Atlas Sound FAP63T-W Manual

Atlas Sound Højttaler FAP63T-W

Læs gratis den danske manual til Atlas Sound FAP63T-W (7 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Atlas Sound FAP63T-W, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
1/7
AtlasIED.com
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005231 RevC 3/16
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
FAP63T-W
FAP Strategy III Series Ceiling Loudspeaker
General Description
The FAP63T-W’s 130° dispersion angle can reduce the number of
loudspeakers necessary to achieve coverage in distributed systems with
low ceilings. The loudspeaker component matches the performance
of the legendary Atlas Sound FA136 driver. High quality construction
6.5" coaxial cone type driver includes a 1" voice coil and high efficiency
composite cone with polymer coated cloth surround. The 20mm
coaxially mounted silk dome tweeter. A high sensitivity of 90dB average
means less power may be required to achieve the desired SPL.
This loudspeaker is factory assembled in an optimally tuned and ported
deep drawn enclosure and includes a specially designed 32-watt low
saturation 70.7V / 100V transformer. A convenient front mounted
selector switch allows tap selection without the need to remove the
loudspeaker from the ceiling. This switch also includes a transformer
bypass setting for 8 direct coupled operation.1
Three years of development has produced the most innovative, easily
installed, and safety-secure ceiling loudspeakers in the professional
audio market. Patented Safety First Mounting System protects from
over-torquing the mounting doglegs during installation and potentially
cracking or breaking the mounting system. The results are NO install
tools required, NO over-torqued doglegs, NO rusted screws and QUICK
installation.
Applications
Atlas Sound’s FAP63T-W combines superior coaxial loudspeaker
performance with even dispersion and easy installation. A low profile
enclosure and wide coverage make the FAP63T-W a perfect choice for
low ceilings.
The FAP63T-W will satisfy the needs of owners, architects, contractors,
and consultants by delivering true, high fidelity sound reproduction
in an attractive and easy-to-install system. The FAP63T-W is ideal for
high-intelligibility voice, music, and signal reproduction in commercial,
industrial, and institutional applications.
FAP63T-W
Features
• 70.7V/100V and 8 Operation1
• Patented Safety First Mounting System Enables Installation without
Drill or Screwdriver
• Improved Waveguide Provides up to 110° Dispersion
• Ported Enclosure Provides Enhanced Low-Frequency Response
• 4-Pole Detachable “Phoenix” Style Connector Allows Easy Pre-Wiring
and Is Convenient for Daisy Chaining Additional Strategy Series Full
Range Loudspeakers or Subwoofers
• Front Mounted Tap Selector Switch for Easy System Tuning
Adjustments Include Transformer Bypass Setting for 8 Direct 1
Coupled Operation
• Easy Installation in Drop Tile or Sheetrock Ceilings Via C-Ring/V-Rail Tile
Bridge (Included)
• Safety Listed to UL1480 and UL2043
2/7
AtlasIED.com
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005231 RevC 3/16
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
System
Type Two Way, Full Range, Coaxial Ceiling Loudspeaker
Operation Mode Non-Powered Passive
Operating Range (-10dB) 56Hz
Frequency Response (+/- 5dB) 50Hz - 20kHz (±3 dB)
Vertical Coverage 130º 800Hz - 4kHz
Horizontal Coverage 130º 800Hz - 4kHz
Max Input Ratings (8 ) 75W Continuous, 150W Program1
24.5 Volts RMS, 49 Volts Momentary Peak
Transformer Taps - 70V 32W, 16W, 8W, 4W and Low Impedance (8 )1
Transformer Taps - 100V 32W, 16W, 8W
Directivity Factor (Q) 7.62 @ 2kHz
Directivity Factor (DI) 8.82 @ 2kHz
Input Sensitivity at 1W/1m 90 dBSPL
Max SPL at 1 m (Passive) 108.5 dB Continuous / 115 dB Peak
Recommended Signal Processing 80Hz
Recommended Power Amplification 200W at 81
Transducers
LF Transducer Qty and Size 1 x 6.5"
LF Voice Coil Size 1"
MF Transducer Qty and Size N/A
MF Voice Coil Size N/A
HF Transducer Qty and Size 1 x 20mm Treated Silk Dome Tweeter
Maximum Output 108.5 dB SPL / 115 dB SPL (Peak 8 )1
Nominal Impedance 81
Minimum Impedance 7.1 @ 212Hz1
Crossover Frequency 2.5kHz
Driver Protection N/A
Enclosure
Color White (RAL 9016)
Enclosure Material Powder Painted CRS
Grille Material Powder Coated CRS, White Finish (RAL9016), Paintable
Baffle Material UL94V-0 PC
Mount Material Zinc Plated CRS
Input Connection 4-Position PHX Type Connector
Controls Front-Face Power Taps / Low Impedance Selector Switch
Mounting/Rigging Provisions Patented Safety First Mounting System
Safety Features 1 Safety Hang Point
Safety Agency Ratings UL Listed to Comply with UL1480, UL2043 and CSA60065.
Suitable for Use in Air Handling Spaces per NFPA 70 and NFPA 90.
Ingress Protection IP-21
Environmental Testing Humidity: MIL-STD-810G / High and Low Temperature: -20° and 70° C
Cutout Diameter 9.18" (233 mm)
Logo White Removable
Product Dimensions (HxWxD) 10.51" (267 mm) x 10.51" (267 mm) x 8.86" (225.1 mm)
Shipping Dimensions (HxWxD) 15.04" (382 mm) x 28" (711 mm) x 12.3" (312 mm)
Net Weight - lbs Unit w/ C-Ring = 7.82 lbs (3.54 kg) 2V-rails = 2.1 lbs (.95 kg)
Shipping Weight - lbs 27.19 lbs (12.33 kg) Shipped in Pairs
Warranty Coverage
Warranty Period 5 Years
NOTES:
1. Sensitivity: Half space, 1 meter, 2.83 volts RMS.
2. Power: All power figures are calculated using the rated nominal impedance.
3. Frequency response and sensitivity are half-space measurements.

