Axxess AXLOC4M-150 Manual

Axxess Ikke kategoriseret AXLOC4M-150

Læs gratis den danske manual til Axxess AXLOC4M-150 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Axxess AXLOC4M-150, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
AXLOC4M-150 AXLOC4M-150
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
AXLOC4M-150 AXLOC4M-150
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
REV. 12/13/19 REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
REV. 12/13/19 REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
A 4 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier Remote Generator.
The LOC is designed to convert (4) channels of speaker level audio into (4) channels of line
level audio that can be used by OEM amplifiers. It can also be used with OEM radios to add
aftermarket amplifiers. This device will also detect the presence of an audio signal and then
generate a +12V output that can be used to turn-on an aftermarket amplifier.
Features and specifications
The LOC is able to handle 150 watts per channel continuous input without over heating.
The input circuitry is designed to correct the crossover distortion commonly found on
standard LOCs while providing a high to low level step down of 6:1. Output audio level is
infinitely adjustable using the onboard, high quality potentiometers. The remote output
or amplifier trigger is rated at 500mA (+12V) and will easily handle an outboard relay if
additional current is needed. The remote output will trigger instantaneously when the LOC
detects a DC voltage on the white, left + audio input wire above 5V or a very low audio
signal. It will shut off 60 seconds after no signal is detected.
Installation
The LOC should be installed on a stereo’s speaker output wires or the output wires on an
OEM amplifier of up to 150 watts per channel. These wires can be found behind the stereo
in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM
speakers. Please refer to the wiring diagram for the input connection details.
Continued on next page
A 4 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier Remote Generator.
The LOC is designed to convert (4) channels of speaker level audio into (4) channels of line
level audio that can be used by OEM amplifiers. It can also be used with OEM radios to add
aftermarket amplifiers. This device will also detect the presence of an audio signal and then
generate a +12V output that can be used to turn-on an aftermarket amplifier.
Features and specifications
The LOC is able to handle 150 watts per channel continuous input without over heating.
The input circuitry is designed to correct the crossover distortion commonly found on
standard LOCs while providing a high to low level step down of 6:1. Output audio level is
infinitely adjustable using the onboard, high quality potentiometers. The remote output
or amplifier trigger is rated at 500mA (+12V) and will easily handle an outboard relay if
additional current is needed. The remote output will trigger instantaneously when the LOC
detects a DC voltage on the white, left + audio input wire above 5V or a very low audio
signal. It will shut off 60 seconds after no signal is detected.
Installation
The LOC should be installed on a stereo’s speaker output wires or the output wires on an
OEM amplifier of up to 150 watts per channel. These wires can be found behind the stereo
in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM
speakers. Please refer to the wiring diagram for the input connection details.
Continued on next page
A 4 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier Remote Generator.
The LOC is designed to convert (4) channels of speaker level audio into (4) channels of line
level audio that can be used by OEM amplifiers. It can also be used with OEM radios to add
aftermarket amplifiers. This device will also detect the presence of an audio signal and then
generate a +12V output that can be used to turn-on an aftermarket amplifier.
Features and specifications
The LOC is able to handle 150 watts per channel continuous input without over heating. The
input circuitry is designed to correct the crossover distortion commonly found on standard
LOCs while providing a high to low level step down of 6:1. Output audio level is infinitely
adjustable using the onboard, high quality potentiometers. The remote output or amplifier
trigger is rated at 500mA (+12V) and will easily handle an outboard relay if additional
current is needed. The remote output will trigger instantaneously when the LOC detects a
DC voltage on the white, left + audio input wire above 5V or a very low audio signal. It will
shut off 60 seconds after no signal is detected.
Installation
The LOC should be installed on a stereo’s speaker output wires or the output wires on an
OEM amplifier of up to 150 watts per channel. These wires can be found behind the stereo
in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM
speakers. Please refer to the wiring diagram for the input connection details.
Continued on next page
A 4 Channel Adjustable, Line Output Converter (LOC) with Built-in Amplifier Remote Generator.
The LOC is designed to convert (4) channels of speaker level audio into (4) channels of line
level audio that can be used by OEM amplifiers. It can also be used with OEM radios to add
aftermarket amplifiers. This device will also detect the presence of an audio signal and then
generate a +12V output that can be used to turn-on an aftermarket amplifier.
Features and specifications
The LOC is able to handle 150 watts per channel continuous input without over heating.
The input circuitry is designed to correct the crossover distortion commonly found on
standard LOCs while providing a high to low level step down of 6:1. Output audio level is
infinitely adjustable using the onboard, high quality potentiometers. The remote output
or amplifier trigger is rated at 500mA (+12V) and will easily handle an outboard relay if
additional current is needed. The remote output will trigger instantaneously when the LOC
detects a DC voltage on the white, left + audio input wire above 5V or a very low audio
signal. It will shut off 60 seconds after no signal is detected.
Installation
The LOC should be installed on a stereo’s speaker output wires or the output wires on an
OEM amplifier of up to 150 watts per channel. These wires can be found behind the stereo
in the dash, on the output of an OEM amplifier, or on the input terminals on the OEM
speakers. Please refer to the wiring diagram for the input connection details.
Continued on next page

Produkt Specifikationer

Mærke: Axxess
Kategori: Ikke kategoriseret
Model: AXLOC4M-150

Har du brug for hjælp?

Hvis du har brug for hjælp til Axxess AXLOC4M-150 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Axxess Manualer

Axxess

Axxess AXEU-MOST25 Manual

9 Oktober 2025
Axxess

Axxess AXBUCH-T1 Manual

9 Oktober 2025
Axxess

Axxess AXSSO-CH Manual

9 Oktober 2025
Axxess

Axxess AXAC-GM1 Manual

8 Oktober 2025
Axxess

Axxess AXDI-6524 Manual

8 Oktober 2025
Axxess

Axxess AX-AB-CH4 Manual

8 Oktober 2025
Axxess

Axxess AXBUCH-TYCAM36V Manual

8 Oktober 2025
Axxess

Axxess AXDSPX-FD3 Manual

8 Oktober 2025
Axxess

Axxess AXDSPX-TY4 Manual

8 Oktober 2025
Axxess

Axxess AXDSPX-VW2 Manual

8 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Dahua Technology

Dahua Technology DHL32-F600 Manual

28 Oktober 2025
Dahua Technology

Dahua Technology VTS5240B Manual

28 Oktober 2025
Dahua Technology

Dahua Technology HAC-HFW1230S-POC Manual

28 Oktober 2025
Dahua Technology

Dahua Technology HAC-HDW1400TLMQ-A Manual

28 Oktober 2025
Dahua Technology

Dahua Technology EVS7124D Manual

27 Oktober 2025
Dahua Technology

Dahua Technology XVR7816S-4KL-X-LP Manual

27 Oktober 2025
Dahua Technology

Dahua Technology HAC-HDW1220EM Manual

27 Oktober 2025
Dahua Technology

Dahua Technology ISC-M6550 Manual

27 Oktober 2025
Dahua Technology

Dahua Technology EVS7148D Manual

27 Oktober 2025
Dahua Technology

Dahua Technology HAC-HFW2249E-A Manual

27 Oktober 2025