Audio-Technica ATW-CHG2 Manual

Audio-Technica Ikke kategoriseret ATW-CHG2

Læs gratis den danske manual til Audio-Technica ATW-CHG2 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 118 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 59.5 anmeldelser. Har du et spørgsmål om Audio-Technica ATW-CHG2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ATW-CHG2

Two-Bay Recharging Station

For use with 2000 Series

wireless transmitters:

ATW-T210a UniPak® Transmitter

AT W-T220a Handheld Transmitter

Audio-Technica U.S., Inc. 1221 Commerce Drive, Stow, Ohio 44224 USA +1 (330) 686-2600

Audio-Technica Limited Old Lane, Leeds LS11 8AG England +44 (0) 113 277 1441

Audio-Technica (Greater China) Limited Unit K, 9/F., Kaiser Est. (Ph.2) 51 Man Yue St. Kowloon, HK. +852-2356-9268

Audio-Technica (S.E.A.) Pte. Ltd.

No 1 Ubi View, #01-14 Focus One, Singapore 408555 +65-6749-5686

Audio-Technica Corporation 2206, Naruse Machida, Tokyo Japan

P52205 P# 2323-04430

To reduce the environmental impact of a multi-language printed document, product information

is available online at www.audio-technica.com in a selection of languages.

An de réduire l’impact sur l’environnement de l’impression de plusieurs, les informations

concernant les produits sont disponibles sur le site www.audio-technica.com dans une large

sélection de langue.

Para reducir el impacto al medioambiente, y reducir la producción de documentos en varios

leguajes, información de nuestros productos están disponibles en nuestra página del Internet:

www.audio-technica.com.

Para reduzir o impacto ecológico de um documento impresso de várias linguas, a Audio-Technica

providência as informações dos seus produtos em diversas linguas na www.audio-technica.com.

Per evitare l’impatto ambientale che la stampa di questo documento determinerebbe, le

informazioni sui prodotti sono disponibili online in diverse lingue sul sito www.audio-technica.com.

Der Umwelt zuliebe nden Sie die Produktinformationen in deutscher Sprache und weiteren

Sprachen auf unserer Homepage: www.audio-technica.com.

Om de gevolgen van een gedrukte meertalige handleiding op het milieu te verkleinen, is

productinformatie in verschillende talen “on-line” beschikbaar op: www.audio-technica.com.

DANGER

This charger is designed only for Ni-MH rechargeable batteries.

To avoid personal injury and damage, do not attempt to charge alkaline

batteries or any other rechargeable batteries besides Ni-MH.

WARNING

• To prevent re or shock hazard, do not expose this product to drips

or splashes.

• To prevent re, do not place any naked ame sources (such as lighted

candles) on the product.

• To prevent re, do not cover the ventilation of product with newspaper,

tablecloths, curtains, etc.

• Do not install this product in a conned space such as a bookcase

or similar unit.

• Do not open the cover. No user serviceable parts inside.

• Do not place any objects lled with liquids, such as vases, on

the product.

CAUTION

• Do not use the charger in extremely cold or hot conditions.

• Keep the charger out of reach of small children.

• Danger of explosion if the wrong type of batteries are used.

• The battery rating label is on the bottom of the apparatus.

• Replace batteries only with the same or equivalent type.

• The charger should be located close enough to the AC outlet so that

you can easily grasp the AC adapter at anytime. In case of emergency,

disconnect the AC adapter quickly.

• Do not expose batteries or charger to excessive heat such as direct

sunlight, re or the like.

RECyClING Of NI-MH bATTERIEs

• Do not dispose the batteries as unsorted municipal waste; use separate

collection facilities.

• Contact your local government for information regarding the collection

systems available.

CANADA ONly

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme á la norme NMB-003 du Canada.

OpERATING pRECAUTIONs

Battery Charger

• It is not abnormal for the charger and the rechargeable batteries to

become warm during recharging.

Batteries

• For best performance and optimal safety, use only the included

2000 mAh Ni-MH or similar type batteries.

• It is often necessary to cycle new or deeply discharged Ni-MH batteries

two or three times before they reach peak performance. To cycle the

batteries, simply use them as you normally would and then recharge them.

