Atlas Sound FM250-70 Manual

Atlas Sound Modtager FM250-70

Læs gratis den danske manual til Atlas Sound FM250-70 (3 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Atlas Sound FM250-70, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

– 9 – AtlasSound.com

Specifications are subject to change without notice.

Owner’s Manual

F6-MF

Multi-Impedance Modular Amplifier

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

FM250-4 and FM250-70 Module Features

1. Module Status Indicators

Note: They also parallel Status LED on the front panel of the F6-MF panel.

Ready This LED will illuminate Green when an FM250 power module is installed on the appropriate channel and the F6-MF is

turned on.

Signal The channel Signal LED will illuminate Green when the FM250 amplifier output signal produces a minimum 1 Watt

output.

Limit The Limit LED will illuminate Yellow under load conditions. If the FM250 function switch is set to Limit then the LED

acts as a maximum level indicator. If the FM250 channel Limit function is off, the LED reacts as a Clip indicator. Also,

under Low Impedance loads, this LED serves as a current Limit indictor.

Protect The Protect LED will illuminate Red during one the following conditions. No output will occur while this LED is

illuminated. It will reset itself after the condition has been corrected.

1) Shorted speaker output.

2) Thermal Shut Off. The Temp F6-MF TEMP LED will also be illuminated.

3) Current Overdrive. If the amplifier channel is driving too low of a speaker load.

2. Speaker Connections

A removable Phoenix/Euro Block type connector is supplied to connect your speakers to the FM250 amplifier module. It is

recommended to use 16-gauge wire or lower for connection to the speakers. Note: Do not overload the amp by connecting too many

speakers to the amp.

Protect

Limit

Signal

Ready

Speaker Output

Class 2 Wiring

4 Ω

FM250 - 4

250W @ 4Ω

Protect

Limit

Signal

Ready

Speaker Output

Class 2 Wiring

70V

FM250 -70

250W @ 70V

Produkt Specifikationer

Mærke:	Atlas Sound
Kategori:	Modtager
Model:	FM250-70

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlas Sound FM250-70 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Atlas Sound Manualer

Atlas Sound DPA-AMIX Manual

18 September 2025

Atlas Sound HPA-DAC8 Manual

28 August 2025

Atlas Sound HPA4202 Manual

28 August 2025

Atlas Sound DP-1A Manual

17 Juli 2025

Atlas Sound Z-SIGN Manual

10 Juni 2025

Atlas Sound AA120M Manual

19 December 2024

Atlas Sound PA702 Manual

18 December 2024

Atlas Sound AA35 Manual

18 December 2024

Atlas Sound AP-S15 Manual

18 December 2024

Atlas Sound AL2430 Manual

18 December 2024

Modtager Manualer

Nyeste Modtager Manualer

Kramer WP-DEC7 Manual

17 Oktober 2025

FBT MXA 3120 Manual

17 Oktober 2025

Rotel C8 Manual

15 Oktober 2025

Rotel RA-11 Manual

15 Oktober 2025

Rotel A10 MKII Manual

15 Oktober 2025

Ecler GPA2-800 Manual

15 Oktober 2025

Sundown Audio Horizon HZ-1000 Manual

15 Oktober 2025

Memphis Audio SRX600.1V Manual

14 Oktober 2025

Axiom ADA-1000 Manual

14 Oktober 2025

Kenwood DMX1058XR Manual

14 Oktober 2025