Echizen lacquerware has been loved by people for a long time because of its unique deep shine and durability. The
history of Echizen lacquerware dates back more than 1,500 years, and the craftspeople of Echizen continue to pass
on their traditional skills and techniques to the present day. Lacquerware as a traditional craft is widely used not
only for household items such as bowls and rice stacks, but also for interior decorations and gifts that match
modern sensibilities and lifestyles.
The ATH-AWSW DV features Echizen-nuri, a lacquer coating applied to the housing of the headphones. Each
maki-e headphone is hand-drawn by a craftsman who put their heart and soul into each stroke, making it a unique
piece of artistic expression.
Echizen Lacquer with a history of over 1,500 years
Follow applicable laws regarding headphone use if using the product while driving.
Do not use the product in places where the inability to hear ambient sound presents a serious risk (such as at
railroad crossings, train stations, and construction sites).
To prevent damage to your hearing, do not raise the volume too high. Listening to loud sound for an extended
period may cause temporary or permanent hearing loss.
Discontinue use if skin irritation results from direct contact with the product.
Do not disassemble, modify or attempt to repair the product.
Be careful to avoid pinching yourself between the housing and the arm of product.
Cautions for the headphones
Do not put the product in places that are unstable or that vibrate to prevent damage from the product being
Keep the product out of the reach of small children to prevent injury from the product being dropped.
Cautions for the headphone stand
Thank you for purchasing this Audio-Technica product.
Before using the product, read through this user manual to ensure that you will use the product correctly. Please
keep this manual for future reference.
ご購入の製品をご家庭用として、取扱説明や接続・注意書きに沿ったご使用において、故障や品
質不良が発生した場合は、ご購入日より１年間を製品保証期間として無料修理（製品により無料
代替）をいたします。ただし、消耗・摩耗した部品 ( ヘッドホンのイヤパッドやイヤピース、カートリッ
ジの針先、電池など )、ポーチなどの収納ケース類やその他の付属品、および本製品や接続した
機器のソフトウェアおよびデータなどは補償いたしかねます。また、保証期間内でも以下の場合は、
1.当社が認める正規販売店以外での購入の場合。
3.ご購入年月日（保証開始時期）を証明するもの ( ご購入レシートなど ) がない場合。
4.ご購入後の落下・圧迫・衝撃などによる損傷、変形。
6.本製品以外の機器が原因となって生じた故障。
7.当社以外で行われた修理や分解、改造で生じた故障。
8. 設置場所の移設・輸送・移動・落下などによる故障。
9.天災、公害、塩害、ガス害、異常電圧など、不可抗力による故障。
10.一般家庭用途以外での使用で生じた故障。( 車載用製品を除く)
11. 車載用途以外での使用で生じた故障。( 車載用製品のみ )
12.そのほか当社の合理的判断に基づき有料と認められる場合。
1.本製品の保証は、定められた保証期間、条件のもとにおいて無料修理をお約束するものです。
従って、この記載内容によってお客様の法律上の権利が制限されるものではありません。
2.本製品の保証は日本国内でのみ有効です。(ThiswarrantyisvalidonlyinJapan.)
3.保証書は再発行いたしませんので、大切に保管してください。
製品保証期間経過後も、有料で修理または製品代替をいたします。
購入店名印の捺印・購入日の記載がある本保証書（または購入日を特定できる領収書など）、下
記内容を記載した修理依頼書（または同様内容が記載されたメモ）をご用意の上、当社サービス
センターまで宅配便などでお送りいただくか、購入店までお持込みください。
保証の期間内、期間経過後を問わず、修理・検査のために製品をお送りいただく場合は、お客様
に送料をご負担いただきます。予めご了承ください。ご送付の際には輸送中の事故がないように製
修理後、同一箇所に同一の故障が生じた場合は、保証期間を超過しても修理完了日より 3 カ月
Although this product was designed to be used safely, failing to use it correctly may result in an accident. To
ensure safety, observe all warnings and cautions while using the product.
To ensure compatibility and correct usage, always consult the user manual of any device before connecting the
Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should
occur while using the product.
On public transport systems or in other public places, keep the volume low so as not to disturb other people.
Minimize the volume on your audio device before connecting the product in order to avoid hearing damage from
sudden exposure to excessive volume.
Do not subject the product to strong impact to avoid electric shock, malfunction or fire.
Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place. Do not
allow the headphones to get wet.
Over a long period of use, the product may become discolored due to ultraviolet light (especially direct sunlight)
For product improvement, the product is subject to modification without notice.
Dimensions (without rubber feet) 200 mm (7.9”) × 240 mm (9.4”) × 120 mm (4.7”) (W×H×D)
Weight Approx. 620 g (21.9 oz)
Maximum load 1 kg (2.2 lbs)
Synthetic leather (Cable wrap)
Frequency response 5 to 45,000 Hz
Maximum input power 2,000 mW
Input jack A2DC connector jack
Weight (without cable) Approx. 415 g (15 oz)
Cable (3.0 m (9.8’)/6.3 mm (1/4”) gold-plated stereo plug)
Cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug)
351727900-01- 02 ver.2 2025.04.15
For long-time storage, keep the product in a well-ventilated place without high temperatures and humidity.