COMplIANCE WITH fCC RUlEs (UsA ONly)

This device complies with Part 15 of FCC rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

fCC WARNING

You are cautioned that any changes or modications not expressly approved

in this manual could void your authority to operate this equipment.

NOTICE

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communication.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures;

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

ATW-CHG2 Features

• Batteries are charged within the transmitters.

• Versatile unit charges ATW-T220a handheld transmitters and/or

ATW-T210a UniPak® transmitters (in any combination).

• Built-in safety feature monitors cell voltage and automatically turns

off the unit if problems are detected.

• Automatic shut-off if alkaline (non-rechargeable) batteries

are installed.

• Automatic shut-off if damaged batteries are installed.

• Maintenance charging prevents battery self-discharge until the

transmitter is removed from charger.

• Includes Ni-MH rechargeable batteries – 2 x AA 2000 mAh

LED Status Indication

Charger indicator Charging Transmitter

status status status

Off Power off Transmitter not in unit

Red light Charging* Transmitter in unit

Red ashing Charging error Transmitter in unit

(Charging is stopped)

Off Charging is nished Transmitter in unit

(Still maintenance charging)

Note: Red ashing light (charging error) is caused by use of alkaline

(non-rechargeable) or damaged battery.

*Note: If a transmitter with fully charged batteries is placed in the

charger, the red light will remain on for a minimum of 3 hours, even

though the batteries are fully charged.

Specications*

Input Rating 12V DC, 320 mA (maximum)

Output Rating 3.2V DC, 320 mA x2

Charging Time Approx. 10 hours (2000 mAh Ni-MH)

Operating 0~+40º C

Temperature

Dimensions Approx. 131.0 mm (5.16") W x

130.0 mm (5.12") D x 105.0 mm (4.13") H

Weight Approx. 40 g (1.4 oz)

*Specications are subject to change without notice.

How to charge

1. Connect the power cord.

2. Set the transmitter’s power switch to the off position.

(Note: The transmitter’s power is automatically turned off if the

transmitter is set in the charger with its power switch on; in this

case, the transmitter will resume operation when it is removed

from the charger.)

3. Install the Ni-MH AA batteries in the transmitter, observing correct

polarity as marked inside the transmitter. For installation instructions,

see the 2000 Series installation & operation manual.

4. Insert the transmitter into the charger with transmitter charging

contacts facing toward the charger’s contact pins.

5. Power is supplied to the charging bay when the transmitter is set

into the unit; at this point the red indicator of each port lights.

(Note: If the red indicator does not light, poor contact may be

the cause; set the transmitter in the charger again.)

6. When the charge is completed, the red indicator is turned off.

(Note: Maximum charging time is about ten hours.)

7. The unit keeps charging with ultra-low current (maintenance charge)

until the transmitter is removed from the charger.

Produkt Specifikationer

Mærke:	Audio-Technica
Kategori:	Ikke kategoriseret
Model:	ATW-CHG2

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica ATW-CHG2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Audio-Technica Manualer

Audio-Technica AT-HDSL1 Manual

2 August 2025

Audio-Technica AT85EP Manual

2 August 2025

Audio-Technica AT6028 Manual

20 Juli 2025

Audio-Technica AT-VM670xSP Manual

19 Juni 2025

Audio-Technica AT-VM740xML Manual

18 Juni 2025

Audio-Technica AT-VM510xCB Manual

18 Juni 2025

Audio-Technica AT-VM520xEB Manual

18 Juni 2025

Audio-Technica AT-VM750xSH Manual

18 Juni 2025

Audio-Technica AT-VM520xEBH Manual

17 Juni 2025

Audio-Technica AT-VM610xMONO Manual

17 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

T'nB TCUNSENIOR Manual

15 September 2025

T'nB CACBTKIT Manual

15 September 2025

T'nB CARBTKIT6 Manual

15 September 2025

T'nB Flat ANINFLAT55 Manual

15 September 2025

15 September 2025

15 September 2025

15 September 2025

15 September 2025

T'nB MHFLEXDUAL Manual

15 September 2025

Bretford MDMTAB24 Manual

15 September 2025