Axxess AXSWCH-FD1 Manual


Læs gratis den danske manual til Axxess AXSWCH-FD1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Axxess AXSWCH-FD1, eller vil du spørge andre brugere om produktet?

Side 1/4
AXSWCH-FD1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/19/25 INSTAXSWCH-FD1
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
NOTE: Refer to the instructions included with
the aftermarket radio.
INTERFACE FEATURES
• Pre-wired AXSWC harness (AXSWC sold separately)
• Designed for SYNC
®
systems when removing 4.3” screen
• Retains factory backup camera
INTERFACE COMPONENTS
• AXSWCH-FD1 harness
• AXSWC interface (sold separately)
APPLICATIONS
TOOLS REQUIRED
• Wire cutter
Crimp tool and connectors
(example: butt-connectors, bell caps, etc.)
or
• Solder gun, solder, and heat shrink
• Tape
• Zip-ties
TABLE OF CONTENTS
Connections ............................................................2
Steering Wheel Control Harness
Fits Select Ford Models 2013-2019
Visit AxxessInterfaces.com for more detailed information about the product and
up-to-date vehicle specific applications
Ford
Escape ........................................................2013-2015
Transit ........................................................2015-2019


Produkt Specifikationer

Mærke: Axxess
Kategori: Ikke kategoriseret
Model: AXSWCH-FD1

Har du brug for hjælp?

Hvis du har brug for hjælp til Axxess AXSWCH-FD1 stil et spørgsmål nedenfor, og andre brugere vil svare dig