The earpads deteriorate over time due to use or storage. For information about replacing earpads or other
parts, or for information about other serviceable parts, contact your local Audio-Technica dealer.
Make sure to connect/disconnect the included cable by holding the plug. Pulling directly on the included cable
can result in a broken wire and the risk of electric shock.
The cable may become caught or severed if the product is placed in a bag without adequate protection.
Do not wrap the included cable around a rack, furniture or other object. Do not allow the cable to be pinched.
This may damage or sever the cable.
Use only the included cable. Using a different cable may result in product malfunction.
Lengthening the headphone cable requires a separate extension cable available from your dealer.
Since natural wood may may deform or change color under the condition like a hot, humid, dry, ultraviolet
(sunlight, fluorescent) environment, be careful in these environments.
The wooden housing may scratch or split if subjected to impact.
Adjust the headband length by sliding the adjustable slider as
shown in the figure so that the earpads cover your ears completely.
Confirm each part before using the product.
(3.0 m (9.8’) / 6.3 mm (1/4”) gold-plated stereo plug)
Cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug)
The cable on this product is detachable. If there are signs of deterioration, replace the cable.
About the detachable cable
The detachable connector is very delicate. Only pull or attach in a straight motion to prevent malfunction.
How to replace the detachable cable
About the headphone stand
1. Connect the connector plug of the included cable to the connector jack of the headphones.
Refer to “About the detachable cable” for detailed information.
Do not use a cable other than the supplied detachable cable.
2. Lower the volume on the device you intend to use, then connect the Input plug to the device’s headphone
3. Fit the earpads over your ears with the side marked “LEFT” over your left ear and the side marked “RIGHT”
4. Turn on your audio device, and adjust volume as necessary.
Also read the user manual for the audio device.
Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol,
paint thinners or other solvents for cleaning purposes.
The warranty is valid only in Japan. If you take the product to a country other than Japan after purchase, contact
your local Audio-Technica dealer for warranty information.
Global Support Contact: www.at-globalsupport.com
Hold the connector and pull straight
out in the direction shown by the
Plug the left connector or right
connector of the cable in as shown in
the figure until it clicks.
Use this high-performance product with premium audio equipment to enjoy higher sound quality.
Do not detach the cable except when replacing it with a new cable.
The headphone stand is made to hold headphones only. It is not meant to
be used with other items.
Do not subject the headphone stand to strong impacts to prevent damage.
Do not put the headphone stand in a location where it is exposed to direct
sunlight, near heating devices, or in places with high temperatures, high
humidity, or high concentrations of dust to prevent damage. Do not allow
the headphone stand to get wet.
Make sure to open the headphones with both hands when taking them
on/off the headphone stand.
If a cable is attached to the headphones, make sure when removing
headphones that the cable does not catch on the stand and knock it over.
Do not put the headphone stand on items that generate heat, such as an
If the headphone stand is placed on sensitive materials, the rubber feet
Use a soft cloth to clean the headphones.
Clean off the dust from the housing without wiping hard and then, wipe it with a soft cloth.
After using the included cable, clean it with a dry cloth if sweat or dirt is present. Failure to clean the cable may
cause it to deteriorate and harden over time, resulting in malfunction.
Wipe the plugs on included cable with a dry cloth if dirty. Using the plug without cleaning it can cause sound
To clean the earpads and headband, wipe with a dry cloth. Earpads and headband may fade if sweat or water
dries on them. If the earpads and headband get wet, we recommend wiping them with a dry cloth and allowing
them to dry in the shade.
Do not use, leave or store lacquered products in the following places as they may deform or discolor:
Places with sudden temperature changes
Places exposed to ultraviolet rays (sunlight, fluorescent lamps)
High temperature and humidity
〒194-8666 東京都町田市西成瀬 2-46-1
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2025 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
Audio-Technica Corporation
オーディオテクニカ製品をご購入いただき誠にありがとうございます。下記は、当社製品の製品保
証規定および修理に関してのご案内です（必ずお読みください）。ご購入の際の領収書またはレシー
トなどは大切に保管してください。修理の際に保証開始日の確認のためご提示いただきます。
本製品は限定生産品のため、修理パーツには限りがあります。修理パーツがなくなった場合は修
理などのご要望に沿えないこともありますのでご了承ください。
製品型番/ご購入日 -購入店名/故障内容（できるだけ詳細にお願いいたします）/
ご連絡先情報（住所・氏名・日中ご連絡ができる電話番号、メールアドレスなど）
本商品は、ウォルト・ディズニー・ジャパン株式会社と株
式会社オーディオテクニカの契約により、製造したものです。
This product was manufactured under a contract between The Walt
Disney Company (Japan) Ltd. and Audio-Technica Corporation.
