Axxess AXABH-HN1 Manual


Læs gratis den danske manual til Axxess AXABH-HN1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Axxess AXABH-HN1, eller vil du spørge andre brugere om produktet?

Side 1/4
AXABH-HN1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/30/20 INSTAXABH-HN1
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
TABLE OF CONTENTS
Amplifier locations ................................................2
Connections ............................................................3
Honda Amplifier Bypass Harness 2016-Up
• Amplifier bypass harness
• Vehicle-specific harness to bypass the factory amplifier
• Allows loose wires to wire to an aftermarket amplifier
• Saves the installer unnecessary labor and wire
APPLICATIONS
Honda
Accord 2018-Up
Civic 2016-2018
CR-V 2017-2018
Insight 2019-Up
Pilot 2016-2018
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications
FEATURES


Produkt Specifikationer

Mærke: Axxess
Kategori: Ikke kategoriseret
Model: AXABH-HN1

Har du brug for hjælp?

Hvis du har brug for hjælp til Axxess AXABH-HN1 stil et spørgsmål nedenfor, og andre brugere vil svare dig