Atlas Sound SC-15 Manual

Atlas Sound Højttaler SC-15

Læs gratis den danske manual til Atlas Sound SC-15 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Atlas Sound SC-15, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Specifications subject to change without notice

137

TWO

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 FAX (800) 765-3435/ AtlasSound.com

COMPACT HIGH-EFFICIENCY 15-WATT LOUDSPEAKER SC-15

SC-15-45

FEATURES

• Value-priced, high efficiency, multi-function loudspeaker

• Precision-built 15 watt compression driver for optimum power

and intelligibility

• Environment resistant construction for long term indoor/outdoor use

• Compact size and styling enhance application flexibility

APPLICATIONS

Atlas Sound SC Series are compact, environment-resistant loudspeakers

for high-efficiency sound and signaling in intercom, sound and alarm

systems. Value-priced units are ideal as extension loudspeakers and

communication receivers. They are intended for indoor or outdoor instal-

lations in low to medium noise level environments when spot-coverage

or directional sound projection is desired. Popular applications for these

U.S.-crafted loudspeakers include retail service establishments, drive-in

facilities, industrial and manufacturing areas, warehouses, social and

recreational centers.

GENERAL DESCRIPTION

SC Series double re-entrant acoustic path loudspeakers are low-cost,

weatherproof units which reproduce voice and signal communication

with high intelligibility. Models include a built-in 15-watt compression

driver with 8 or 45-ohm impedance. Model SC-15-45 is a 45-ohm unit

for intercom uses and Model SC-15 is an 8 ohm version for multi-pur-

pose installations. All SC Series loudspeakers are equipped with a

high impact molded plastic bell, metal mounting bracket and will an

accommodate optional 70.7/25-volt transformer. They also feature a

swivel base with nut assembly for easy-to-adjust horizontal and verti-

cal positioning. Termination is via a 12" connecting cable. Finish is

light beige epoxy.

ARCHITECT AND ENGINEER SPECIFICATIONS

Loudspeaker shall be Atlas Sound ______________ (Model SC-15 or

SC-15-45) or approved equal. Continuous full range audio power

rating shall be 15 watts at frequencies above horn cut-off. Frequency

response shall be 6,000 Hz (600- +5dB). Sound pressure level shall

be 114dB measured at rated power, 1 meter. Dispersion angle shall

be 95°. Built-in compression driver shall have an impedance of

_____________ (8 or 45-ohms as specified). Finish shall be light

beige epoxy. Weight is 21

⁄2lbs. (1.13kgs).

TECHNICAL SPECIFICATIONS

Models: SC-15 (8-ohm)

SC-15-45 (45-ohm)

Power Rating: 15 watts

Freq. Resp. (8-ohm): 600-6,000 Hz (+5dB)

Sensitivity (SPL)

(8-ohm): 117dB at 15 watts (peak)

114dB at 15 watts/1 meter (avg) 600-6,000Hz

103dB at 1 watt /1 meter (avg) 600-6,000 Hz

Sensativity as a

Microphone: -19dB

Dispersion Angle: 95° (-6dB, 2 kHz octave band)

Dimensions: 61

⁄4" Dia. x 615⁄16" D (159mm x 176mm)

Weight: 2 1

⁄2lbs. (1.13kgs)

Finish: Light beige epoxy

SC Series

ACCESSORIES:

T-10: 25/70.7V Line Matching Transformer

T-11: 25/70.7V Line Matching Transformer

in Outdoor Housing

⁄

" Banding Slot

.203 Dia.

3 Holes 120° Apart on 2.312 Dia.

Specifications subject to change without notice

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 FAX (800) 765-3435/ AtlasSound.com

SC-15 (8 Ohm Model)

(Harmonic Distortion 1watt at 1 meter)

SC-15 Impedance (8 Ohm Model)

Horizontal Polars Are Normalized To Zero On Axis

SC Series

Frequency (Hz) Q Di Beamwidth (degrees)

1000 3 5 165

2000 7 9 95

4000 22 14 55

8000 37 16 35

DRIVER PROTECTION: The horn loudspeaker should not be operated at frequen-

cies outside the horn cut-off. It is suggested that any program material be high-passed

at 400 Hz with a minimum slope 6dB per octave. This can be done by a low level filter

at the amplifier input or by a series capacitor at each loudspeaker. Non-polarized elec-

trolytic capacitors may be used.

Atlas Sound products are designed and tested in our well-equipped research laboratory which contains a fully anechoic chamber, complete

analog Bruel & Kjaer measurement equipment and Techron®TEF 20®audio analyzer. Atlas Sound is proud to be a beta site for TEF software.

SC-15 Frequency Response (8 Ohm Model)

Frequency (Hz)

MAGNITUDE (dB) MAGNITUDE (dB)

Produkt Specifikationer

Mærke:	Atlas Sound
Kategori:	Højttaler
Model:	SC-15

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlas Sound SC-15 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Atlas Sound Manualer

Atlas Sound HT327 Manual

9 Juni 2025

Atlas Sound IP-8SM Manual

28 December 2024

Atlas Sound IP-SDM Manual

21 August 2024

Atlas Sound M1000-W Manual

21 August 2024

Atlas Sound I8SM+ Manual

21 August 2024

Atlas Sound PM8GD-B Manual

21 August 2024

Atlas Sound SMA-15 Manual

21 August 2024

Atlas Sound GD87W Manual

21 August 2024

Atlas Sound DT22 Manual

21 August 2024

Atlas Sound All Weather SM63T Manual

21 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Valcom InformaCast VIP-411A-IC Manual

30 Juli 2025

FoneStar MOV-684PR-L Manual

30 Juli 2025

Marshall Middleton II Manual

30 Juli 2025

Audiocase S5 Manual

30 Juli 2025

JLab Pop Party Manual

30 Juli 2025

Audac MBK621A Manual

30 Juli 2025

Audac MBK622A Manual

30 Juli 2025

Rockustics SquareRoot 6.5 TC Manual

30 Juli 2025

Valcom VIP-430A-IC Manual

30 Juli 2025

TW AUDiO M8 Manual

30 Juli 2025