Audix ANTDA4161 Manual

Audix TV antenne ANTDA4161

Læs gratis den danske manual til Audix ANTDA4161 (2 sider) i kategorien TV antenne. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Audix ANTDA4161, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
ACTIVE DIRECTIONAL ANTENNA
User Guide
ANTDA4161
ANTDA4161
DIMENSIONS
audixusa.com | 503.682.6933
©2016 Audix Corporation All Rights Reserved.
Audix and the Audix Logo are trademarks of
Audix Corporation.
Fig. 3
1.25 in / 32 mm
9.4 in / 238 mm
9.6 in / 245 mm
ANTDA4161
PRODUCT DESCRIPTION
The ANTDA4161 is an active remote antenna for use with the Performance
Series Wireless Systems. It offers an antenna gain stage of 60 dB, and an
amplifier gain stage of 15 dB. Having the ANTDA4161 allows antennas to be
placed up to 100’ (30 meters) away from the receiver without any loss of signal.
SPECIFICATIONS
Frequency Band 500 - 700 MHz
Antenna Gain 6 dB
Amplier Gain 5 dB or 13 dB
(dipswitch located inside
housing on antenna)
Input Impedance 50 Ohm
Output OIP3 > 38 dBm
Eective working Angle Approximately 90 degrees
Connector BNC
Cable RG58, 50 Ohm coaxial (not included)
Net Weight 8 ounces / 227 grams
SET UP
1 Determine whether to engage the 13 dB signal boost located inside the
electronics housing. There is a gain setting inside the booster box located
on the antenna (Figure 1). The default setting is 5 dB which covers up to 25’
of cable length. For longer runs (up to 100’), the 13 dB setting may be used.
The dipswitch is located inside the weather resistant booster box. Remove
the 6 Allen bolts and then set the dipswitch to 13 dB, then reattach the
cover and Allen bolts.
2 Mount the antenna system on to a mic stand. For permanent installations,
the antennas may be placed on a wall or hung from the ceiling.
3 Connect the coaxial cable from each of the inputs on the receiver to the
connector on the ANTDA4161. Be sure to use 50 Ohm cable.
4 Point and shoot the antennas directly at the transmitter source. (see figure 2)
5 Once the wireless system is in the performance mode, some
experimentation may be required to find the best position.
Mic Stand Adapter
ANTDA4161
ANTDA4161
Fig. 1
Fig. 2
ANTDA4161

Produkt Specifikationer

Mærke: Audix
Kategori: TV antenne
Model: ANTDA4161

Har du brug for hjælp?

Hvis du har brug for hjælp til Audix ANTDA4161 stil et spørgsmål nedenfor, og andre brugere vil svare dig


TV antenne Audix Manualer

Audix

Audix ANTDA4161 Manual

20 August 2024

TV antenne Manualer

Nyeste TV antenne Manualer

Philips

Philips SBCTT250 Manual

14 August 2025
Philips

Philips SDV5229 Manual

14 August 2025
One For All

One For All SV 9386 Manual

12 August 2025
Samsung

Samsung LA46B650T1R Manual

10 August 2025
RCA

RCA ANTB55EV Manual

1 August 2025
Emos

Emos J0806 Manual

1 August 2025
Emos

Emos J0690 Manual

31 Juli 2025
One For All

One For All SV9143 Manual

26 Juli 2025
Metronic

Metronic 416961 Manual

8 Juli 2025
Kathrein

Kathrein CAS 60 Manual

8 Juli 2025