Produkt Specifikationer

Mærke: Atlas Sound
Kategori: Højttaler
Model: FAP63T-W

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlas Sound FAP63T-W stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler Atlas Sound Manualer

Atlas Sound

Atlas Sound HT327 Manual

9 Juni 2025
Atlas Sound

Atlas Sound IP-8SM Manual

28 December 2024
Atlas Sound

Atlas Sound IP-SDM Manual

21 August 2024
Atlas Sound

Atlas Sound M1000-W Manual

21 August 2024
Atlas Sound

Atlas Sound I8SM+ Manual

21 August 2024
Atlas Sound

Atlas Sound PM8GD-B Manual

21 August 2024
Atlas Sound

Atlas Sound SMA-15 Manual

21 August 2024
Atlas Sound

Atlas Sound GD87W Manual

21 August 2024
Atlas Sound

Atlas Sound DT22 Manual

21 August 2024
Atlas Sound

Atlas Sound All Weather SM63T Manual

21 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Valcom

Valcom InformaCast VIP-411A-IC Manual

30 Juli 2025
FoneStar

FoneStar MOV-684PR-L Manual

30 Juli 2025
Marshall

Marshall Middleton II Manual

30 Juli 2025
Audiocase

Audiocase S5 Manual

30 Juli 2025
JLab

JLab Pop Party Manual

30 Juli 2025
Audac

Audac MBK621A Manual

30 Juli 2025
Audac

Audac MBK622A Manual

30 Juli 2025
Rockustics

Rockustics SquareRoot 6.5 TC Manual

30 Juli 2025
Valcom

Valcom VIP-430A-IC Manual

30 Juli 2025
TW AUDiO

TW AUDiO M8 Manual

30 Juli 2025