound AP-30TC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

AtlasSound.com

1/2

AP-30/AP-30T(C)/AP-30T-25

Omni-Purpose

30 Watt Horn Loudspeakers

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

Speciﬁcations

Models AP-30, AP-30T(C), AP-30T-25

Power Rating 30 Watts Continuous

Frequency Response 300 - 12,000 Hz (Nominal)

500 Hz - 4500 Hz (±5dB)

Sensitivity 126dB at 30 Watts (Peak)

121dB at 30 Watts/1 Meter (Avg) 500 - 4500 Hz

108dB at 1 Watt/1 Meter (Avg) 500 - 4500 Hz

Dispersion Angle 60˚ (-6dB, 2000 Hz Octave Band)

Weight AP-30: 4.5 lbs (2.0kgs)

AP-30T: 5 lbs (2.3kgs)

AP-30T-25: 5 lbs (2.3kgs)

Finish Baked Epoxy

Dimensions H 11" x W 10" x D 10

⁄2"

Temperature Range -40˚C - 70˚C

Architect and Engineer Speciﬁcations

Loudspeakers shall be Atlas Sound Model ____________ (AP-30 or,

AP-30T(C), or AP-30T-25) or approved equal. Each loudspeaker shall be

equipped with an integral compression driver within waterproof housing.

The loudspeaker unit shall be constructed of structural aluminum with

double re-entrant acoustic path and exponentially-flared outer bell.

Power handling capability shall be 30 Watts continuous. Frequency

response range shall be 300-12,000 Hz (nominal), 500-4500 Hz (+5dB).

Sound pressure level shall be 121dB (30W/1M), 108dB (1W/1M). Sound

dispersion angle shall be 60˚. Model AP-30 shall have voice coil impedance

of 8 Ohms. Models AP-30T and AP-30T(C) shall have impedance selection

of 2500, 1300, 666, 333, 167, 89, 45 Ohms for 25, 70.7, or 100V line.

Power taps shall be available at .9, 1.8, 3.7, 7.5 and 15 watts for 25V

line; 2, 3.8, 7.5, 15 and 30 watts for 70V line; 4, 7.7, 15 and 30 Watts

for 100V line. Model AP-30T-25 shall have selection of 500, 250, 125,

83, 42, 21 Ohms for 25V line. Power taps shall be available at 1.2, 2.5,

5, 7.5, 15, 30 Watts. Loudspeaker shall be furnished with mounting

bracket allowing adjustment on the vertical and horizontal planes and shall

include provisions for surface or strap mounting. Wiring terminals shall be

enclosed. Units shall be weatherproof and constructed of metal and ABS

plastic. Finish shall be grey or beige (C) baked epoxy as indicated.

Di men sions shall be H 11" x W 10" x D 10

⁄2".

Features

• Superior Intelligibility for Voice and Tone Signaling

• Wide Frequency Response for Optimum Sound Quality

• Environment Resistant for Outdoor and Indoor Use

• Omni-Purpose

Bracket for Precise Positioning

• Choice of 8 Ohm or Transformer (T) Equipped Models for Versatile

25, 70.7, or 100V Line Applications

• U.S. Trademark Design is World Recognized for Quality and Dependability

• Available in Grey or Beige (C) Finish

Applications

All-purpose, environment resistant 30-Watt AP-30 Series loudspeakers

provide cost effective high-intelligibility voice and signal transmission

for high power indoor and outdoor public address, intercom, security,

alarm, or industrial signal systems. Units incorporate high-efficiency

compression drivers to project through high ambient sound levels,

over long distances and in wide open areas with fewer loudspeakers.

The AP-30 Series is renowned in the industry as the “professional

standard” for applications such as commercial buildings, distribution

centers, industrial warehouses, institutions, civic centers, and

recreational facilities.

Description

The 8 Ohm Model AP-30 and transformer-equipped Models AP-30T and

AP-30T-25 are double re-entrant loudspeakers which deliver 30 Watts

of continuous power handling, superior intelligibility and unparalleled

audio conversion-efficiency. The AP-30 Series operates within a

nominal frequency range of 300-12,000 Hz and offers a sensitivity of

126dB at rated power to provide clear voice and signal communication.

Models AP-30T and AP-30T-25 each feature an integral transformer to

meet a variety of distributed system needs. The AP-30T is equipped

with a versatile, 3-way, 25, 70.7, 100V line transformer, while Model

AP-30T-25 includes a 25V only line transformer. Transformers are

adjustable using Atlas Sound’s exclusive Vari-Tap

Connect Center which

features a 7-position, watts/impedance selection switch. The labor saving

Vari-Tap

terminal is screwdriver adjustable and includes a protective

cover with built-in strain relief.

The trademarked square bell design signifies Atlas Sound quality and

reliability. The Omni-Purpose

mounting bracket (included on all models)

allows precise positioning in the vertical and horizontal planes with a

single adjustment and provides for installation of the loudspeaker on

conventional surfaces or by strap-mounting to I-beams or pillars. AP

Series loudspeakers are U.S. made to assure superior service reliability.

Weather-resistant construction is metal and matching ABS plastic with

metal components finished in grey epoxy (standard) or beige epoxy if

suffixed with (C) where noted.

Accessories

BX-1A Vandal resistant cover plate for armored cable

and conduit connection. Constructed of cast

aluminum.

APXB-G/APXB-N Optional mounting base for a standard 1-gang,

2-gang, or 4" sq. E.O. box. (G-Grey or N-Neutral)

AP-30 Series

Produkt Specifikationer

Mærke:	Atlas Sound
Kategori:	Højttaler
Model:	AP-30TC
Bredde:	254 mm
Dybde:	266.7 mm
Højde:	279.4 mm
Vægt:	2860 g
Antal pr. pakke:	1 stk
Produktfarve:	Beige
Udgangseffekt (RMS):	30 W
Driftstemperatur (T-T):	-40 - 70 °C
Frekvensområde:	300 - 12000 Hz
Højttaler, placering:	Ceiling-mountable, Wall-mountable
Sensitivitet:	108 dB
Egnet til udendørs brug:	Ja